Product#: K262

1968 Camaro; Outer Quarter Ledge Reveal Moldings; Coupe; Pair; GM Licensed

Correct reproduction of the original custom outer quarter ledge reveal molding designed for use on 1968 Camaro coupe models. This reproduction is manufactured in quality stamped polished stainless steel. Originally installed...

Product#: 278C02A

1967-68 Mustang Fastback; Exterior Quarter Vent Assemblies; with Hardware

Reproduction of the original exterior quarter panel vents designed for use with 1967-1968 Mustang Fastback models. Each louvered panel is manufactured in quality stamped steel to OE specifications. These panels are located...

Product#: *R685

1968 Camaro; Outer Door / Quarter Reveal Molding Kit; w/OE Windowfelt Set; Standard Interior; Convertible

Exact reproduction of the original 1-1/2"outer door and quarter window reveal wide chrome moldings installed exclusively with 1968 Camaro convertible models with a standard interior. Each molding is manufactured to correct...

Product#: K280

1969 Camaro; Rear Quarter Panel Louvers; Pair; GM Licensed

Reproduction of the original quarter panel louvers found on 1969 Camaros. All 1969 Camaro models included a louvered section on the quarter panel for installation of these optional louvers. This OER® "show quality"...

Product#: 748695

1955 Chevy Bel Air, 150, 210; Rear Quarter Upper Paint Divider Moldings; 2 & 4 Door Sedan; Stainless Steel

Reproduction upper paint divider moldings for 1955 Chevrolet Bel Air, One-Fifty & Two-Ten Series 2 or 4 door sedan models. This molding mounts at the paint divide between the quarter panel molding and the rear quarter window...

Product#: 4229997

1967-68 Firebird, Trans Am; Rear Quarter Louver Trim; with Hardware; 12 Piece Set;

Excellent reproductions of the 1967-68 Firebird quarter panel ornaments which install on the front section of the quarter panel area. These are high quality die-cast reproductions of the second design ornaments which did not...

Product#: TF400866

1957 Chevrolet; Bel Air; Quarter Panel Top Fin Molding; Chrome; 2-Door Hardtop or Convertible; without Retainer; LH or RH

Reproduction quarter panel top fin chrome molding for 1957 Chevrolet Bel Air 2-Door hardtop or convertible models. These chrome plated die cast fin moldings are manufactured to factory specifications with correct contours for...

Product#: *ME1559

1971 Plymouth Cuda; Front Fender Gill Insert Set; 8 Piece Set

Reproduction of the original front fender gill insert unit for use with 1971 Plymouth Cuda models. Each reproduction gill is manufactured to factory specifications featuring chrome plating and black ribbed inserts that...

Product#: C2371

1964 Impala, Bel Air, Caprice; Rear Cove Quarter Panel Extension Molding; LH Driver Side

Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...

Product#: C2370

1964 Impala, Bel Air, Biscayne; Rear Cove Quarter Panel Extension Molding; Standard; RH Passenger Side

Reproduction of the original rear cove quarter panel extension molding designed for use on 1964 Impala and Full Size Chevrolet models with standard trim level. Molding is stamped correctly in quality aluminum material for an...

Product#: 7581158

1966-67 Chevy II, Nova; Outer Quarter Window Reveal Moldings; Pair;

Reproduction of the original quarter window trim moldings for use with 1966-67 Chevrolet Chevy II and Nova models. Each molding is manufactured in quality die-cast and features a chrome polished finish that will match right...

Product#: 3419712

1970 Challenger Rear Quarter Extension Molding ; with Hardware ; RH

Reproduction of the original quarter extension molding designed for use on 1970 Dodge Challenger models. Manufactured to original specifications in stamped aluminum replicating the original in fitment and appearance. Includes...

Product#: XP3280S

1970-72 Buick Skylark, GS; Molding; Rear Quarter Panel; Chrome; RH

Reproduction chrome extension molding made chrome plated pot metal for 1970-72 Buick Skylark, GS and GSX hardtop and convertible models. It mounts on the back of the quarter panel. RH Passenger side. Sold individually.

Product#: 7795051

1968 Camaro Rally Sport Lower Quarter Panel Molding; LH

Reproduction molding designed for use on all 1968 Camaro models with the Rally Sport option. Approximately 3/4" wide. Installs on the lower quarter panel section on the driver's side. This molding is the rear section of the 3...

Product#: 748693

1956-57 Chevrolet 150, 210; Rear Quarter Upper Paint Divider Moldings; Stainless Steel; Pair

Reproduction stainless steel upper paint divider moldings for 1956-57 Chevrolet One-Fifty & Two-Ten Series 2 and 4-door models. This molding is manufactured in stainless steel to exact factory specifications and designed to...

Product#: K263

1968 Chevy Camaro; Outer Quarter Ledge Reveal Moldings; Convertible ; Pair; GM Licensed

Correct reproduction of the original custom outer quarter ledge reveal molding designed for use on 1968 Camaro convertible models. This reproduction is manufactured in quality stamped polished stainless steel. Originally...

Product#: 3419713

1970 Challenger Rear Quarter Extension Molding ; with Hardware ; LH

Reproduction of the original quarter extension molding designed for use on 1970 Dodge Challenger models. Manufactured to original specifications in stamped aluminum replicating the original in fitment and appearance. Includes...

Product#: 3579592

1971-1974 Challenger Rear Quarter Extension Molding ; with Hardware ; RH

Reproduction of the original quarter extension molding designed for use on 1971-74 Dodge Challenger models. Manufactured to original specifications in stamped aluminum replicating the original in fitment and appearance....

Product#: 3579593

1971-1974 Challenger Rear Quarter Extension Molding ; with Hardware ; LH

Reproduction of the original quarter extension molding designed for use on 1971-74 Dodge Challenger models. Manufactured to original specifications in stamped aluminum replicating the original in fitment and appearance....

Product#: A1668

1959-60 Impala, Bel Air 2 Door Hardtop, Convertible Quarter Vertical Molding; Window Weatherstrip Retainer; Chrome; LH or RH

Reproduction molding unit for 1959-60 Chevrolet full size 2 door hardtop and convertible models that attaches directly to the front edge of the rear side quarter window vertically. This is a bright chrome trim molding which...

Product#: 7795050

1968 Camaro Rally Sport Lower Quarter Panel Molding; RH

Reproduction molding designed for use on all 1968 Camaro models with the Rally Sport option. Installs on the lower quarter panel section on the passengers side. Approximately 3/4" wide. This molding is the rear section of the...

Product#: 3912090

1967 Camaro Rally Sport Quarter Panel Molding; Lower ; RH

Reproduction molding designed for use on all 1967 Camaro models with the Rally Sport option. Measures approximately 3" wide. Installs on the lower quarter panel in front of the wheel opening on the passenger side....

Product#: 3912089

1967 Camaro Rally Sport Lower Quarter Panel Molding; LH

Reproduction molding designed for use on all 1967 Camaro models with the Rally Sport option. Measures approximately 3" wide. Installs on the lower quarter panel in front of the wheel opening on the drivers side. Installation...

Product#: XP3279S

1970-72 Buick Skylark, GS; Molding; Rear Quarter Panel; Chrome; LH

Reproduction chrome extension molding made chrome plated pot metal for 1970-72 Buick Skylark, GS and GSX hardtop and convertible models. It mounts on the back of the quarter panel. LH Driver side. Sold individually.

Product#: TF400509

1957 Chevrolet Bel Air 2 Door Quarter Panel Side Inserts With Chrome Crest Emblem & Bel Air Script

These beautiful inserts are precision cut to the original depth and dimension. These panels are complete with Bel Air script and crest emblems. Made in the USA! Fits: 1957 2 door Bel Air, hardtop, sedan, convertible, wagon...

Product#: L13525P

1958 Impala; Quarter Window Beltline Moldings; Convertible Models; Polished Stainless; LH and RH

Reproduction quarter window beltline moldings for 1958 Impala convertible models. These reproduction moldings are manufactured from high quality polished stainless steel to factory specifications. Beltline weatherstrip is...

Product#: L13056P1

1959 Impala; Quarter Panel Moldings; X-Flag Emblem Mounting Plate; 2-Door Hardtop or Convertible Models (front of Quarter Panel) 4-Door Models (on Rear Door); Polished Stainless; LH and RH; Replaces GM#"s 3764059, 3764060

Reproduction X-Flag emblem mounting plate moldings for all 1959 Impala models. These reproduction moldings are manufactured from high quality polished stainless steel to factory specifications. These moldings are located...

Product#: TF400974

1955-57 Chevrolet Passenger Car - Convertible Belt Moldings

Reproduction quarter belt moldings for 1955-57 convertible models. These are the moldings that are installed at the top of the quarter panel, and feature factory style contours and the correct stainless finish.

Product#: MB2251

1966-67 Dodge Charger Quarter Panel Molding; "J" Style Molding; Pair

Factory-style replacement quarter moldings for 1966-67 Charger models. These moldings are mounted vertically on the rear edge of the quarter panel. Manufactured in stamped aluminum to original specifications. Features the...

Product#: MB2253

1966 Dodge Coronet 500 Body Side Ornament Trim Set ; 8 Piece Set

Reproduction of the original body side ornament trim moldings designed for use on 1966 Coronet 500 models. The moldings feature the black and chrome grooved pattern on the front and include properly located mounting studs on...

Product#: B219230

1958 Impala Upper Quarter Panel Top Bead Molding; LH

Brighten the appearance of your 1958 Impala model by replacing the missing or damaged upper quarter panel top bead molding with this quality reproduction. This molding runs along the top edge of the left hand (drivers side)...

Product#: L13170P

1959 Impala; Quarter Panel Moldings; Front of Molding Small Extension; 2-Door Hardtop or Convertible; Polished Stainless; LH and RH

Reproduction quarter panel moldings (small front section) for 1959 Impala 2-door hardtop or convertible models. These reproduction leading edge 1/4 panel moldings are manufactured from high quality polished stainless steel to...

Product#: VF29034B

1947-48 Ford Sedan Coupe, Convertible; Quarter Trim

Made of high-grade stainless steel as original. Superb quality with flawless fit and finish. Looks and fits fantastic on 1942-46 Ford cars too. Ford made two styles of this trim. Ours features the high-point ridge just near...

Product#: TF400973

1955-57 Chevrolet Bel Air; Convertible Belt Molding; RH, Passenger Side

Reproduction quarter belt molding for 1955-57 Chevrolet Bel Air convertible models. This is the molding that installs at the top of the quarter panel, and features factory style contours and the correct stainless finish. Fits...

Product#: TF400972

1955-57 Chevrolet Bel Air; Convertible Belt Molding; LH, Driver Side

Reproduction quarter belt molding for 1955-57 Chevrolet Bel Air convertible models. This is the molding that installs at the top of the quarter panel, and features factory style contours and the correct stainless finish. Fits...

Product#: VF29034A

1947-48 Ford Tudor; Quarter Trim

Made of high-grade stainless steel as original. Superb quality with flawless fit and finish. Looks and fits fantastic on 1942-46 Ford cars too. Ford made two styles of this trim. Ours features the high-point ridge just near...

Product#: B219245

1958 Impala Quarter Panel "S" Molding; RH

Reproduction 1958 Impala quarter panel "S" molding, manufactured to factory specifications in stainless steel, as original.

Product#: B219240

1958 Impala Quarter Panel "S" Molding; LH

Reproduction 1958 Impala quarter panel "S" molding, manufactured to factory specifications in stainless steel, as original.

Product#: MCK5037

1969-72 Chevrolet Blazer; Rear Quarter Trim Mounting Bracket Set; w/Hardware

Rear Quarter Trim Mounting Bracket Set for 1969-1972 Chevrolet Blazer. Laser cut zinc plated 18 gauge steel brackets, 24 stainless bracket to body mounting screws and 18 chrome plated self tapping inner 1/4 trim mounting...

Product#: MP41211

1967-69 Plymouth Barracuda; Transition Molding; Front; Convertible; With Top Edge Molding

Front transition molding for those vehicles that have stainless trim along the top of the quarter glass and door glass, where this molding "transitions" between trim next to the quarter glass and the stainless boot molding.

Product#: C6566

1965-66 Impala, Bel Air, Caprice; Quarter Vertical Chrome Moldings ; 2 Door, Hrdtop, Cnvrtble ; Pair

Reproduction of the original vertical chrome moldings designed for use on 1965-66 Impala and full size Chevrolet 2 door hardtop and convertible models. This molding attaches directly to the front edge of the rear side quarter...

Product#: MA8801

1965 Plymouth Valiant; Sail Panel Molding; LH Driver Side

Reproduction roof pillar molding found at the base of the C-Pillar on 1965 Plymouth Valiant. Each molding is produced in a modern two-part alloy that will not pit like the old pot-metal materials of the 1960's. Sold...

Product#: ME1573

1970-71 Challenger Convertible Belt Moldings ; Pair

Reproduction of the original convertible belt moldings designed for use on 1970-71 Dodge Challenger models. Each molding features the correct chrome plating and contours like originals and mount to the top of the quarter...

Product#: GF32009

2010-14 Camaro; Quarter Window Chrome Trim; Shark Gills

Drake Muscle Cars' Quarter Panel Trim is made from ABS with a bright chrome or satin finish and black-shadow accents for an aggressive look and features 3M VHB adhesive backing for fast and secure installation.

Product#: 85L025

1987-93 Ford Mustang; GT; Front Quarter Panel Molding; RH; Ford Tooling

Reproduction of the original front quarter panel molding for use on 1987-93 Mustang GT models. Each molding is manufactured to factory specifications featuring correct contours and finish for proper fitment and appearance....

Product#: CS633

1963 Impala SS; Quarter Panel Molding Insert Set; Authentic Engine Turned Aluminum; LH and RH

Reproduction of the original Super Sport quarter panel molding aluminum inserts designed for use with 1963 Impala SS models. Each insert is manufactured from aluminum to factory specifications featuring "engine turned"...

Product#: T5517

1957-58 Chevrolet Cameo/GMC Suburban Carrier; Under Tail Lamp Trim; 4-Piece

Under tail lamp trim on your 1955-58 Chevrolet Cameo truck and GMC Suburban Carrier. This is the U shaped trim that fits below the tail lamp housing. 2 oieces below on each side make a U-shape under one tail lamp. Die cast...

Product#: B9027

1964 Chevrolet Impala; Rear Outer Quarter Panel "C" Moldings; RH and LH; Pair

Reproduction of the original exterior rear outer quarter panel "C" moldings for use with 1964 Chevrolet Impala models. Each molding is manufactured to correct factory specifications replicating the original in design and...

Product#: N1065

1963-64 Nova SS; Quarter Panel Peak Molding; LH Driver Side

Quality reproduction of the long sought after 1963-64 Nova Super Sport body side peak molding. These moldings run along the top edge of the body line on the quarter panel and then down the rear of the quarter panel. Replace...

Product#: C6768

1967-68 Impala 2 Door Hardtop; Quarter Vertical Chrome Moldings

Reproduction molding unit for full size 2 door hardtop models that attaches directly to the front edge of the rear side quarter window vertically. This is a bright chrome trim molding which is necessary to mount the vertical...

Product#: CM2450

1965 Impala; Rear Quarter Window Corner Trim Moldings; Coupe ; Pair; Made in the USA

Reproduction of the original rear quarter window corner trim moldings designed for use with 1965 Chevrolet Impala coupe models. Each molding is manufactured to original specifications featuring factory style contours,...

Product#: 29536A

1969-70 Ford Mustang; Coupe; Quarter Window Moldings

Reproduction quarter window moldings for 1969-70 Mustang coupe models. Also known as boomerang moldings, these are sold in pairs. Authentically reproduced for complete originality.

Product#: B223500

1961 Impala / Full-Size 2-Door Lower Quarter Panel Molding; RH

Replacing missing or damaged rear lower molding with this quality replacement molding will help restore the appearance of your 1961 Full-Size model. Designed and manufactured to factory specifications, each molding will...

Product#: VC9024

1941-48 Chevrolet; Stainless Steel Fender Skirt Moldings; 6-Piece Set

Reproduction fender skirt molding for 1941-48 Chevrolet Fleetline. This set includes 6 pieces which is enough to do 2 skirts. They measure 27?, 25-3/4? & 23-1/8?.

Product#: B9030L

1964 Impala; Quarter Panel Lower Molding; 2 Door Coupe, Convertible; LH Drivers Side

Reproduction of the original exterior quarter panel lower molding for use with 1964 Chevrolet Impala models. Each molding is manufactured to correct factory specifications replicating the original in design and appearance....

Product#: 85L121

1987-93 Ford Mustang; Hatchback; Quarter Window Trim Covers

This is a alternative for replacing your dry-rotted rear side windows. These black window molding covers fasten with trim adhesive. Sold in pairs for hatchbacks.

Product#: 63D330

1963 Chrysler; C-Panel Emblem; "330"

"330" C-Pillar Number Emblem Set

Product#: TR29076E

1966-77 Ford Bronco; Upper Rear Quarter Moulding; 1-1/4" Wide; RH; With Tire Carrier

Reproduction passenger side upper rear quarter panel molding for 1966-77 Ford Bronco. This trim piece installs upper rear bedside on Broncos equipped with swing spare tire carriers. Replaces Ford part# C8TZ-9729076-A....

Product#: C5914UR

1959 Impala; Quarter Panel Molding; RH Upper; 2-Door Hardtop or Convertible

Reproduction quarter panel molding for 1959 Impala 2-door models. Each molding is manufactured to factory specifications from quality polished stainless steel. Features the correct contours and polished finish. Fits LH lower...

Product#: C5914UL

1959 Impala; Quarter Panel Molding; LH Upper; 2-Door Hardtop or Convertible

Reproduction quarter panel molding for 1959 Impala 2-door models. Each molding is manufactured to factory specifications from quality polished stainless steel. Features the correct contours and polished finish. Fits LH upper...