Product#: F15923

Flowmaster; 3.5" Collector To 3" System; Header Collector Ball Flange Set

This header collector set takes the place of messy three-bolt, flange-type connections and allows for a leak-free and gasket-free ball-flange type connection. Made in USA Emission Note: 50- State Legal This part is legal for...

Product#: RE1023B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray; 1 Gallon

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1023C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 1 Gallon

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1023A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 1 Gallon

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: F15925

Flowmaster; 3" Collector To 2.5" System; Header Collector Ball Flange Set

This header collector set takes the place of messy three-bolt, flange-type connections and allows for a leak-free and gasket-free ball-flange type connection. Made in USA Emission Note: 50- State Legal This part is legal for...

Product#: MP700204

1966-71 Mopar - Hemi Intake Manifold Bolt Set

Service replacement intake bolt set for 1966-71 Hemi engines. Set includes the correct size fasteners to install a Hemi intake manifold. Sold as a set. Contents: 7 chrome plated 1/4"-20 x 3-3/8" bolts with washers 3 b lack...

Product#: MP700217

Mopar Small Block Engine - Exhaust Manifold Conical Washers - Sold Individually

Reproduction Small Block exhaust manifold conical washer for Mopar models. Thick conical washer used under every bolt and nut that secures exhaust manifold to the heads. Sold individually 10-12 washers required per engine.

Product#: RE1029A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 1 Quart

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: MP700246

1962-65 Mopar Street Wedge Engine - Exhaust Manifold Fastener Set (OE Style)

If you're after originality for your under-hood project, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds.

Product#: 66753

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 1" Long (Set of 12)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: 66755

PROFORM Wedge-Locking Header Bolts M8 Thread Diameter - 1.181" Long (Set of 12)

These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers bite into and grab the bottom of the bolt head and the top surface of the header. After...

Product#: 66754

PROFORM Wedge-Locking Header Bolts M8 Thread Diameter -.984" Long (Set of 12)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: DE010126

DEI Titanium Exhaust Wrap - 1" x 50 Foot Roll

Titanium exhaust wrap from DEI. Withstands 1800 of direct, and 2500 of intermittent heat. Extremely pliable for an easy install with no wetting necessary. Very durable with high resistance to abrasions, oil and chemicals, and...

Product#: RE2030A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 15 oz. Aerosol

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE2030C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 15 oz. Aerosol

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1021A

POR-15 High Temp; Heat-Resistant Paint; Black Velvet; 8 oz.Can

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1021C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 8 oz.Can

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: MM8273

Mopar Big Block Exhaust Manifold Sleeve Studs 6 Pieces

Mopar big block exhaust manifold sleeve studs for all 383, 400 and 440 engines. {specs} {fitment}

Product#: AR1427

ARP Mopar 340-360 Header Bolts - 5/16" Diameter - Stainless 300 - Hexhead

These ARP premium exhaust header hardware kits feature compact 12-point nuts to let you easily slip a socket close to the pipe. Studs are manufactured with a unique nut-starter nose that helps prevent cross-threading....

Product#: AR1428

ARP Mopar 340-360 Header Bolts - 5/16" Diameter - Stainless 300 - 12-Point

These ARP premium exhaust header hardware kits feature compact 12-point nuts to let you easily slip a socket close to the pipe. Studs are manufactured with a unique nut-starter nose that helps prevent cross-threading....

Product#: AR1426

ARP Mopar 340-360 Header Bolts - 5/16" Diameter - Black Oxide - 12-Point

These ARP premium exhaust header hardware kits feature compact 12-point nuts to let you easily slip a socket close to the pipe. Studs are manufactured with a unique nut-starter nose that helps prevent cross-threading....

Product#: MEM1007

1969-84 Mopar; V8 Exhaust Manifold to Air Cleaner Hose; 2" Diameter; Black

Reproduction exhaust manifold heat stove to air cleaner hose for various 1969-84 Mopar V8 engines. Manufactured to factory specifications in black for an original fit and appearance. Fits 318, 340, 360, 383, 400, and 440ci...

Product#: MN3159

Mopar Small Block LA Leakbuster Header Collector Gaskets

Reproduction header collector gaskets for models equipped with a small block LA engine. Manufactured to factory specifications featuring the correct 3" inner diameter, and 3 pre-drilled mounting holes.

Product#: MP700294

1968-70 Mopar Models with 340 Engine - Exhaust Manifold Sleeve Nut (5/16"- 24 x 2.50")

Reproduction exhaust manifold sleeve nuts for Mopar models. Order as needed.

Product#: TT1009

Thermo-Tec® 1" x 15" x 1/16" Thick Off White Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: E8513

1961-76 Mopar Hemi (426-572Ci) Hemi Engines - Edelbrock Head Bolt Set

Bolt set is mated to our new Victor Jr. cylinder heads designed for high output 650+ hp Chrysler 426-572 HEMI® engines. Features hex-head and stock replacement hardware.

Product#: MD4532

1966-71 Hemi Heat Riser Set

Replacement heat riser set for all 1966-71 Hemi models. This set is designed to fit on the right hand side manifold, and includes all necessary parts and hardware.

Product#: MEM1006

1970-71 Mopar B/E Body; 383/440; High Performance Exhaust Manifold Heat Stove And Hardware Set; LH Driver Side

Reproduction LH exhaust manifold heat stove and hardware set for various 1970-71 Mopar high performance 383ci and 440ci engines. Manufactured to factory specifications and finished in satin black for an original fit and...

Product#: MD4525

Exhaust Connector Set; 2-1/2"

This is a universal connector that can be used in various locations for the exhaust system. Measures 2-1/2" inner diameter, and includes mounting bolts. Each set is sold in pairs, enough to do a vehicle with dual exhaust.

Product#: RE1029C

POR-15 High Temp; Heat-Resistant Paint; Aluminum; 1 Quart

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: RE1029B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray; 1 Quart

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: MP700170

Mopar Big Block Long Exhaust Manifold Sleeve Nut

Correct 3/8-24 UNF x 2.84" hex head sleeve nut for Mopar big block exhaust manifolds. Sold each. Fits: 1968-70 340 Hp exhaust manifold 1962-65 Street wedge exhaust manifold; for use on 361, 383, and 426 big block b-b ody 1967...

Product#: 66751

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 3/4" Long (Set of 12)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: 21103

Hedman Hedders; 3-Bolt Header Flange Reducers; 3" To 2-1/2"; Mild Steel

3-bolt flange header reducers from Hedman Hedders. These reducers have two flat mating surfaces with a gasket for a leak-free joint. Necessary gaskets and hardware included.

Product#: 66752

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 3/4" Long (Set of 16)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: 66756

PROFORM Wedge-Locking Header Bolts 3/8"-16 Thread Diameter - 1" Long (Set of 16)

PROFORM Grade 8 (12.9 steel) header bolts are designed to keep bolts from backing off. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently torqued, the washers...

Product#: RE2030B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray; 15 oz. Aerosol

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: MP700245

1966-69 Mopar B-Body with 361/383 Std Performance Engines - Exhaust Manifold Fastener Set (OE Style)

If you're after originality for your under-hood project, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds. Model Applications: 1968-69 Road Runner, Super Bee 1 966-69...

Product#: RE1021B

POR-15 High Temp; Heat-Resistant Paint; Manifold Gray- 8 oz.Can

POR-15 High Temp Heat-Resistant Paint is capable of withstanding extreme temperatures up to 1200°F / 648.8°C and will resist cracking, chipping, and peeling. This high temperature coating is also extremely weather,...

Product#: 66757

PROFORM Wedge-Locking Collector Bolts & Nuts 3/8"-16 Thread Diameter - 1" Long (Set of 6)

PROFORM Grade 8 (12.9 steel) exhaust collector bolts and nuts are designed to keep bolts from getting loose. These permanently assembled bolts feature special washers with super-hardened serrated teeth that, when sufficiently...

Product#: MP700295

Mopar Big Block Engine - Short Exhaust Manifold Sleeve Nut (3/8"- 24 x 1.94")

Reproduction exhaust manifold sleeve nuts for Mopar models. Order as needed.

Product#: AR1425

ARP Mopar 340-360 Header Bolts - 5/16" Diameter - Black Oxide - Hexhead

These ARP premium exhaust header hardware kits feature compact 12-point nuts to let you easily slip a socket close to the pipe. Studs are manufactured with a unique nut-starter nose that helps prevent cross-threading....

Product#: DE010128

DEI Titanium Exhaust Wrap - 1" x 15 Foot Roll

Titanium exhaust wrap from DEI. Withstands 1800 of direct, and 2500 of intermittent heat. Extremely pliable for an easy install with no wetting necessary. Very durable with high resistance to abrasions, oil and chemicals, and...

Product#: 21114

Hedman Hedders; 3" Ball & Socket Header Reducers; 3" To 2-1/4"; Mild Steel

3" ball and socket style header reducers from Hedman Hedders. 2-1/4" Exhaust System, Mild Steel. Necessary hardware included. {specs}

Product#: TT1016

8 Cylinder Quick Wrap Exhaust Jackets

The new quick-wrap, high-velocity Exhaust Jackets™ are an innovative way to insulate and block radiant heat. The jackets cover the header tubes vertically allowing for a consistent fit. The fit allows the exhaust system...

Product#: TT1017

V6-V8 Header Manifold Blanket™

The Header Manifold Blanket™ provides excellent heat-retention for exhaust headers and manifolds. This flexible heat shield simply clips into place on the upper portion of the header. The fabric side of the material...

Product#: TT1007

24" x 40" Muffler/Catalytic Heat Shield

The Muffler/Catalytic Converter Heat Shield™ is made up of woven silica with a flexible mylar finish. The highly-reflective heat shield can be installed between the catalytic converter, muffler, or any other component...

Product#: TT1015

4 / 6 Cylinder Quick Wrap Exhaust Jacket

This new quick-wrap, high-velocity Exhaust Jacket™ is an innovative way to insulate and block radiant heat. The jacket covers the header tubes vertically allowing for a consistent fit. The fit allows the exhaust system...

Product#: TT1014

Thermo-Tec® 2" x 50" x 1/16" Thick Graphite Black Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: TT1012

Thermo-Tec® 2" x 50" x 1/16" Thick Off White Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: TT1013

Thermo-Tec® 1" x 50" x 1/16" Thick Graphite Black Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: MN2338

Mopar Exhaust Manifold to Headpipe Flange - 2-1/2" i.d. with 4" Center to Center on Bolt Holes

These flanges may be needed on custom exhaust builds to connect the exhaust manifold to the head pipe. Made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required. No te:...

Product#: TT1010

Thermo-Tec® 1" x 50" x 1/16" Thick Off White Original Exhaust Insulating Wrap™

The original Exhaust Insulating Wrap™ was developed over 25 years ago by Thermo-Tec®. Wrapping headers maintains hotter exhaust gases that exit the system faster through decreased density. Increased exhaust...

Product#: HW719311

2" x 50" x 1/16" Thick Black Insultherm Vermiculute Coated Fiberglass Header Wrap

Insultherm Header Wrap is an extremely high temperature resistant wrap used to insulate hot gases in automotive exhausts. Vermiculite Coated, Heavy Weight Braided Fiberglass High Temperature Resistant Easy to Install Resists...

Product#: HW719312

2" x 50" x 1/16" Thick Natural Insultherm Vermiculute Coated Fiberglass Header Wrap

Insultherm Header Wrap is an extremely high temperature resistant wrap used to insulate hot gases in automotive exhausts. Vermiculite Coated, Heavy Weight Braided Fiberglass High Temperature Resistant Easy to Install Resists...

Product#: MN2337

Mopar Exhaust Manifold to Headpipe Flange - 2-1/4" i.d. with 3-1/2" Center to Center on Bolt Holes

These flanges may be needed on custom exhaust builds to connect the exhaust manifold to the head pipe. Made from thick 3/8" steel material that is much less likely to warp than common 1/4" exhaust flanges. 2 required. Note:...

Product#: HW719314

2" x 25" x 1/16" Thick Natural Insultherm Vermiculute Coated Fiberglass Header Wrap

Insultherm Header Wrap is an extremely high temperature resistant wrap used to insulate hot gases in automotive exhausts. Vermiculite Coated, Heavy Weight Braided Fiberglass High Temperature Resistant Easy to Install Resists...

Product#: HW719302

1" x 50" x 1/16" Thick Natural Insultherm Vermiculute Coated Fiberglass Header Wrap

Insultherm Header Wrap is an extremely high temperature resistant wrap used to insulate hot gases in automotive exhausts. Vermiculite Coated, Heavy Weight Braided Fiberglass High Temperature Resistant Easy to Install Resists...

Product#: 66341

Black Oxide Small Hex Head 3/8"- 16 x 3/4" Header Bolt Set

Working in a tight space? This small head bolt set is designed to replace regular hex head bolts for easier access and fewer skinned knuckles. Sold as a set of 12

Product#: 60406

Painless Oxygen Sensor Bung Fitting

Direct weld-in oxygen sensor fitting for all fuel injection systems. Fits TBI, TPI, CMFI, LT1, LSX, 5.0L and most other oxygen sensors. {specs}