1968-70 Charger, Coronet, GTX, Road Runner; Muffler Hangers; 2-1/4"; Pair
Reproduction of the original style muffler hangers designed for use with for all 1968-70 Dodge and Plymouth B Body models as listed. These hangers bolt to the floor pan mounting bracket, at the same time support and clamp the...
1968-70 Charger, Coronet, GTX, Road Runner; Muffler Hangers; 2-1/4"; Pair
Classic $59.99 pr
1967-69 Hemi & 440 2-1/4" Tailpipe Hangers-Pair
Replacement tail pipe hangers for 1967-69 Hemi & 440 B-Body models. These hangers bolt to the floor pan, and at the same time support & clamp the tailpipe to the muffler. Made in the USA.
1971-74 Mopar B/E-Body Tailpipe Hanger RH
This is the right side hanger mounted up by the shock absorber on most B and E-Body applications. Will fit 1971-74 B-Body and 1971-73 E-Body models.
71-74 B-Body Exhaust Tip Hangers Pair
These hangers bolt to the rear end of the rear frame rail. For all 71-74 B-Body models with dual exhaust. Made in the USA.
1966-70 Plymouth/Dodge B-Body; Exhaust Floor Pan Bracket Kit; LH Driver Side
1966-70 Plymouth/Dodge B-Body exhaust floor pan bracket set. This exhaust floor pan bracket kit is a zinc coated factory replacement that bolts directly on the left (driver side) floor pan. The muffler hanger bolts to this...
1966-70 Plymouth/Dodge B-Body; Exhaust Floor Pan Bracket Kit; LH Driver Side
Classic $68.99 ea
Heavy Duty Exhaust Clamp; 2-1/4"; 3/8" Thread U-Bolt
Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering. {specs} {fitment}
Replacement Q-clamps for various Mopar vehicles. Q-clamps were installed at the rear of the vehicle to secure the exhaust tips to the tailpipes.
1971 Dodge, Plymouth B-Body; Resonator Straps; Pair
Reproduction of the original resonator straps designed for use with 1971 Dodge and Plymouth B body models. These reproduction straps hold the resonators and give them additional support. Sold in pairs. {fitment}
Pypes Stainless Steel Exhaust Band Clamp; Butt Connector; 3" Diameter X 3" Wide
Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...
Pypes Stainless Steel Exhaust Band Clamp; Butt Connector; 3" Diameter X 3" Wide
Classic $45.99 ea
Pypes Stainless Steel Exhaust Band Clamp Butt Connector; 2.5" Diameter X 3" Wide
Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...
Pypes Stainless Steel Exhaust Band Clamp Butt Connector; 2.5" Diameter X 3" Wide
Classic $35.99 ea
Standard Duty Exhaust Clamp; 2"; 5/16" Thread U-Bolt
Replacement style clamps for use with most applications requiring a 2" exhaust clamp.
Mopar Exhaust Manifold to Headpipe Gasket - 2-1/2" i.d. With 4" Center to Center of Bolt Holes
This gasket connects the exhaust manifold to the head pipe. The composite metal design is excellent for all applications and can be removed and reused unlike other gasket materials. Note: 2-1/2" i.d. with 4" cente r to center...
Mopar Exhaust Manifold to Headpipe Gasket - 2-1/2" i.d. With 4" Center to Center of Bolt Holes
Classic $14.99 ea
Proform 3" Soft Conforming Aluminum Collector Gasket Set
Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts. {fitment}
Hooker; Collector Ring Kit for 3-1/2" Collectors
Hooker collector rings enable the header builder to adapt Hooker collector extensions or reducers to the basic collector. The kit includes two 3-bolt rings, matching gaskets and six bolts.
Heavy Duty Exhaust Clamp; 2-1/2"; 3/8" Thread U-Bolt
Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering. {specs} {fitment}
Standard Duty Exhaust Clamp; 2-1/4"; 5/16" Thread U-Bolt
Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering. {specs} {fitment}
Pypes Stainless Steel Exhaust Band Clamp; 2.5" Diameter X 1" Wide
Pypes stainless steel band clamp & band clamp butt connectors make installing and removing exhaust pipes a breeze. The band clamp is perfect for securing slip-fit style joints and exhaust tips, while the butt connectors are a...
1967-69 Camaro, 1968 Nova, 1974-75 Impala; Exhaust Clamp; 2 1/4"; Saddle Style; OE Material
Correct reproduction of the original "saddle-style" 2 1/4" muffler clamp for use with various 1967-68 Camaro, 1969 Camaro (with dual exhaust, chambered exhaust), 1968 Nova (with dual exhaust), and 1974-75 Impala, Bel Air,...
1967-69 Camaro, 1968 Nova, 1974-75 Impala; Exhaust Clamp; 2 1/4"; Saddle Style; OE Material
Classic $9.99 ea
1964-81 Camaro, Firebird, Chevelle, Nova, Impala; Exhaust Clamp; 2"; Saddle Style; OE Material
Correct reproduction of the original "saddle-style" 2" muffler clamp for use with various 1964-81 Camaro, Firebird, Nova, Chevelle, Impala, Bel Air, and Caprice models as listed. Each clamp is manufactured with quality OE...
1964-81 Camaro, Firebird, Chevelle, Nova, Impala; Exhaust Clamp; 2"; Saddle Style; OE Material
Classic $9.99 ea
Heavy Duty Exhaust Clamp; 3"; 3/8" Thread U-Bolt
Correct replacement style clamps for use with most applications. Please check your applications carefully before ordering. {specs} {fitment}
1968-70 B-Body Except Charger Exhaust Tip Hangers Pair
These hangers bolt to the rear end of the rear frame rail. For all 1968-74 B-Body models with dual exhaust. Made in the USA.
Exhaust Clamp; 2-1/2" ; with Chambered or Aluminized Exhaust; Stainless Steel
Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps. {fitment}
Exhaust Clamp; 2-1/2" ; with Chambered or Aluminized Exhaust; Stainless Steel
Classic $24.99 ea
Mopar Small Block LA Leakbuster Header Flange Gaskets
Replacement header flange gaskets for models equipped with a small block LA engine. Eliminate that annoying ticking sound from your header flange! This header flange gasket is made out of graphite foil with a stainless metal...
Exhaust Clamp; Stainless Steel; 2-1/4"; 3/8" Thread U-Bolt
Stainless steel exhaust clamps are now available for chambered or aluminized exhaust systems. This stainless steel clamp offers long-lasting effectiveness over the original style non-coated clamps. {specs} {fitment}
1967-92 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2"; Stainless Steel; Each
Reproduction of the original style exhaust clamp designed for use on various early models GM vehicles. Each clamp is manufactured in quality stainless steel replicating the original design for an authentic appearance. Great...
1967-92 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2"; Stainless Steel; Each
Classic $13.99 ea
Proform 2-1/2" Soft Conforming Aluminum Collector Gasket Set
Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.
Why bolt up your new side pipe exhaust system with those rusty old clamps you've got laying around. Finish off your exhaust system with these stylish chrome clamps. Sold individually.
Proform 3-1/2" Soft Conforming Aluminum Collector Gasket Set
Soft conforming aluminum gaskets easily conform to the collector flanges for a superior seal. Each set comes with 2 gaskets and six nuts and bolts.
Exhaust Clamp; Cadmium Plated; 2-1/2"; 3/8" Thread U-Bolt
Plated exhaust clamps now available for chambered or aluminized exhaust systems that offer long-lasting effectiveness over the original style non-coated clamps. {specs} {fitment}
1964-74 Camaro, Chevelle, Nova; Exhaust Clamp; 2 1/4"; "Guillitone" Style; OE Material
Correct reproduction of the original "Guillotine-style" - 2 1/4" muffler clamp for use with 1964-66 Chevy / GMC pickup trucks, 1967-74 Camaro, Chevelle, and Nova dual exhaust models. Each clamp is manufactured with quality OE...
1964-74 Camaro, Chevelle, Nova; Exhaust Clamp; 2 1/4"; "Guillitone" Style; OE Material
Classic $10.99 ea
1930-2012 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2 1/4"; Cadmium Plated; Each
Reproduction of the original style exhaust clamp designed for use on various early models GM vehicles. Each 2 1/4" clamp is manufactured in quality stamped steel and cadmium plated replicating the original design for an...
1930-2012 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2 1/4"; Cadmium Plated; Each
Classic $4.99 ea
Mopar Exhaust Manifold Flange Gasket - 2-1/2" (2 req"d)
These flanges connect the exhaust manifold to the head pipe. Black asbestos material, 1/16" thk. 2-1/2" I.D; 4" center-to-center flange bolts. 2 required.
1967-74 Camaro, Chevelle, Nova; Exhaust Clamp; 2"; "Guillitone" Style; OE Material
Correct reproduction of the original "Guillitone-style", 2" muffler clamp for use with 1967-74 Camaro, Chevelle, and Nova models as listed. Each clamp is manufactured with quality OE cold-rolled steel material, offering the...
1967-74 Camaro, Chevelle, Nova; Exhaust Clamp; 2"; "Guillitone" Style; OE Material
Classic $8.99 ea
1930-2012 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2"; Cadmium Plated; Each
Reproduction of the original style exhaust clamp designed for use on various early models GM vehicles. Each clamp is manufactured in quality stamped steel and cadmium plated replicating the original design for an authentic...
1930-2012 Buick, Chevy, Pontiac, Olds; Exhaust Clamp; 2"; Cadmium Plated; Each
Classic $4.99 ea
Correct replacement style Walker exhaust clamp for use with most applications requiring 2-1/8" clamp. Please check your applications carefully before ordering.
Mopar Exhaust Manifold Flange Gasket - 2-1/4" (2 req"d)
These flange gaskets connect the exhaust manifold to the head pipe. Flanges made from 1/16" material and has a 2-1/4" diameter hole in the center. 2 required.
68-71 426 Hemi Exhaust Manifold Fastener Set OE Style
If you demand originality for your vehicle, don't settle for anything less than this complete set of OE-type bolts to mount your exhaust manifolds.
1968-70 Mopar 340 HP Exhaust Manifold Fastener Set OE Style
If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds.
1967 Mopar 440 HP Exhaust Manifold Fastener Set OE Style
If you demand originality for your vehicle, don't settle for anything less than this complete set of OE-type bolts to mount your exhaust manifolds.
10 Piece Stainless Steel Snap Strap Set
Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Six 9" straps Four...
68-74 Mopar 383/440 HP Exhaust Manifold Fastener Set OE Style
If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds. Applications: 1968-74 Coronet 1968-74 Super Bee 1968-74...
1971-74 Mopar 340/360 HP Exhaust Manifold Fastener Set OE Style
If you are seeking originality for your under-hood restoration, don't settle for anything less than these complete sets of OE-type bolts to mount your exhaust manifolds.
12 Piece Stainless Steel Snap Strap Set
Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA Set includes: Eight 9" straps Four...
12 Piece 9" Stainless Steel Snap Strap Set
Quality stainless steel straps with the dependable multi-lock system. The narrow width straps come with the multi-lock already attached - just insert the end and pull to tighten. Made in USA