Product#: MN2096

Mopar 383/440 Wedge ARP Stainless Steel With Hex Head Engine / accessory Fastener Set

This engine and accessory fastener set will give you everything you need to attach components and accessories from a long block on up and is packaged in one economical set. Set include fasteners for the following: Intake...

Product#: MN2093

Mopar 318/340/360 Wedge ARP Stainless Steel With 12-Point Head Engine / accessory Fastener Set

This engine and accessory fastener set will give you everything you need to attach components and accessories from a long block on up and is packaged in one economical set. Set include fasteners for the following: Intake...

Product#: MN2097

Mopar 383/440 Wedge ARP Stainless Steel With 12 Point Head Engine / accessory Fastener Set

This engine and accessory fastener set will give you everything you need to attach components and accessories from a long block on up and is packaged in one economical set. Set include fasteners for the following: Intake...

Product#: MN2095

Mopar 318/340/360 Wedge ARP Black Oxide With 12 Point Head Engine / accessory Fastener Set

This engine and accessory fastener set will give you everything you need to attach components and accessories from a long block on up and is packaged in one economical set. Set include fasteners for the following: Intake...

Product#: MN2098

Mopar 383/440 Wedge ARP Black Oxide With Hex Head Engine / accessory Fastener Set

This engine and accessory fastener set will give you everything you need to attach components and accessories from a long block on up and is packaged in one economical set. Set include fasteners for the following: Intake...

Product#: AR1432

Mopar 318 / 340 /360 ARP Stainless 300 With 12-Point Head Oil Pan Stud Set

The engineers at ARP developed these unique oil pan studs to install a pan and seal it properly. The studs have a radiused bullet nose that serves to locate the pan rails and allow the nuts to be installed without...

Product#: 81305

Chevrolet Big Block Milodon Oil Pan Stud And Nut Set

Undoubtedly the most professional method of attaching an oil pan is through the use of Milodon's pan stud & nut set which includes heat-treated studs with rolled threads and special nuts with built in serrated washer face....

Product#: MN2412

1964-76 Chrysler, Dodge, Plymouth; Crankshaft Pulley Bolt Set; Big Block

This specialty bolt kit is used to attaching the lower crankshaft pulley to the damper on 1964-76 Chrysler, Dodge, and Plymouth big block engines. These are a unique bolts, since the centering ring on big block dampers is...

Product#: MD7141

1964-74 Plymouth, Dodge B, C, E-Body; Engine Mounts to K Member and Support Brackets Bolt Kit

Reproduction of the original style bolts for use with 1966-72 Dodge and Plymouth B, C, and E body models. This bolt kit includes all the bolts, nuts and washers needed to attach your engine mounts to the both the K member and...

Product#: MN2155

Mopar V8 Motor Mount Nuts And Washers

This nut installs a bolt directly in the center of the motor mount bracket to attach it to the frame mount. Made from steel like original. Sold as a pair.

Product#: AR62275

Stainless Hexhead Bolts 5/16"-18 X.750 5-Pack

Product#: MN2092

Mopar 318/340/360 Wedge ARP Stainless Steel With Hex Head Engine / accessory Fastener Set

This engine and accessory fastener set will give you everything you need to attach components and accessories from a long block on up and is packaged in one economical set. Set include fasteners for the following: Intake...

Product#: MN2099

Mopar 383/440 Wedge ARP Black Oxide With 12 Point Head Engine / accessory Fastener Set

This engine and accessory fastener set will give you everything you need to attach components and accessories from a long block on up and is packaged in one economical set. Set include fasteners for the following: Intake...

Product#: MN2094

Mopar 318/340/360 Wedge ARP Black Oxide With Hex Head Engine / accessory Fastener Set

This engine and accessory fastener set will give you everything you need to attach components and accessories from a long block on up and is packaged in one economical set. Set include fasteners for the following: Intake...

Product#: MDP83016

Chrysler 383-440; Milodon; Engine Bolt Kit w/o Head Bolts

Comprehensive engine bolt kit from Milodon for Mopar 383, 440 and 426 Hemi Carb and valve cover studs have thread starter noses for easy assembly. Intake and header bolts use a reduced size 3/8" head to allow greater access...

Product#: AR1431

Mopar 318 / 340 /360 ARP Stainless 300 With Hexhead Oil Pan Stud Set

The engineers at ARP developed these unique oil pan studs to install a pan and seal it properly. The studs have a radiused bullet nose that serves to locate the pan rails and allow the nuts to be installed without...

Product#: AR1430

Mopar 318 / 340 /360 ARP Black Oxide With 12-Point Head Oil Pan Stud Set

The engineers at ARP developed these unique oil pan studs to install a pan and seal it properly. The studs have a radiused bullet nose that serves to locate the pan rails and allow the nuts to be installed without...

Product#: AR1429

Mopar 318 / 340 /360 ARP Black Oxide With Hexhead Oil Pan Stud Set

The engineers at ARP developed these unique oil pan studs to install a pan and seal it properly. The studs have a radiused bullet nose that serves to locate the pan rails and allow the nuts to be installed without...

Product#: MN5010

1963-74 Dodge, Plymouth B/E-Body; Power Master Cylinder; Aluminum; Mopar Performance Style

This is a new (not rebuilt) Mopar performance-style dual reservoir 1-1/32" bore disc brake master cylinder. These ultra light-weight (2.3lb) master cylinders are a must when adding disc brakes to your vintage muscle car. It...

Product#: MN2415

1960-76 Dodge, Plymouth; Engine Support Bracket Bolt Set; Big Block Chrysler; B/RB 361, 383, 400, 413, 426 Wedge, 440

These factory style bolts attach your engine support brackets to the motor mount ears on the side of your engine block. Made from high strength steel, this set features correct thin style washers and fine thread bolts as...

Product#: MN2154

Mopar V8 Motor Mount Bolts

This bolt installs directly in the center of the motor mount bracket to attach it to the frame mount. Made from steel like original. Sold as a pair.

Product#: AR1443

Mopar 5.7L / 6.1L Hemi Harmonic Balancer Bolt Set

As the crankshaft flexes and twists, the balancer absorbs incredible kinetic energy. To ensure that the balancer stays locked in position, use ultra strong 200,000 psi bolts from ARP that let you exert maximum clamping force....

Product#: AR1441

Mopar 318 - 440 Wedge & 426 Hemi With Thin Damper Harmonic Balancer Bolt Set

As the crankshaft flexes and twists, the balancer absorbs incredible kinetic energy. To ensure that the balancer stays locked in position, use ultra strong 200,000 psi bolts from ARP that let you exert maximum clamping force....

Product#: AR1442

Mopar 318 - 440 Wedge With Thick Damper Harmonic Balancer Bolt Set

As the crankshaft flexes and twists, the balancer absorbs incredible kinetic energy. To ensure that the balancer stays locked in position, use ultra strong 200,000 psi bolts from ARP that let you exert maximum clamping force....

Product#: MN2184

1960-76 Chrysler, Plymouth, Dodge; Intermediate Shaft Bushing; Bronze

Intermediate shaft bushings support the intermediate shaft and are pressed into the block. While replacing your intermediate shaft, don't forget to replace the bushing as well. Our aftermarket bronze bushings are a...

Product#: 17973

Zinc Finish Small Hex Head 3/8" - 16 x 1" Header Bolt Set

Working in a tight space? This small head bolt set is designed to replace regular hex head bolts for easier access and fewer skinned knuckles. Sold as a set of 12

Product#: MN2188

1960-76 Dodge, Plymouth; Engine Block To Head Dowel Pins; 4 Piece Set

Reproduction of the original style dowel Pins that fit into the deck and align the cylinder heads during assembly. These should be replaced whenever the deck is surfaced on a block. These dowel pins can also be used for the...

Product#: 17970

Zinc Finish Small Hex Head 3/8" - 16 x 3/4" Header Bolt Set

Working in a tight space? This small head bolt set is designed to replace regular hex head bolts for easier access and fewer skinned knuckles. Sold as a set of 12

Product#: AR62175

Stainless Hexhead Bolts 1/4"-20 X.750 5-Pack

Product#: MN2090

Mopar 273/318/340/360 Wedge ARP Cylinder Head Studs

These cylinder head stud sets are made from premium grade 8740 alloy and are rated at 200,000 psi. Using studs will make it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently...

Product#: 81151

Chevrolet Big Block / Pontiac 350-455 / Mopar 318-360 Milodon Windage Tray Install Set

Windage tray install set is required to properly mount the tray assembly. The adjustable mounting position allows the tray to work at its maximum potential by being as close as possible to the rotating assembly (min.100") and...

Product#: MN2088

Mopar 273/318/340/360 Wedge Arp® Cylinder Head Bolts

Cylinder head bolts are available with reduced wrenching hex head and features a wide flange that eliminates the need for valve train removal to facilitate cylinder head retorquing. These high performance bolts are rated...

Product#: AK123A

Chevrolet Big Block; Oil Pan Bolt Set; Polished Chrome

Polished and chromed oil pan bolts will add a custom look to your oil pan while assuring high quality. Includes all necessary flat and internal tooth lock washers. (22) 5/16"-18 x 3/4" bolts.

Product#: AR40182

Stainless Steel Oil Pan Bolts Hex Head

ARP's premium grade pan bolts combine sealing efficiency with good looks. Made in USA Those who desire a dazzling engine will no doubt prefer fasteners made of ARP's specially alloyed Sta inless 300 material, which has the...

Product#: AR43582

396-454ci Chevrolet Big Block Chevrolet Big Block Stainless Steel Hex Head Oil Pan Bolt Set

ARP's premium grade oil pan bolts combine sealing efficiency with good looks. Made in USA Includes washers. Applications: 1966-69 7.0L / 427ci Mark IV Chevrolet big block 1966-70 6.5L / 396ci Mark IV Chevrolet big block...

Product#: AR40181

Stainless Steel Oil Pan Bolt Set 12 Point

ARP's premium grade pan bolts combine sealing efficiency with good looks. Made in USA Those who desire a dazzling engine will no doubt prefer fasteners made of ARP's specially alloyed Sta inless 300 material, which has the...

Product#: MN2020

Mopar Performance Big Block Timing Chain Cover Bolt Set

Package includes a complete set of chrome bolts for chrome timing chain covers on all B/RB 1958-78 big block and 426 Hemi engines. Includes 8 bolts and 4 chrome washers per set.

Product#: MN2413

1964-76 Chrysler, Dodge, Plymouth; High Volume Oil Pump Bolt Set; Big Block

Reproduction of the original style bolts for use when installing a Melling M63HV High Volume Oil Pump. Because the Melling High Volume pumps use taller rotors and a larger body, for proper thread depth engagement when bolting...

Product#: 66341

Black Oxide Small Hex Head 3/8"- 16 x 3/4" Header Bolt Set

Working in a tight space? This small head bolt set is designed to replace regular hex head bolts for easier access and fewer skinned knuckles. Sold as a set of 12

Product#: G5626

1/2"-13 Lock Nut

This 1/2"-13 zinc plated steel lock nut is sold as each.

Product#: MN2091

Mopar 383/400/413/426/440 Wedge Cylinder Head Studs - W/Factory Heads Or Edelbrock RPM Heads

These cylinder head stud sets are made from premium grade 8740 alloy and are rated at 200,000 psi. Using studs will make it much easier to assemble an engine, especially a racing powerplant which must be serviced frequently...

Product#: AK123B

1965-74 Chevrolet Big Block; Oil Pan Bolt Set; Polished Stainless Steel

Polished stainless steel oil pan bolts will add a custom look to your oil pan while assuring high quality. Includes all necessary flat and internal tooth lock washers. (22) 5/16"-18 x 3/4" bolts.

Product#: MN2089

Mopar 383/400/413/426/440 Wedge Cylinder Head Bolts - W/Factory Heads Or Edelbrock RPM Heads

Cylinder head bolts are available with reduced wrenching hex head and features a wide flange that eliminates the need for valve train removal to facilitate cylinder head retorquing. These high performance bolts are rated...

Product#: AR43581

396-454ci Chevrolet Big Block Stainless Steel 12 Point Head Oil Pan Bolt Set

ARP's premium grade oil pan bolts combine sealing efficiency with good looks. Made in USA Includes washers. Applications: 1966-69 7.0L / 427ci Mark IV Chevrolet big block 1966-70 6.5L / 396ci Mark IV Chevrolet big block...

Product#: 81320

Milodon Pontiac Stud & Nut Set

Undoubtedly the most professional method of attaching an oil pan is through the use of Milodon's pan stud & nut set which includes heat-treated studs with rolled threads and special nuts with built in serrated washer face....

Product#: AR20181

Black Oxide Oil Pan Bolts 12 Point

ARP's premium grade oil pan bolts combine sealing efficiency with good looks. Includes washers.

Product#: AR23581

396-454ci Chevrolet Big Block Black Oxide 12 Point Head Oil Pan Bolt Set

ARP's premium grade oil pan bolts combine sealing efficiency with good looks. Made in USA Includes washers. Applications: 1966-69 7.0L / 427ci Mark IV Chevrolet big block 1966-70 6.5L / 396ci Mark IV Chevrolet big block...

Product#: AR23582

396-454ci Chevrolet Big Block Black Oxide Hex Head Oil Pan Bolt Set

ARP's premium grade oil pan bolts combine sealing efficiency with good looks. Made in USA Includes washers. Applications: 1966-69 7.0L / 427ci Mark IV Chevrolet big block 1966-70 6.5L / 396ci Mark IV Chevrolet big block...

Product#: T9272

1965-90 Chevrolet Big Block, Pontiac V8, Chrysler V8; Oil Pan Bolt Set; Chrome

When replacing your oil pan, replace your original greasy, worn out bolts with a set of chrome plated bolts to dress up your engine. Set includes (2) 1/4"-20 thread x 1/2" bolts and (20) 5/16"-18 thread x 1/2". bolts

Product#: AR20182

Black Oxide Oil Pan Bolts Hex Head

ARP's premium grade oil pan bolts combine sealing efficiency with good looks. Includes washers.

Product#: T9423

Valve Cover Bolt Set - Chrome 5/16"-18 X 1" (4)

We now offer these original style chrome valve cover bolts for use with early 1st and 2nd generation Firebirds and Trans Am models. Each bolt features 5/16"-18 threads on a 1" shaft. Each set includes 4 bolts.

Product#: MN2414

1960-76 Dodge, Plymouthl; Timing Chain to Camshaft Bolt Set; Single bolt

Reproduction of the bolt and special washer used to attach the camshaft sprocket to the the camshaft on all single bolt models. Long discontinued by Chrysler, this strong, grade 8 unique washer and bolt set fit all years and...

Product#: 85005

Chevrolet Big Block Milodon Plated Oil Pan Hardware Set

Forget about cleaning up your old outdated hardware. This hardware set contains everything you need for a quick and accurate installation of your oil pan. Designed especially for firmly holding oil pans in place without...

Product#: MN2185

Ford/Chrysler; Oil Pan Bolt Set

When swapping out your oil pan, replace your worn original bolts with a set of 20 zinc plated steel 5/16" bolts, featuring integrated serrated lock washers. Fits all engines.