Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 5/32" Emblem Stud, Fits 7/32" Hole, Spring Steel, Black Phosphate Coated
Classic $0.69 ea
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 8 Piece Set - with Rubber Pad
Classic $10.99 set
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Speed Nut for 1/8" Stud - Self Threading - 4 Piece Set; with Rubber Pad
Classic $5.99 set
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut for 3/16" Stud - Self Threading - with Rubber Pad; 4 Piece Set
Classic $6.99 set
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 1/4" Hole, Spring Steel, Black Phosphate Coated
Classic $0.79 ea
Speed nut designed for use with various original and reproduction emblem mounting studs that have a 4mm stud. This speed nut can be applied to virtually any emblem or product that has a 4mm stud and pressed into the hole for...
Thread Cutting Nut 1/8" Stud Size 5/16" Hex
Thread Cutting Nut 1/8" Stud Size 5/16" Hex.
1947-1992; Emblem Installation Barrel Nut; For 3/16 inch Stud; Fits 7/32 inch Hole Diameter; Each
This is the nut needed to allow you to install all emblems for the fenders, header panel and trunk lid, etc. The barrel nut is a push on style versus the original twist on, which will not require removal of body panels for...
1947-1992; Emblem Installation Barrel Nut; For 3/16 inch Stud; Fits 7/32 inch Hole Diameter; Each
Classic $0.89 ea
Thread Cutting Nut, 1/8" Stud Size, 5/16" Hex
Replacement thread cutting pal-nuts used on various vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Used to install 1972 "DODGE" Charger grill emblem. Correct hardware can make any installation job...
Specialty barrel nut designed to install emblems on the body. Can be used for fender emblems, quarter panel emblems, and other body emblems. The barrel nut makes installation of emblems easy. Simply put the barrel nut onto...
1/8" Flanged Acorn Thread Cutting Capped Palnut w/ Mastic Sealer
Stamped steel 1/8" flanged pal nut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct zinc coating, cap/dome...
10-24 Stamped Acorn Palnut; Gold/Yellow Zinc
Stamped steel 10-24 thread palnut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct yellow zinc coating and...
Push-on Flat Nut; Fits 3/16" Stud Size; Measures 3/8" x 5/8"
Universal flat push-on clip used for variuos applications with a 3/16" stud. Clip measures 3/8" x 5/8" and has a black phosphate finish.
8-32 Flanged Stamped Acorn Capped Machine Thread Nut w/o Mastic Sealer
Stamped steel 8-32 flanged machine thread nut used by multiple makes on various models. These self threading domed nuts were originally used to attach emblems, molding, and trim items. It features a period correct zinc...
8-32 Flanged Stamped Acorn Capped Machine Thread Nut w/o Mastic Sealer
Classic $1.99 ea
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
OER®thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a...
1930-2007 GM; Thread Cutting Pal Nut with Sealer; 3/16" Stud Size; Hex Washer Head; Zinc Plated
Classic $1.49 ea
Speed Nut 1/4" Self Thread Cutting - 12 Piece Set
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...
Speed Nut 3/16" Self Thread Cutting - Small Washer - Each
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or part that has a 3/16" stud and pressed into the...
1970 Dodge, Plymouth B Body; Hood Emblem Backing Plate; Each
Reproduction of the original hood emblem backing plate designed for use with 1970 Dodge and Plymouth B-Body models as listed. This is the stamped steel plate that bolts to the hood, and then the hood emblem is attached to it....
Barrel Nut; Fits 1/8" Emblem Stud; Fits 3/16" Hole; Spring Steel; Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut; Fits 1/8" Emblem Stud; Fits 3/16" Hole; Spring Steel; Black Phosphate Coated
Classic $0.69 ea
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Black Phosphate Coated
Replacement barrel nuts used on various GM vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply install each...
Barrel Nut, Fits 1/8" Emblem Stud, Fits 5/32" Hole, Spring Steel, Black Phosphate Coated
Classic $0.69 ea
Thread Cutting Nut, 1/8" Stud Size, 1/4" Hex
Replacement thread cutting pal-nuts used on various GM vehicles. Hex head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
OER®speed nut designed for use with various original and reproduction emblem mounting studs that have a 3/16" stud. This speed nut can be applied to virtually any emblem or product that has a 3/16" stud and pressed into...
Speed Nut for 3/16" Stud - Self Threading - 8 Piece Set; with Rubber Pad
Classic $11.99 set
Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6
Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® thread cutting pal nut with sealer is designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a...
Thread Cutting Pal Nut With Sealer, 1/8" Stud Size, Hex Washer Head, Zinc Plated
Classic $1.79 ea
Emblem Installation Speed Nut Set ; 5/16" ; 8 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 8...
Emblem Installation Speed Nut Set ; 5/16"; 4 Piece Set
Speed nuts for various original or reproduction emblems that include 5/16" mounting studs. This speed nut set can be utilized for many of the emblems and side marker bezels that don't include attaching nuts. Set includes 4...
Round Push On Flat Nut, Fits 5/32" Stud Size, Zinc Plated
Replacement push on round flat nuts used on various vehicles. Zinc plated. Correct hardware can make any installation job easier. Replace your missing or damaged hardware with these quality reproductions. This part is...
1968-74 Chrysler, Dodge, Plymouth; NOS VIN Plate Rosette Rivets; Pair
Refreshing the VIN plate on 1968-1974 Chrysler, Dodge, and Plymouth models can help make any restoration look its best. These reproduction rosette rivets are the correct style fasteners needed to reinstall the dash VIN plate...
1968-74 Chrysler, Dodge, Plymouth; NOS VIN Plate Rosette Rivets; Pair
Classic $39.99 pr
1968-74 Mopar VIN Plate Dry Transfer Logo & NOS Rivets Set
Refreshing your 1968-74 VIN plate has never been easier thanks to a new logo and pair of NOS rivets. The latex ink dry transfer technique used to apply the logo offers a perfect reproduction of the original that was applied...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...
Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated
Classic $0.49 ea
Thread Cutting Pal Nut, 1/8" Stud Size, Hex Washer Head, Zinc Plated
OER® speed nut designed for use with various original and reproduction emblem mounting studs that have a 1/8" stud. This speed nut can be applied to virtually any emblem or product that has a 1/8" stud and pressed into the...
Refreshing your 1968-1974 VIN plate has never been easier thanks to this correct reproduction dry transfer logo. The latex ink dry transfer technique provides an authentic, factory style appearance and closely replicates the...
1968-74 Chrysler, Dodge, Plymouth; VIN Plate Dry Transfer; with Chrysler Corporation Text & Pentastar Logo
Classic $34.99 ea
