Product#: X600750

1955-80 GM; Bolt, Pointed Tip; with Hex Washer Head, 5/16-18 X 1-1/4"; Black Phosphate; Each

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. Note: For a money saving set of 10 use...

Product#: SW90

1968-92 GM, Chrysler; Door Jamb Switch; 2 Terminal

Replacement door jamb switch for use on various 1968-92 GM models. This 2 terminal switch is manufactured to fit and function as original and specifically designed for the models listed below. Replacing this switch will help...

Product#: MD2094

1970-76 Dodge, Plymouth A, B, C, E / 1973-85 Dodge, Plymouth Truck; Turn Signal Switch; 8 Wire Style; w/o Cornering Lamps

Reproduction Chrysler, Dodge, and Plymouth turn signal switch assembly to replace the worn out or non-functioning original Mopar unit. Manufactured to exact specifications, each switch features a correctly constructed...

Product#: MH109

1967-71 Dodge, Plymouth B-Body, 1970-71 E-Body; Sparton Style Horn Assemblies; High & Low Note Horns; Pair

Correct OER® reproduction of the Sparton horns designed for various 1967-71 Mopar models. Each horn is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch. Manufactured to factory...

Product#: 2444442

1966-74 Chrysler, Dodge, Plymouth; Starter Relay

Quality replacement starter relay designed for use on all 1966-74 Chrysler, Dodge and Plymouth models. This starter relay mounts on the inner fenderwell near the battery. Will fit and install on all 1966-74 Chrysler, Dodge,...

Product#: MD2462

1966-73 Chrysler, Dodge, Plymouth; Battery Hold Down Set; Various Models

Repproduction of the original battery mounting hold down set designed for use on various 1966-69 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction....

Product#: MB2534

1969-70 Dodge, Plymouth B-Body; Positive Battery Cable - Big Block; with 1-Piece Molded Starter Lug

Reproduction battery cables for 1969-70 Dodge and Plymouth big block models with 1-piece molded starter lug. Cables feature correct lead length and markings. The positive cable assemblies are manufactured like the original...

Product#: MD2570

1970-74 Dodge, Plymouth; Positive Battery Cable; A/B/E-Body Models; 43-1/2" overall length

Reproduction of the original positive battery cable for use with 1970-74 Dodge and Plymouth models. Each cable is designed and manufactured to replicate the original in appearance and lead length. The positive cable assembly...

Product#: MB2000B

1965-74 AMC, Dodge, Plymouth; Gauge Cluster Voltage Limiter; Various Applications

This replacement voltage limiter is designed to provide a 5-volt supply and circuit protection up to 18-volts. This limiter will work with reproduction gauges, as well as factory gauges, and it's required when using...

Product#: MD2507

1971 Mopar B/E-Body 440 Six-Pack - Engine Wiring Harness - Stock Style Breaker Point Ignition

Replacement complete engine wiring harness which are ready to install and feature correct colored wires and correct style connectors, making installation as easy as possible. Replacement harnesses include connections for the...

Product#: MD2085

1970-82 Chrysler, Dodge, ,Plymouth,; Turn Signal Switch; 11 Wire Style; Car & Truck; with Cornering Lamps

Reproduction Chrysler, Dodge & Plymouth turn signal switch assembly to replace the worn out or non functional original. Manufactured to exact specifications, each switch features injection molded construction with correctly...

Product#: MD2464

1972-74 Dodge; Plymouth; B & E-Body; Battery Hold Down Set

Replacement battery mounting hardware for 1972-74 Dodge and Plymouth models. Replace damaged or missing components with quality replacement parts. Each set will include all necessary hardware to secure the battery to the...

Product#: MD2450A

1970-74 Dodge, Plymouth B / E Body; Battery Tray

Reproduction of the original battery tray designed for use on various 1970-72 Dodge and Plymouth B-Body and 1970-74 E Body models. Manufactured in quality stamped steel to Mopar specifications. Features correct mounting...

Product#: 2444453

1966-69 Dodge, Plymouth A, B, E Body; Starter Relay; with Manual Transmission

Reprpduction of the starter relay for use with all 1966-69 Dodge and plymouth models with a manual transmission. This starter relay will replace the old, or worn out original adding years of reliable service. Mounts on the...

Product#: CA4857

Cloth Wiring Harness Tape; 1" x 100 foot

If you want an OEM quality and appearance for your original or reproduction wiring, this specially manufactured black! This adhesive back tape will allow you to re-wrap your existing harness or replace tape which may have...

Product#: MD9341

1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7 Terminals Plus Ground; with 1-5/8" Rheostat

Reproduction headlamp switch for various 1962-74 Mopar A and B-Body models and other vehicle models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used...

Product#: T70782

Delco Energizer R89 Side Post Battery Topper

Now you can turn any modern style battery into a vintage looking one by adding this battery topper featuring correct special grain just as original. Battery toppers are designed to be used with any maintenance free flat top...

Product#: 10626

Top Post Battery Cable Terminal

Due to the corrosive nature of battery electrolyte, the original lead cast positive and negative terminal ends usually require replacement every few years. We offer these replacement OEM type terminals for use on top post...

Product#: 21025

OER Smart Charger 1250; Smart Battery Charger And Maintainer; 6V/12V; 1.25 Amp

The OER Smart Charger 1250 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 6V or 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell)...

Product#: MD6417

1968-74 Chrysler, Dodge, Plymouth B Body; Neutral Safety Switch Pig Tail; Repair Harness; 3 Prong Connector

Reproduction neutral safety switch harness and socket used to replace the old or damaged harness and connector on various 1968-2002 AMC, Chrysler, Dodge, and Plymouth models. This replacement wiring includes the socket and...

Product#: MB1802

1966; Dodge, Plymouth B-Body; Engine & Forward Light Harness Fusible Link; Each

Reproduction fusible link. Manufactured with the same high quality materials used for our wiring harnesses because these fusible links are included as a part of the harnesses. If your harness needs a new fusible link, these...

Product#: MD9340

1962-81 AMC, Chrysler, Dodge, Plymouth; Headlamp Switch; 7-Terminal; with 1-5/8" Rheostat

Reproduction headlamp switch for various 1962-76 Mopar A and B-Body models. This 7 terminal switch does not have a ground terminal on the bottom of the backside or rear of switch. This switch features a 1-5/8" ceramic...

Product#: 14097278

Starter Bolt 3/8"-16 X 4-11/16"

Replacement starter bolt for models that require a 3/8"-16 x 4-11/16" bolt.

Product#: 2534814

Dodge, Plymouth A, B, E Body; Battery Hold Down J-Bolt; 7"

Reproduction battery hold down J bolt for various Dodge and Plymouth models. Each bolt is a reproduction of the original style battery hold down bolt. This is a 7" bolt. Refer to part number # 2074089 for 8.5" bolt. {fitment}

Product#: A17690

1956-96 AMC, Chrysler, GM, Ford; Wiring Connector; 2-Terminal; Female; Various Applications

Reproduction 2-terminal wiring connector with pigtail to fit a wide variety of AMC and GM applications. This connector is used on relays, AC clutch cycle switches, AC compressor, back-up lamp switches, HVAC components,...

Product#: 2074089

1967-74 Dodge, Plymouth A, B, E; Battery Hold Down J-Bolt; 8.5"

Exact reproduction of the original battery hold down J bolt designed for use with 1967-74 Dodge and Plymouth A, B, and E body models as listed. Measures 8.5". Refer to part number # 2534814 for 7" bolt. {fitment}

Product#: MB2445

1969 Dodge, Plymouth B-Body; Under Dash Wire Harness; with Oil Gauge Provision

Reproduction of the original complete under-dash harness for use with 1969 Dodge and Plymouth B-body models. Each harness features correct color wires, factory style connectors, and is wrapped in non-adhesive black vinyl wrap...

Product#: K0076

Front Fender Wire Harness Straps; 2-1/4" Long; Black Nylon

A hot exhaust manifold can cause serious damage to your electrical system. If not properly fastened, the wiring harness leading to your alternator/generator or other wiring harnesses could fall into an open area between the...

Product#: MH108

1968-74 Dodge, Plymouth; Sparton Style Horn Assemblies; High & Low Note; Various Models - See Applications

Correct OER® reproduction of the Sparton horns designed for various 1968-74 Mopar models. Each horn is designed with the Dodge and Plymouth "folded horn" design for proper sound and correct pitch. Manufactured to factory...

Product#: MD2138

1963-66 Dodge, Plymouth A/B-Body; Turn Signal Switch; without Tilt; 7 Wire Switch

Reproduction turn signal switch for 1963-66 Mopar A and B-Body models without tilt steering wheel. Each turn signal switch replicates the original allowing a complete replacement of the old or non-working original. Includes...

Product#: MB2402

1970 Dodge, Plymouth B-Body; Engine Wiring Harness; with 440 Six-Pack; Stock Style Breaker Point Ignition

Reproduction of the original complete engine wiring harness for use with 1970 Dodge and Plymouth B Body models. This harness is manufactured to the correct factory specifications and is ready to install. Features correct...

Product#: MD2463

1970-76 Dodge; Plymouth; 1970-71 B & E-Body; 1970-76 A-Body; Battery Hold Down Set

Reproduction of the original battery mounting hold down set designed for various 1970-1976 Dodge and Plymouth models. Replace your damaged or missing battery tray hold down components with this quality reproduction. Each...

Product#: 2857241

1967-71 Dodge, Plymouth; Turn Signal Switch; w/o Tilt ; 7 Wire Switch; A, B, E-Body; 1st Design

Reproduction turn signal switch for 1967-71 Mopar A, B & E-Body models without tilt steering wheel. This switch is manufactured to exact factory specifications and comes with metal connectors attached to the ends of the wires...

Product#: MD2569

1970-72 Dodge, Plymouth; B/E-Body; Negative Battery Cable; 23-1/2"; 383ci, 440ci, 400, 440-6P

Reproduction negative battery cable for 1970-72 Dodge and Plymouth models for B & E body models. Cables feature correct lead length and markings. The positive cable assemblies are manufactured like the original and will...

Product#: MB2387

1966-69 Dodge, Plymouth B-Body; Battery Tray; EDP Coated

Reproduction of the original battery tray designed for use on various 1966-1969 Dodge and Plymouth B-Body models. Manufactured in quality stamped steel to Mopar specifications. Features correct mounting points and pre-drilled...

Product#: 2996884

1968-78 Chrysler/Plymouth/Dodge; Horn Switch; With Die Cast Tuff Wheel Horn Button Retainer

OER Reproduction horn switch to fit a wide variety of Chrysler, Plymouth, and Dodge models. Produced in stamped steel and injection molded material just like the original Mopar item. An excellent replacement switch to help...

Product#: MW931

1968-78 Chrysler, Dodge, Plymouth; Horn Switch; with Plastic Tuff Wheel Horn Cap Retainer

Service replacement horn contact assembly that fits a wide variety of Chrysler, Plymouth, and Dodge models. Produced in stamped steel and injection molded ABS just like the original Mopar contact. An excellent reproduction...

Product#: MD2456

1966-74 Dodge, Plymouth; 1966 & 1971-72 B-Body; 1970-74 E Body; Battery Tray Support Brace; Black EDP

Reproduction of the original battery tray brace designed for 1966 & 1971-72 B-Body, and 1970-74 E-Body Dodge and Plymouth models as listed below. Each bracket is manufactured in stamped steel to original specifications and...

Product#: MD9337

1962-81 Mopar, AMC; Headlamp Switch; 7 Terminals Plus Ground; With 1-1/4" Rheostat

Reproduction headlamp switch for various 1962-81 Mopar A and B-Body models and other models as listed. This switch features 7 terminals, plus 1 ground terminal on the bottom rear portion of the switch that can be used on...

Product#: MD4520

1967-68 Dodge, Plymouth; B Body; Back-Up Lamp Wiring Harness

Reproduction of the original back-up lamp harness designed for use on 1967-68 Mopar B-body and 1968 A body models. This back-up lamp harness connects the bulkhead to the transmission backup switch. Other connections may vary...

Product#: 21026

OER Smart Charger 800; Battery Charger And Maintainer; 12V; 0.8 Amp

The OER Smart Charger 800 battery charger and maintainer for classic cars and trucks provides high frequency automatic intelligent charging for 12V lead-acid, flooded, or sealed maintenance-free (AGM and Gell Cell) batteries....

Product#: 2095608

1962-65 Dodge, Plymouth; Starter Relay; with Automatic Transmission

Replacement of the original starter relay for use with 1962-65 Dodge or Plymouth models with automatic transmissions. This relay mounts on the inner fender well near the battery. {fitment}

Product#: 2095609

1961-65 Dodge, Plymouth; A, B-Body Starter Relay; Manual Transmission

Replacement starter relay for various 1961-65 Dodge and Plymouth A, B-Body models with manual transmission. Replaces old, worn out, or missing original starter relays on the models listed. Designed to mount on the inner...

Product#: 3733289

3/8"-16 X 3-5/8" Starter Mount Bolt

This replacement shouldered medium length bolt commonly used to secure starters with a cast iron staggered pattern nose to a big block engine. Two bolts required per vehicle.

Product#: DS121

Headlamp Switch; 3 Position; Universal Fit

Universal fit headlamp switch for a wide variety of vehicle applications from the 1940's and beyond. Each switch features 3 position push/pull functionality with knob and shaft. Required a 3/8 diameter hole for mounting, and...

Product#: MD9343

1975-99 Chrysler, Dodge, Plymouth; Headlight Switch; 9-Terminal; with Ceramic Style Rheostat

Reproduction headlamp switch for various 1975-99 Mopar models. This 9 terminal switch is produced with an older style ceramic rheostat with metal spring contact (rather than the newer printed circuit board style rheostat) for...

Product#: 10102

Painless 21-Circuit Universal Chassis Harness without Column Ignition Switch Connector

This 21-circuit kit is our most widely used customizable chassis harness. You'll find that it's easily adaptable to almost any vehicle. This universal harness will work on carbureted or any stand alone fuel injected engine...

Product#: 30001

Painless 14 Circuit Universal ATO Fuse Block Assembly

Use this 14 Circuit OEM Universal style pre-wired fuse block as a starting point for custom wiring. All you have to do is terminate each circuit wire and attach it to the fuse block. Pre-wired and labeled for the following...

Product#: 40105

Remote Mount Battery Cable Set 16 Feet Red & Black #1 Gauge Cables

Perfect for trunk mounted batteries. Both positive and negative cables are 1 gauge and 16 feet in length which allows for them to be attached to the engine for maximum starting current. Helps prevent voltage drop to the...

Product#: VP28146R

1980-15 4-Terminal Make & Break Miscellaneous Relay

Reproducion 4 terminal make and break relay used for various functions such as lighting, horns on a multitude of vehicles from 1980-2015. This 4 terminal relay is also popular in the aftermarket for lights, light bars, vacuum...

Product#: HP210120

Heatshield Products; Fire Shield Sleeve Silicone Coated Line, Hose & Wire Loom; 1.5" ID; 50" Roll; Red

This rugged silicone fire heat shield sleeve makes it resistant to chemicals, abrasion, and fraying. You can also use HP Fire Armor for brake lines, fuel lines, wiring harnesses, and cables. In addition you can the rugged...

Product#: HP210150

Heatshield Products; Fire Shield Sleeve Silicone Coated Line, Hose & Wire Loom; 1.5" ID; 50" Roll; Black

This rugged silicone fire heat shield sleeve makes it resistant to chemicals, abrasion, and fraying. You can also use HP Fire Armor for brake lines, fuel lines, wiring harnesses, and cables. In addition you can the rugged...

Product#: MB2437

1966; Dodge B-Body; Under-Dash Wire Harness

Replacement under-dash harness for 1966 Dodge B-body models except Charger. Our harnesses feature correct color wires, factory style connectors and is wrapped in non-adhesive vinyl wrap tape. Under-dash harnesses connect to...

Product#: MB2448

1971 Mopar B-Body Under-Dash Wire Harness - Without Gauges

Replacement under-dash harness for 1971 B-body models. Our harnesses feature correct color wires, factory style connectors and is wrapped in non-adhesive vinyl wrap tape. Under-dash harnesses connect to various switches and...

Product#: HP210142

Heatshield Products; Fire Shield Sleeve Silicone Coated Line, Hose & Wire Loom; 1/2" ID; 100" Roll; Black

This rugged silicone fire heat shield sleeve makes it resistant to chemicals, abrasion, and fraying. You can also use HP Fire Armor for brake lines, fuel lines, wiring harnesses, and cables. In addition you can the rugged...

Product#: MB2442

1968 Dodge, Plymouth B-Body; Complete Under-Dash Wire Harness; with Oil Light

Replacement under-dash harness for 1968 Dodge and Plymouth B-body models with oil light. Harnesses feature correct color wires and factory style connectors. Each harness is wrapped in non-adhesive vinyl wrap tape. Under-dash...

Product#: MB2449

1971 Charger, Coronet, GTX, Road Runner, Satellite; Under Dash Wiring Harness; with Gauges

Reproduction of the original under dash wiring harness for us with 1971 Dodge and Plymouth B-body models as listed. Each harness features the correct color wiring, factory style connectors, and cosmetically correct terminal...

Product#: MB2446

1970 Dodge, Plymouth B-Body; Under Dash Wire Harness; with Oil Light

Reproduction of the original complete under-dash harness for use with 1970 Dodge and Plymouth B-body models. Each harness features correct color wires, factory style connectors, and is wrapped in non-adhesive black vinyl wrap...

Product#: 60524

2008+ Gen IV LS3 EFI Harness; Throttle By Wire

This harness is standalone and is not intended to replace the OEM engine wiring. Standalone harnesses are intended to run the designated engine & transmission only, generally when swapped into another vehicle. This harness is...

Product#: MD4235

access 24 Circuit & Up To 7 Relay Wiring Kit - Mopar

This newly engineered fuse system from Ron Francis Wiring, known as the ACCESS 24/7 [patent pending] comes standard with 24 fuses and 3 relays, along with a unique mounting system and room for 4 additional relays. The ACCESS...