Product#: PV29204BL

Residual Pressure Valve; Blue; 2 psi

Residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is...

Product#: MN1521

1973-74 Dodge, Plymouth B, E-Body; Disc Brake Backing Plates; Pair; Also used with 1962-74 Brake Conversions

Reproduction of the original disc brake backing plates originally installed by the Chrysler factory on various 1973-74 Dodge and Plymouth B and E body models. They are sometimes referred to as dust shields or splash shields....

Product#: PV29204RD

Residual Pressure Valve; Red; 10 psi

Residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is...

Product#: 1745000

Hurst; Roll Control; With Stainless Valve

Reduce the chance of rolling the lights and produce more effective "burn outs" with the original Hurst Roll/Control! Used primarily in drag racing to provide positive locking action to the front wheels of race cars. In tests,...

Product#: MN1520

1970-72 Dodge, Plymouth B & E-Body; Disc Brake Backing Plates; Pair

Reproduction of the original style "disc brake" backing plates designed for use with1970-72 Dodge and Plymouth B boty, and E Body models as listed. Each plate is manufactured in stamped steel replicating the original design...

Product#: 5671510

Hurst; Roll/Control, Line/Loc Installation Kit; For SAE

The Roll/Control Installation Kit is designed to be used in conjunction with most brake holding devices on American made vehicles. This kit contains brake lines and various brass fittings, connectors, adapters, unions and...

Product#: MD1608

1964-71 Mopar A/B/E-Body Power Brake Booster Dust Boot Retainer

Replacement brake booster boot retainer for various 1964-66 A-Body, 1966-71 B-Body and 1970-71 E-Body models equipped with power brakes. Applications: 1964-66 A-Body all 1966-71 B-Body all Hemi cars without Bendix boo ster...

Product#: MD1602

1964-74 Mopar A/B/E-Body Brake Master Cylinder Dust Boot

Replacement master cylinder dust boot for various 1964-72 A-Body, 1964-74 B-Body and 1970-74 E-Body Mopar models. This boot is for manual brake vehicles and is used to protect the plunger. {specs} {fitment}

Product#: 26013783

2 PSI Residual pressure Valve - Blue

Wilwood pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. The two pound valve is used in disc brake applications where the master cylinder is...

Product#: 23011861

Wilwood Brake Caliper Bolt Kit - 3/8-24 Thread

Made out of aluminum, 2.44" ID. Used on Wilwood hats or rotors with center register diameters less than 3.06"

Product#: 30012761

Wilwood Hat/Rotor Register Ring Adapter - 2.44" Diameter

The Rotor and Hat Register Adapters are used to locate one-piece iron rotors and aluminum hat assemblies to vehicle specific hub or axle registers. Available in size ranges from 2.00? to 2.88? internal diameter. Requires...

Product#: 26013784

10 PSI Residual Pressure Valve - Red

Wilwood ten pound residual pressure valves retain a minimum brake line pressure to help eliminate excessive pedal travel in both disc and drum brake systems. With drum brakes, a ten pound valve is used to compensate for...

Product#: LABORPC

Black Powder Coat

Product#: LABORPCT

Powder Coat Black 3RD Member

Product#: A5700239

OTB Gear Triple Remote Fluid Reservoir - Smooth with Polished Finish

This attractively designed fluid reservoir blends well with traditional or contemporary engine compartments. Fluid lines can be run out of the back or bottom of reservoirs 1/8" NPT (plugs included for unused holes). Made in...

Product#: MN5006

1963-74 Dodge, Plymouth B/E-Body; Disc Brake Spindle And Caliper Bracket Set

Disc brake conversion set for those who want to use the brake calipers, rotors and hardware from a 1976-80 Aspen or Volare. Each set includes Spindles, Caliper Brackets, Backing Plates. Brake calipers, rotors, and hardware to...

Product#: MN431008

1967-70 Mopar A/B/E-bodies with Front Disc Brakes - Brake Proportioning Valve Clamp

Reproduction mounting clamp used to secure the proportioning valve to the left frame rail on all 1967-70 A, B, and E-Body front disc brake equipped cars. Formed from the correct gauge steel and clear zinc plated for original...

Product#: 2208E

Russell; Speed Bleeder Brake Bleeder Screws; 3/8"-24 Thread; 1" Long

Now you can bleed your hydraulic braking system quickly and easily by yourself! "Speed Bleeders" simply replace your original bleeder screws at each wheel cylinder (drum brakes) or caliper (disc brakes). The patented,...

Product#: 2208G

Russell; Speed Bleeder Brake Bleeder Screws; 3/8"-24 Thread; 1.5" Long

Now you can bleed your hydraulic braking system quickly and easily by yourself! "Speed Bleeders" simply replace your original bleeder screws at each wheel cylinder (drum brakes) or caliper (disc brakes). The patented,...

Product#: A5700240

OTB Gear Triple Remote Fluid Reservoir - Smooth with Satin Finish

This attractively designed fluid reservoir blends well with traditional or contemporary engine compartments. Fluid lines can be run out of the back or bottom of reservoirs 1/8" NPT (plugs included for unused holes). Made in...