Product#: MD2234

1960-76 Dodge, Plymouth A, B & E-Body; Heater Hose Tie Strap; Each

Reproduction heater hose tie strap for all 1960-76 Dodge and Plymouth A, B, and E-Body models. Manufactured from correct gauge aluminum for an original appearance. This strap has various purposes. Most commonly it was used to...

Product#: K556

Heater Hose Bracket Set; Various GM Applications

This hose bracket set is designed to secure a pair of heater hoses to the inner fender skirt and the alternator bracket to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. These heater...

Product#: R045010

Sanden SD-7B10 / 7176 Peanut Style Compressor Discharge Adapter Fitting; Straight w/ #8 and #10 O-Ring; Polished

Vintage Air O-ring adapter fitting for Sanden SD-7 "Peanut" style compact AC compressors. This aluminum adapter will bolt directly to the suction inlet flange, converting it to #8 and #10 male O-ring thread. Sold...

Product#: MD2228

1969-70 Dodge, Plymouth B-Body; Big Block; Inner Fender Heater Hose Bracket; RH Passenger Side

Reproduction heater hose bracket for 1969 Dodge and Plymouth A-body models, and 1969-70 B-body big block models. Each bracket is manufactured from the correct gauge steel and finished in cadmium plating to match original...

Product#: *MP600175B

1965-69 Chrysler/Dodge/Plymouth Big Block/Hemi; Heater Hose Fitting Kit; OE Style; 5/8" id; Black

Original style heater hose fittings for 1965-69 Mopar models. Patterned after original fittings and plated in black to prevent corrosion. One kit required per vehicle. Set includes: 5/8" hose ID, 1-15/16" length with 3/8"...

Product#: 521111

1966-70 Charger, Road Runner, GTX; Vintage Air SureFit Reduced Barrier Hose Kit; Standard

Reduced barrier hoses have the same ID as standard barrier A/C hoses. However, the wall thickness of a reduced barrier hose is thinner which creates a smaller OD hose. This allows for a cleaner look that takes less space and...

Product#: AU5357

Corbin Heater Hose Clamp for 3/4" O.D. Hose; Each

OEM-Style Corbin 3/4" heater hose clamp designed for use with various makes and models. Most commonly used for 5/8" heater hose. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...

Product#: S7314

44" Chrome Stainless Steel Flexible Heater Hose Set; With Chrome Ends

Ideal replacements for worn or rotted heater hoses. Non-corrosive stainless steel construction conforms to tight bends and holds shape indefinitely. Rated for high temperatures and high pressure, this is the ultimate heater...

Product#: MB2349

1971 Mopar B-Body With AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...

Product#: S7313

44" Chrome Stainless Steel Flexible Heater Hose Set; With Polished Ends

Ideal replacements for worn or rotted heater hoses. Non-corrosive stainless steel construction conforms to tight bends and holds shape indefinitely. Rated for high temperatures and high pressure, this is the ultimate heater...

Product#: K0150

1965-2010 GM, Dodge, Plymouth; Water Nipple, Heater Hose Fittings; Pair

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. 1/2" NPT - 5/8" i.d. x 1-1/2" L & 3/4" i.d. x...

Product#: MD2254

1969 Mopar A & B-Body Without AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 1605534 / 1527532 Mopar Aut hentic...

Product#: MD2245

1968 Mopar A & B-Body With A/C Heater Hose Set

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...

Product#: MB2348

1970 Mopar B-Body With AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...

Product#: MD2243

1966 Mopar A & B-Body With AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...

Product#: MB2350

1970 Mopar B-Body Without AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 1605534 / 3441092 Mopar Aut hentic...

Product#: MD2253

1968 Mopar A & B-Body Without AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 1300523 / 2435961 Mopar Au thentic...

Product#: MD2252

1967 Mopar A & B-Body Without AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 1300523 / 2585961 Mopar Aut hentic...

Product#: MB2351

1971 Mopar B-Body Without AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 1887046 / 2936402 Mopar Aut hentic...

Product#: R045024

GM R4 Compressor Rear Adapter Block - #8 / #10

Vintage Air rear block-face adapter block for GM R4 vertical air conditioning compressors. This aluminum adapter will bolt directly to the rear flange, converting it to -8AN and -10AN male thread. Sold individually.

Product#: MD2227

1970-76 Mopar Small Block Cylinder Head Heater Hose Bracket

Reproduction heater hose bracket for all 1970-76 small block vehicles. This piece bolts to the right hand (passenger side) cylinder head. Manufactured from 16 gauge galvanized steel and is thermo-plastic coated. Made in USA

Product#: MD2232

1960-68 Mopar Big Block & Hemi Without AC Alternator Heater Hose Bracket

Reproduction heater hose bracket for all 1960-68 big block and Hemi models. This bracket bolts to the alternator triangle support bracket. Manufactured from correct gauge steel, cadmium plated and thermo-plastic coated. Made...

Product#: MP600177

1964-69 Mopar with Small Block Engine - Original Style Heater Hose Fittings Kit (5/8" id & 3/4" id)

Original style heater hose fittings for 1964-69 Mopar models. Patterned after original fittings and zinc plated to prevent corrosion. One kit required per vehicle. Set includes: (2) 3/4" hose ID, 1-1/2" length with 1/2" pipe...

Product#: 358282

Vintage Air; Beadlock Male T-Fitting #10 Hose

Beadlock Male T-Fitting NO 10 Hose. Fittings For Dual Air Standard Vintage Air Hose

Product#: AU5354

9/16" Corbin Hose Clamps

OEM-Style Corbin 9/16" hose clamp. Manufactured for the most discriminating restorer in mind. Most commonly used for fuel and vacuum hose. Correct hardware can make any installation job easier. Replace your missing or damaged...

Product#: MD2233

1967-68 Mopar Big Block With AC Alternator Heater Hose Bracket

Reproduction heater hose bracket for all 1967-68 big block models. This bracket bolts to the alternator on top of the adjusting strap. Manufactured from correct gauge steel, zinc plated and thermo-plastic coated. Made in USA

Product#: MD2230

1967-68 Mopar Big Block With AC Valve Cover Heater Hose Bracket

Reproduction heater hose brackets for all 1967-68 Mopar big block models with AC. This bracket clips onto the right hand (passenger side) valve cover. Manufactured from correct 18 gauge stainless steel. Made in USA

Product#: 358280

Vintage Air; Beadlock Male T-Fitting; #6 Hose

T-fitting for dual air standard vintage air hose.

Product#: 35812

Beadlock O-Ring Fitting

For use with #8 Vintage Air standard air conditioning hose only.

Product#: A17086

13/16" Corbin Style Hose Clamp for 13/16" O.D. Hose

Used on 13/16" O.D. hose.

Product#: 521112

1966-70 Charger, Road Runner, GTX; Vintage Air SureFit Reduced Barrier Hose Kit; Modified

Reduced barrier hoses have the same ID as standard barrier A/C hoses. However, the wall thickness of a reduced barrier hose is thinner which creates a smaller OD hose. This allows for a cleaner look that takes less space and...

Product#: 547000

Vintage Air Extended Length Hose Kit - With Drier for 134A and R-12-14 Assorted O-Ring Fittings

All Vintage Air hose kits use barrier type refrigerant hose for use with HFC-134a and R-12 refrigerants. Includes adequate hose length to connect most universal systems drier and mounting clamps 14 assorted O-ring fittings...

Product#: 547001

Vintage Air; Beadlock 14-Fitting Extended Length Refrigerant Hose Kit without Drier for 134a Beadlock; 547001

All Vintage Air hose kits use barrier type refrigerant hose for use with HFC-134a and R-12 refrigerants. Includes adequate hose length to connect most universal systems 14 assorted O-ring fittings and refrigerant oil....

Product#: 342311

Compressor Block Fitting; Vintage Air TiteFit Manifold; For Sanden SD7 Compressor; -8 An; Polished Finish

This TiteFit compressor block fitting, or manifold designed for Vintage Air Front Runner? drive systems with Sanden SD7 style compressor, features a polished finish.

Product#: MD2246

1969 Mopar A & B-Body With AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...

Product#: MD2244

1967 Mopar A & B-Body With AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved & marked hoses cut in 4 ft. lengths with spring clamps and two aluminum tie straps. A/C equipped cars have extra length or curved bypass hose with correct...

Product#: MD2251

1966 Mopar A & B-Body Without AC Heater Hose Set

This reproduction heater hose set includes two correctly grooved and marked hoses cut in 4 ft. lengths, spring clamps and two aluminum tie straps. Numbers stamped on hoses: 2277751 / 1527532 Mopar Aut hentic...

Product#: 342310

Compressor Block Fitting; Vintage Air TiteFit Manifold; For Sanden SD7 Compressor; -8 An; Standard Finish

This TiteFit compressor block fitting, or manifold designed for Vintage Air Front Runner? drive systems with Sanden SD7 style compressor, features a standard finish.

Product#: YE5210

5/8" Heater Hose; 5 Foot Length

Quality replacement heater hose in one of the most common sizes used in many AMC, GM, Ford, Chrysler, and other vehicles. This hose can be used for nearly all applications. Includes 5 feet of 5/8" hose for most applications....

Product#: YE5215

3/4" Heater Hose; 5 Foot Length

Quality replacement style heater hose in one of the most common sizes used in many AMC, GM, Ford, Chrysler and other models. This hose can be used for nearly all applications. Includes 5 feet of 3/4" hose for most...

Product#: AE156212

Alter Ego 1562 Series; Insulated Billet Aluminum Line Clamp; Separting; 1/2" to 1-1/8" OD; 2-Hole

Alter Ego 1562 Series insulated billet aluminum line clamp/separator with Delrin inserts. These clamps are great for cleaning up your engine bay. Safe for use with most hard and soft fluid and air lines. Perfect for custom...

Product#: MD2226

1969-74 Mopar A, B & E-Body Alternator Heater Hose Bracket

Reproduction heater hose bracket for all 1969-74 big block and Hemi models. This bracket bolts to the alternator triangle support bracket. Manufactured from correct gauge steel, cadmium plated and thermo-plastic coated. Made...

Product#: K0151

1965-72 GM, Dodge, Plymouth; Slotted Nipple, Heater Hose Fitting; Various Models

Reproduction of the original style slotted nipple heater hose fitting designed for use with various models as listed. This replacement fitting can be threaded into the water pump or intake manifold to provide heater hose or...

Product#: K0149A

1960-2010; Water Pump, Heater Hose Nipple Set; 5/8" hose, 3/4" hose; 2 Piece Set;

These replacement fittings can be threaded into the water pump or intake manifold to provide heater hose or bypass hose attachment points. Avaliable in several different sizes. Includes: 5/8" hose ID, 1-1/2" length with 1/2"...

Product#: MP600175

1965-69 Chrysler/Dodge/Plymouth Big Block/Hemi; Heater Hose Fitting Kit; OE Style; 5/8" id; Plated

Original style heater hose fittings for 1965-69 Mopar models. Patterned after original fittings and zinc plated to prevent corrosion. One kit required per vehicle. Set includes: 5/8" hose ID, 1-15/16" length with 3/8" pipe...

Product#: MP600176

1970-76 Mopar with BB or Hemi - Original Style Heater Hose Fittings Kit (1/2" i.d. & 5/8" i.d.)

Original style heater hose fittings for 1970-76 Mopar models. Patterned after original fittings and zinc plated to prevent corrosion. One kit required per vehicle. Set includes: 1/2" hose ID, 1-15/16" length with 1/4" pipe...

Product#: MP600178

1970-76 Mopar with Small Block Engine - Original Style Heater Hose Fittings Kit (1/2" id & 1" id")

Original style heater hose fittings for 1970-76 Mopar models. Patterned after original fittings and zinc plated to prevent corrosion. One kit required per vehicle. Set includes: 1/2" hose ID, 1-15/16" length with 1/4" pipe...

Product#: MD2229

1963-68 Mopar A & B-Body Hemi Inner Fender Heater Hose Bracket

Reproduction heater hose bracket for 1963-66 A-body and 1966-68 Hemi B-body models. This bracket bolts to right inner (passenger side) fender panel above the shock tower. Manufactured from correct 18 gauge stainless steel....

Product#: MD2235

1969-74 Mopar Big Block With AC Alternator Heater Hose Bracket

Reproduction heater hose bracket for all 1969-74 big block models with AC. This bracket bolts to the alternator triangle support bracket. Manufactured from correct gauge steel and thermo-plastic coated. Made in USA

Product#: AU5356

3/8" Corbin Style Hose Clamp

OEM-Style Corbin 3/8" hose clamp. Manufactured for the most discriminating restorer in mind. Fits 3/8" id hose. Most commonly used for fuel and vacuum hose. Correct hardware can make any installation job easier. Replace your...

Product#: 38622

1960-75 Expansion Valve

Replacement of the thermostatic expansion valve. Required on all models originally equipped with factory AC. This valve regulates the supply of refrigerant to the evaporator. This product is a replacement part and may differ...

Product#: MD2231

1967-68 Mopar Big Block Without AC Valve Cover Heater Hose Bracket

Reproduction heater hose brackets for all 1967-68 Mopar big block models without AC. This bracket clips onto the right hand (passenger side) valve cover. Manufactured from correct 18 gauge stainless steel. Made in USA

Product#: MP600180

1965-69 Chrysler/Dodge/Plymouth; Big Block/Hemi; Heater Hose Fitting; 5/8" id; 2" Length; Black

Reprooduction heater hose fitting for 1965-69 Mopar models. Patterned after original fitting and plated in black to prevent corrosion. This is the 2-inch long fitting, whicxh is the shorter of the two fittings that are...

Product#: A5358

15/16" Corbin Style Hose Clamp for 15/16" O.D. Hose

Product#: 0858

1966-82 GM; Heater Hose Clamp; Tower Style; For 3/4" Hose; 1-3/16" Diameter

Reproduction 1-5/16" diameter tower style hose clamp for various models. Each clamp is designed to replace the original and offers an OE appearance. Correct for most 1969-1982 GM vehicles for 3/4" heater hose and 1966-1982...

Product#: 3770259

Heater Hose Clip for Inner Fender Skirt; Various GM Applications

This hose clip is designed to secure a pair of heater hoses to the inner fender skirt to prevent damage of the hoses and keep the engine compartment neat and tidy in appearance. This heater hose clip was original equipment on...

Product#: *R085678

1959-72 Radiator And Heater Hose Tower Clamp Set; Includes 5/8", 3/4", 2-1/16", 2-1/4" Tower Clamps; 8-Piece Set

Reproduction of the original 1959-1972 tower style hose clamps. Includes all eight clamps needed to completely replace radiator and heater hose clamps. This style tower clamp was originally used from 1959-1972, however they...

Product#: MD2220

1971-74 Mopar A, B & E-Body With Big Block Or Hemi Hose Clamp Set

Replacement hose clamp sets for all 1971-74 big block and Hemi models. These are correct spring clamps. Set includes: Four radiator clamps Ten heater hose clamps Applications: A-Bod y 1971-74 Valiant with big block or Hemi...

Product#: 0857

Heater Hose Clamp; Tower Style; For 5/8" Hose; 1-1/16" Diameter

Reproduction 1-1/16" diameter tower style hose clamp for various applications on 1966-1982 GM models. Each clamp is designed to replace the original and offers an OE appearance. Correct for most 1969-1982 GM vehicles for 5/8"...

Product#: MD2219

1970 Dodge, Plymouth A, B, E-Body Hose Clamp Set; with Big Block or Hemi; 10 piece set

Reproduction style hose clamp sets designed for use with all 1970 Dodge and Plymouth A, B, E body big block and Hemi models. This gold/copper colored spring clamp set includes four radiator clamps and six heater hose clamps....