Product#: T4936

Valve Cover T-Bar Wing Nut and Stud Set; Chrome; 1/4"-20 Thread; 5" Tall; Set of 4

Whether you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal or installation faster and easier. Each wing nut is chrome plated for a custom look. 5" tall with 1/4"-20...

Product#: MN9200

1966-70 Mopar 426 Hemi Valve Cover Stud And Nut Set

Complete set of 20 studs and nuts to fit 1966-70 426 Hemi heads to retain the use of factory valve covers. These have the correct finish and KEPS nuts. For use with all stamped sheet metal valve covers. Nuts also available...

Product#: 66038

Chrome Valve Cover Mini Nut Set; 4 Pieces; 1/4"-20 Studs; 1-3/8" Tall

These mini nuts hold your valve covers firmly in place ensuring a good gasket seal with no oil leaks.

Product#: 66036

Chrome Deluxe Valve Cover Wing Nut Set; 4 Pieces; 5/16"-18 Studs; 4" Tall

Whether you use extra tall or stock height valve covers, these deluxe wing nuts are designed to clear them and make removal or installation faster and easier. Each wing nut is chrome plated for a custom look.

Product#: MN1000

Mopar Steel Valve Cover Bolts

Mopar Performance valve cover chrome plated bolt/washer 5/8" length Note:Designed for use with OE stamped steel valve covers only.

Product#: 41381

Chrome Valve Cover Wing Nuts; 5/16"-18 Threads" 3-1/2" Tall

Whether you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal or installation faster and easier. These wing nuts are considered tall as compared to standard wing nuts....

Product#: 66003

Stamped Valve Cover Tab Washers Set of 8

If you're looking for a nice set of valve cover hold-downs, look no further. Proform offers these chrome coaated steel valve cover hold-downs that definitely add a nice touch to your engine compartment. They are sold as a set...

Product#: 66006

Chrome Deluxe Valve Cover Wing Nut Set; 4 Pieces; 1/4"-20 Studs; 4" Tall

Whether you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal or installation faster and easier. Each wing nut is chrome plated for a custom look.

Product#: 66650

Valve Cover Nut and Stud Set; Chrome; 1" Tall; With Stainless Steel Washers; Set of 4

These chrome plated mini nuts hold your valve covers firmly in place ensuring a good gasket seal. Each set includes: (4) chrome plated mini nuts, no logo, (4) 1/4-20 thread mounting studs and (4) stainless steel washers. Sold...

Product#: D440902

Mopar Logo Valve Cover Wing Nuts; Chrome w/ Blue Emblem

MOPAR logo valve cover wing nuts for various 1958-91 Chrysler engines. Applications include Charger, Barracuda, Roadrunner, and Challenger equipped with LA, B, and RB V8 motors. These cast steel wing nuts come in chrome...

Product#: D440756

Mopar Logo Valve Cover Wing Nuts; Black Crinkle w/ Blue Emblem

MOPAR logo valve cover wing nuts for various 1958-91 Chrysler engines. Applications include Charger, Barracuda, Roadrunner, and Challenger equipped with LA, B, and RB V8 motors. These cast steel wing nuts come in black...

Product#: PF440885

1958-91 MOPAR VALVE COVER WING NUTS; SHARK GRAY W/ BLACK MOPAR EMBLEM

Premium Shark Gray Wing Nuts. Mopar "M" Emblem is cut sharply into the top of each wing nut then inlaid with black, CED painted for long-term corrosion resistance, and then Shark Gray painted on the outer surface. The lower...

Product#: 41371

Chrome Valve Cover Wing Nut Set; 1/4"- 20 Threads; 3-1/2" Tall

Whether you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal or installation faster and easier. These wing nuts are considered tall as compared to standard wing nuts....

Product#: MN1109

Mopar Steel Valve Cover Rubber Plug

Product#: T4938

Valve Cover T-Bar Wing Nut and Stud Set; Chrome; 1/4"-20 Thread; 4" Tall; Set of 4

Whether you use extra tall or stock height valve covers, these wing nuts are designed to clear them and make removal or installation faster and easier. Each wing nut is chrome plated for a custom look. 4" tall with 1/4"-20...

Product#: MD2413

1965-73 Chrysler/Mopar 4-Barrel Small Block Valve Cover Wire Loom Shield

Excellent reproduction of the 1965-73 right valve cover wire loom heat shield used on 4-barrel small block applications. Found on 273 Hi-Po and 340 valve covers, including AAR and T/A. Formed from correct gauge steel and...

Product#: 3894337

1958-1981 GM, Chrysler; Valve Cover Grommet; Rubber; Each; Various Models

Valve cover grommet designed for use with various 1947-1981 makes and models as listed. This utility plug is manufactured in quality EPDM rubber and used on valve covers with 1.25 diameter holes. Will plug up the opening hole...

Product#: T4993

Chrome Valve Cover Spreader Bar Set; Small Block Chevrolet; 4 Pieces

By spreading the load over a wider area, these hold-down clamps minimize distortion of the valve cover flanges, thereby decreasing the possibility of oil leakage.

Product#: MN2072

1964-76 Mopar 273-360 Small Block Mr Gasket Ultra-Seal Valve Cover Gaskets

Mr. Gasket Ultra-Seal valve cover gaskets are manufactured from high-density cork/rubber blend gasket material that has a black latex rubber coating applied to the outside of the gasket to help seal minor flange...

Product#: A5706412

1941-62 Chevrolet 235, 261 Stovebolt Inline-6; OTB Gear Stud Kit for Cast Aluminum Finned Valve Covers

OTB Gear 216 style stud kit for mounting OTB 216 Chevy 6 valve cover to later model 235 or 261 engines. These studs are machined from hardened steel with smooth rolled threads and properly chamfered ends. They are 3/8"-16,...

Product#: MN2073

1963-76 Mopar 361-440 (Except Hemi) Big Block Performance Valve Cover Gaskets

Mr. Gasket performance valve cover gaskets are manufactured from high-density cork/rubber blend gasket material that is 3/16" thick and provides excellent sealing and durability. New gaskets are a must when removing or...

Product#: MN2066

1964-76 Mopar 273-360 Small Block Performance Valve Cover Gaskets

Mr. Gasket Performance valve cover gaskets are manufactured from high-density cork/rubber blend gasket material that is 3/16" thick and provides excellent sealing and durability. New gaskets are a must when removing or...

Product#: MN2036

1964-91 Mopar Small Block Performance Valve Cover Gaskets

Mopar Performance valve cover gaskets. New gaskets are a must when removing or replacing your valve covers.

Product#: T9423

Valve Cover Bolt Set - Chrome 5/16"-18 X 1" (4)

We now offer these original style chrome valve cover bolts for use with early 1st and 2nd generation Firebirds and Trans Am models. Each bolt features 5/16"-18 threads on a 1" shaft. Each set includes 4 bolts.

Product#: MN1992

1965-76 Mopar Performance Valve Stem Seal Set

Made of high-temp viton material, these valve seals feature a full or semi-umbrella shape for dual-purpose. Helps prevent oil seepage down valve guides. Not recommended for dual valve springs. Sold in sets of 16. Applicat...

Product#: 7281

1/4"-20 x 5"; Valve Cover Wing Bolt; Chrome Plated

Value-priced chrome plated wing nut bolts give your engine valve covers a new look. 1-1/4" long threadeds.

Product#: MN2142

Moroso Breather Grommets with Intregated Baffle For Fabricated Valve Covers.095"

These breather grommets are for Moroso fabricated aluminum valve covers features an integral baffle. Provides a superior seal to allow the engine to pull greater vacuum.

Product#: MN2140

Moroso Pcv Grommet For Fabricated Valve Covers.095"

This PCV grommet for Moroso fabricated aluminum valve covers. Provides a superior seal to allow the engine to pull greater vacuum.

Product#: MN2141

Moroso Pcv Grommet & Baffle For Fabricated Valve Covers.095"

This PCV grommet for Moroso fabricated aluminum valve covers features an integral baffle. Provides a superior seal to allow the engine to pull greater vacuum.