Product#: MF290

1962-76 Dodge, Plymouth; Fuel Sending Unit Ground Strap; 3-3/4" Steel

Reproduction of the original fuel tank sending unit ground strap designed for use with most 1962-76 Dodge and Plymouth A-body, B-body and E-body models. Attaches near the short fuel hose that joins the fuel tank sender line...

Product#: MF441

1970-74 Dodge, Plymouth E-Body; Standard Fuel Tank Sending Unit; 5/16" Outlet

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...

Product#: MF294

1962-76 Dodge, Plymouth A, B, E Body; Fuel Sending Unit Rubber Seal; 2-1/4" ID

Reproduction of the original rubber fuel sending unit seal designed for use with 1962-76 Dodge and Plymouth A, B, and E Body models. Replaces original Mopar part number # 1948757. We suggest replacing this seal every few...

Product#: CX5042

1965-97 GM; Fuel Tank Sending Unit; 0-90 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube

Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...

Product#: 479312

1947-76 GM, Chrysler, Dodge, Plymouth; Brass Fuel Tank Sending Unit Float

Reproduction brass fuel sending unit float for various 1947-76 General Motors, and Chrysler, Dodge, Plymouth models. If your fuel gauge isn't reading correctly, it may be the fuel sending unit float. The original OE float may...

Product#: MF442

1970-74 Dodge, Plymouth E-Body; Standard Fuel Tank Sending Unit; with 3/8" Outlet ; 1/4" Return Line

After years of use, your fuel sending unit can wear out or stop working. When that happens, it can cause significant issues for the fuel gauge. Ensure that you always know how much fuel you actually have by replacing your...

Product#: MF292

1962-76 Dodge, Plymouth A, B, E Body; Fuel Tank Sender Lock Ring and Rubber Gasket

Reproduction of the original style fuel sending unit lock ring and gasket designed for use with various 1962-1976 Dodge and Plymouth models as listed. Install the sending unit on your vehicle with the quality replacement...

Product#: MF443

1970-74 Challenger, Barracuda, Cuda; Sending Unit; Stainless Steel; 1/2" Pickup; 1/4" Fuel Return

Reproduction of the original fuel tank sending unit designed for use with 1970-74 Dodge Challenger and Plymouth Barracuda and Cuda models with 1/2" pickup and 1/4" fuel return. After years of use, your fuel sending unit can...

Product#: TK0120

Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: TK0121

Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: MF380

1970-74 Dodge, Plymouth E-Body; Fuel Sending Unit Ground Strap; 7-1/2" Steel

Reproduction fuel tank sending unit ground strap for 1970-74 Dodge and Plymouth E-body models. Made of stamped steel replicating the original in design, appearance, and fitment. Measures 7-1/2" in length. For 3/8 & 5/16"...

Product#: TK0122

Fuel Tank Sending Unit; 5 Hole; "Universal" 10-180 Ohm; For VDO Gauges

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: AM9109

Autometer; Universal; Fuel Signal Adaptor for Autometer Gauges;

The Fuel Bridge wires in between your fuel level gauge and sending unit and allows you to use any AutoMeter fuel level gauge with any stock or aftermarket sending unit. The triple push button with LED display allows for easy...

Product#: 19161

Holley Sniper EFI; Fuel Tank Sending Unit; 0-90 Ohms

Sniper EFI fuel gauge senders are a big help during your installation. They can be used as a replacement for your existing unit. Or if you decide to upgrade your dash to aftermarket gauges, we have a sending unit with the...

Product#: MF291

1962-76 Mopar Stainless Steel Fuel Sender Lock Ring Only

Install the sending unit on your vehicle with a heavy duty stainless steel lock ring for superior corrosion resistance. Lock ring is manufactured from stainless steel for a longer lasting part that fits exceptionally well and...

Product#: K404

Fuel Sending Unit Filter Strainer; For 5/16" Pickup Tube

Correct OER® reproduction of the original fuel tank float strainer designed for use with various 1942-85 GM, Chrysler, Dodge, Plymouth models as listed below. This filter will keep dirt and other elements from clogging or...

Product#: AM3262

Auto Meter Universal Fuel Tank Sending Unit; 240 Ohms Empty, 33 Ohms Full

This is a universal 5-bolt fuel sending unit for use with Auto Meter universal fuel gauges. This unit is not included with the gauges packages and must be purchased separately. It is used with gauges that require 240 ohms...

Product#: MF289

1962-76 Mopar Ground Strap Sending Unit 3-3/4" Stainless Steel

Fuel tank sending unit ground strap for for most 1962-76 A-body, B-body and E-body models. Attaches near the short fuel hose that joins the fuel tank sender line and the long fuel line. Made of long lasting stainless steel....