Product#: UK915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 36" Long

This universal anti-squeak insulator set includes two rubber strips that insert in between the gas tank and the mounting straps to eliminate any noise from tank movement and vibration which may occur. One foam rubber pad...


Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...


Product#: FT1103B

1976-81 Camaro, Firebird; 76-79 Nova, Apollo, Omega, Ventura; Fuel Tank Mounting Straps; Stainless Steel; Pair

Reproduction of the original style fuel tank mounting straps designed for use with 1976-81 Camaro, Firebird, and 1976-79 Nova, and X-body GM models. Each strap is manufactured in quality stainless steel to original factory...


Product#: FT1103A

1976-81 Camaro, Firebird; 1976-79 Nova; Fuel Tank Mounting Straps; Pair

Reproduction fuel tank mounting straps produced using heavy duty zinc-plated pre-formed steel for an original appearance. If you are replacing your gas tank or restoring your classic, you may want to replace your old gas tank...


Product#: CX5042

1965-97 GM; Fuel Tank Sending Unit; 0-90 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube

Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...


Product#: 153845

1979-81 Camaro, Firebird; Fuel Tank Filler Neck

Reproduction of the original fuel tank filler neck for use with 1979-81 Camaro and Firebird models. Manufactured to factory specifications featuring the correct gas cap opening for proper fit, and functionality. Each filler...


Product#: K915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps

Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...


Product#: 25000308

1976-81 Camaro, Firebird, 1973-79 Nova, X-Body; Fuel Tank Sending Unit; with Return Line; 3/8" Line

Reproduction fuel tank sending unit for a variety of GM models. After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send...


Product#: 25000309

1976-81 Buick, Chevy, Olds, Pontiac; Fuel Tank Sending Unit; 3/8" Single Line

After years of use, your fuel sending unit can wear out or stop working entirely. When that happens, it can cause your fuel gauge not to work or even send incorrect readings to the fuel gauge. Ensure that you always know how...


Product#: T76063

Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap

Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...


Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm
NEW

Product#: TK0120

Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...


Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges
NEW

Product#: TK0121

Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...


Product#: 153350

Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each

Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...


Product#: 265385

EFI Fuel Return Adapter Set

When converting a carbureted vehicle to an EFI system that requires a fuel return system, there's no longer any need to buy an expensive fuel tank. This adapter creates a return system simply by cutting a 2-3/4" section out...

EFI Fuel Return Adapter Set

MSRP $71.99 set
Classic $64.99 set

Fuel Tank Sending Unit; 5 Hole; "Universal" 10-180 Ohm; For VDO Gauges
NEW

Product#: TK0122

Fuel Tank Sending Unit; 5 Hole; "Universal" 10-180 Ohm; For VDO Gauges

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...


Product#: FTA45111

Universal Fuel / Gas Tank Return Line Fitting Conversion Install Kit; -6AN to 1/4 in. NPT

If you are installing an in-line fuel pump or an aftermarket fuel-injection setup but are using an original fuel tank not originally provisioned for a return line, this universal return line fitting kit is a simple and...


Product#: H19250

Holley Easy Level Feul Level Sending Unit w/ LiDAR Technology

The Holley Easy Level sender uses LiDAR technology to precisely measure the depth of fuel remaining in your tank and works with all Classic Instruments' fuel gauges, including short-sweep, full-sweep, and selectable ohm range...


Product#: AM9109

Autometer; Universal; Fuel Signal Adaptor for Autometer Gauges;

The Fuel Bridge wires in between your fuel level gauge and sending unit and allows you to use any AutoMeter fuel level gauge with any stock or aftermarket sending unit. The triple push button with LED display allows for easy...


Product#: 19161

Holley Sniper EFI; Fuel Tank Sending Unit; 0-90 Ohms

Sniper EFI fuel gauge senders are a big help during your installation. They can be used as a replacement for your existing unit. Or if you decide to upgrade your dash to aftermarket gauges, we have a sending unit with the...


Product#: FTA45113

Universal Fuel / Gas Tank Return Line Fitting Conversion Install Kit

If you are installing an in-line fuel pump or an aftermarket fuel-injection setup but are using an original fuel tank not originally provisioned for a return line, this universal return line fitting kit is a simple and...