Product#: *38333

1968-81 GM Pedal Pad Kit; Auto Trans; 3 Piece Kit; Various Models

Reproduction of the original pedal pads to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission. Replacing the pedal pads...


Product#: K920

1967-81 Buick, Chevrolet, Pontiac, Oldsmobile; Brake Pad Trim Plate; with Auto Trans

Correct reproduction of the original chrome brake pad trim bezel designed for use with various GM 1967-81 F, Y, and X body models with automatic transmission brake pads. Manufactured in stampled aluminum featuring a bright...


Product#: K982

1964-82 Buick, Chevy, Pontiac, Oldsmobile; Brake Pedal Pad; with Auto Trans; Drum Brakes

Reproduction of the original brake pedal pad for use on various 1964-82 GM models with automatic transmissions. Manufactured in quality EPDM flexible rubber that makes installation easy when appplying to the brake pedal....


Product#: 3930091

1967-81 Camaro, Firebird, 1968-74 Nova; Brake Pedal Pad; with Auto Trans & Disc Brakes

This correct OER® reproduction of the original brake pedal pad is designed for use on various GM models including 1968-70 Camaros equipped with both an automatic trans and disc brakes. The reproduction features the...


Product#: MT3207F

1972-81 Chevrolet Camaro & Pontiac Firebird; Brake & Clutch Pedal Assembly

Reproduction of the original brake and clutch pedal assemblies designed for use with 1972-81 Camaro and Firebird. Perfectly constructed clutch pedal assembly and brake pedal assembly manufactured to original factory...


Product#: 154822

Universal Frame Mount Manual Brake Pedal Assembly

Frame mount brake pedal assembly for power brake applications. Powder coated in black, each kit comes with pedal pad to complete the assembly. Includes black powder coated brake pedal rod, brake pedal pad and hardware. For...


Product#: 153660Z

3/8"-24 Brake Pedal Clevis; Zinc Plated

Brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is zinc...


Product#: 748803

1972-81 Camaro, 1976-79 Nova, 1978-81 Firebird; Clutch Pedal Pad; Various Other GM Models

Reproduction of the original clutch pedal pad that was installed on 1972-81 Camaro 1978-81 Firebird and 1976-79 Nova manual transmission models (except M21 4-speed trans). Each pedal pad is manufactured to replicate the...


Product#: 153651

Brake Pedal Rod Extension; 4-3/4"; Zinc Plated; Universal Fit

Universal fit pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod can be cut to your desired length if necessary. Rod measures 4-3/4"...


Product#: *38334

1968-81 GM Pedal Pad Kit; Disc Brake; Auto Trans; 3 Piece Kit; Various Models

Reproduction of the original pedal pads to fit various GM models. This pedal pad set is designed to replace the worn out original pads for models equipped with disc brakes and automatic transmission. Replacing the pedal pads...


Product#: 153661

Brake Pedal Rod Extension; 1-1/2" with 3/8" hole; Zinc Plated

Brake pedal rod extension is ideal for firewall mounted brake boosters or under-floor linkage when you need a longer rod to reach the pedal. Rod measures 1-1/2" overall, hole size is 3/8" on the end, 3/8'-24 threads. Comes...


Product#: 153660C

Brake Pedal Clevis; Chrome Plated; 3/8"-24

Brake pedal clevis for many potential uses, including connecting a brake master cylinder or power brake booster pushrod to the brake pedal arm. Measures approximately 2" long, is tapped for 3/8-24 fine thread, and is chrome...


Product#: 154230

Universal Pedal Rod Extension; 3/8"-24; Extends 6-1/2 to 7-1/2"

Universal fit Pedal Rod Extension with a 3/8-24" thread size commonly used on various classic truck applications to extend the pedal to 6-1/2 to 7-1/2 inches in length. Features grease fitting to keep coupler properly...


Product#: 154233

3/8"-24 Push Rod Extension; 4-3/4" Long; Female / Male Thread

Universal fit Pedal Rod Extension with a 3/8-24" thread size rod that is commonly used on various classic car applications to extend the pedal to 4-3/4 inches in length. Features male / female ends.


Product#: BG6131

1962-67 Nova Lokar Billet Brake Pedal Pad w/Auto Trans - Curved Style - Black w/Rubber Inserts

Lokar's Curved style brake pedal pad cover made from billet aluminum adds style and function to your classic car. Designed with hidden screws, these pads match and bolt directly to the factory steel pedal. Available in either...


Product#: BG6005

Lokar Black Anodized Billet Aluminum Standard Size 2" x 3" Brake Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet aluminum brake pedal pad. Designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA


Product#: BAG6005

Lokar Billet Aluminum Standard 3" x 2" Brake Pedal Pad with Rubber Inserts

Brushed billet aluminum brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA


Product#: XSG6008

Lokar Brake Pedal Pad Standard Size (3" X 2") Black Steel With Rubber Inserts

Black steel brake pedal pad mounts with a 1/2"-20 stud built into the back of it. Made in USA This is the standard-size gloss black brake pedal pad with rubber inserts and measures 3" x 2".


Product#: BG6016

Lokar Black Steel Throttle Assembly W/Rubber Inserts & X-Large 2" X 5" Pedal Pad

Gleaming polish not your style? Then take a look at this stealthy black steel spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left side of the...


Product#: BG6013

Lokar Black Anodized Billet Aluminum Extra Large 2-3/4" X 3-3/4" Brake Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet aluminum brake pedal pad. Designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA