Flat Washer; 1/2" USS; Zinc Plated
1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1960-81 GM; Body Shim Set; 1/16" Thick, 1-1/4" x 1-1/8"; with 3/8" Bolt Slot; Zinc Plated; 10 Piece Set
Classic $5.99 set
Hex Bolt; 1/2"-13 x 4" LG; Gd 8; Yellow Dichromate
Hex Bolt; 1/2"-13 x 4" Lg; Gd 8; Yellow Dichromate Application 1973-1980 Chevrolet/GMC Radiator Core Support; STD Cab 1/2 & 3/4 Ton 1973-1980 Chevrolet/GMC Radiator Core Support; Crew Cab 3/4 Ton 1973-1980 Chevrolet/GMC Front...
Bolt, 5/16-18 x 3/4" Pointed Tip With Hex Washer Head, Black Phosphate, 10 Piece Set
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. The OER® Authorized logo represents...
Bolt, 5/16-18 x 3/4" Pointed Tip With Hex Washer Head, Black Phosphate, 10 Piece Set
Classic $8.99 set
1/2"-13 Prevailing Torque Lock Nut; Cadmium Plated
1/2"-13 Prevailing Torque Lock Nut; Grade 8; Cadmuim Plated
Bolt; 1/2"-13 x 5" Lg Hex Head Cap Screw; Grade 8
1/2"-13 x 5" Hex Head Cap Screw; Grade 8
J-Type Clip Nut, Fits 5/16-18 bolts, Black Phosphate Coated
OER® Authorized reproduction J-nut that was used for the installation of many products on the front end of various GM models. Correct hardware can make any installation job easier. Replace your missing or damaged hardware...
Reproduction of the original front and rear cab mount bushing set for 1973-80 Chevrolet and GMC 1/2 ton 4WD or 3/4 ton Pickup models. Each 20-piece bushing set includes upper and lower bushing, bolts and spacers/washers....
1973-80 Chevrolet/GMC 3/4 ton Pickup; Cab Mount Bushing Set; Standard Cab; Front & Rear; 4 Bushins; 20 Total Pieces
Classic $129.99 set
Reproduction of the original front and rear cab mount bushing set for 1973-80 Chevrolet and GMC 1/2 ton 2 WD Pickup models. Each 18-piece bushing set includes upper and lower bushing, bolts and spacers/washers. Note: 2...
1973-80 Chevrolet/GMC 1/2 ton 2WD Pickup; Cab Mount Kit; Standard Cab; Front & Rear; 4 Bushings; 18 Pieces Total
Classic $99.99 set
1973-80 Chevrolet/GMC C-Series 2WD Truck; Radiator Core Mount Bushing; with Hardware
Replacement radiator support bushing designed for 1973-80 Chevrolet and GMC Pickup, Blazer, Jimmy and Suburban models. Bushing is used for body mount or radiator core on a wide variety of models. Includes upper and lower...
1973-80 Chevrolet/GMC C-Series 2WD Truck; Radiator Core Mount Bushing; with Hardware
Classic $32.99 ea
1960-81 GM; Body Mount Shims; 1/8" Thick, 1-1/4" x 1-1/8"; 3/8" Bolt Slot; Zinc Plated; 10 Piece Set
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
1960-81 GM; Body Mount Shims; 1/8" Thick, 1-1/4" x 1-1/8"; 3/8" Bolt Slot; Zinc Plated; 10 Piece Set
Classic $5.99 set
1961-1981 GM; Body Shims; 15/64"; 10 Piece Set
Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...
J-Type Clip Nut Set, Fits 5/16-18 bolts, Black Phosphate Coated, 10 Piece Set
OER® Authorized reproduction J-nut that was used for the installation of many products on the front end of various GM models from 1959-74. The OER® Authorized logo represents products that meet or exceed stringent...
J-Type Clip Nut Set, Fits 5/16-18 bolts, Black Phosphate Coated, 10 Piece Set
Classic $16.99 set
Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate, 10 Piece Set
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. The OER® Authorized logo represents...
Bolt, 5/16-18 x 13/16" Pointed Tip With Hex Washer Head, Black Phosphate, 10 Piece Set
Classic $8.99 set
BOLT, 5/16-18 X 1-1/4" Pointed Tip With Hex Washer Head, Black Phosphate, 10 Piece Set
OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models from 1955-1974. The OER® Authorized...
BOLT, 5/16-18 X 1-1/4" Pointed Tip With Hex Washer Head, Black Phosphate, 10 Piece Set
Classic $8.99 set
1/2" SAE Flat Washer; Grade 8 High Strength; bright zinc Specifications: Bolt Size : 1/2" Inner Diameter : 17/32" Outer Diameter : 1-1/16" Thickness : 0.097-0.121" Finish : Zinc & Gold Dichromate Grade : 8 Material : 1035...
A true performance application component for cars, trucks, hot rods and racing and competition vehicles ? yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged...
1973-80 Spacer - Cab Mount; 4WD - 1/2 Ton; All 3/4 Ton
Replace your old and rusted upper spacer for the rear cab mount on your 4 wheel drive 1/2 ton or all 3/4 ton pickups. These new spacers will hold the cab in it's proper position for better body panel alignment. The spacer is...
Reproduction of the original upper body cushion mount bushing for use with the front cab corner on 1973-80 Chevrolet and GMC 1/2 & 3/4 ton, 2 wheel drive pickup trucks. This cushion is manufactured in quality neoprene rubber...