Product#: MT80861Z

1965-70 Various GM Vehicles Including Chevelle, 442, Wildcat; Gear Kit; Muncie M22; Close Ratio 2.20; 10 Spline; 26 Tooth

This kit comes with the best quality gears that are made out of USA grade steal 86/20 for various GM applications including 65-70 Chevrolet Chevelle, Buick, Skylark, and Pontiac GTO models. These gearsets are heat treated...

Product#: MT52882Z

1966-70 Various GM Vehicles Including Impala, GTO, Skylark Models; Rebuild Kit; Muncie 4 Speed; M20, M21, M22

Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market.  This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...

Product#: 9793565

1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter

Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...

Product#: 3921147W

1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;

Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...

Product#: 3921147B

1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;

Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...

Product#: 3922525

1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;

Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...

Product#: F872

1969 Camaro, 1968-69 Firebird; Floor Shifter Assembly; with 4 Speed Hurst

Reproduction of the original style Hurst 4 speed shifter designed for use on 1968-69 Firebird, and 1969 Camaro models with a Muncie transmission. This assembly will replace worn or damaged original shifter assemblies. This...

Product#: 3866568

1958-83 GM; Clutch Bellcrank Pivot Ball; Block Side; Screw-In Type; 3" Overall Length

This is an exact reproduction of the original block side pivot ball screw designed for use with various 1958-83 GM models as listed. Each clutch bellcrank pivot ball is manufactured from hardened steel replicating the...

Product#: 3893853

1967-69 Camaro; Floor Shift Boot, without Console; Manual Trans

Reproduction of the original floor shift boot for use on all 1967-68 Camaro 3 and 4 speed models without center console. Also fits 1969 Camaro 3 speed models without center console. The lower boot is manufactured from quality...

Product#: 3914896

1967-69 Camaro Big Block, 1968-72 Chevy II / Nova Big Block Clutch Fork Return Spring

OER® reproduction clutch fork return spring. Attaches from the engine mounting bracket to the clutch extension wire. Measures 5-1/8" O.L. 2-3/4" spring portion. You are assured that every OER® part offe red is...

Product#: 3961437A

1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base

Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...

Product#: 3912606

1967-72 Clutch Fork Return Spring Extension Bracket ; Big Block

OER® reproduction of the original clutch fork return spring bracket installed on various GM models with a factory installed big block engine. Allows correct function and mounting of the clutch fork return spring....

Product#: 1050080

1967-1992 Chevrolet Camaro, Pontiac Firebird; Transmission Shift Control Lever; Hurst Quarter Stick shifter and Dual Gate Shifter Arm

Hurst Quarter Stick shifter and Dual Gate Shifter Arm transmission select lever for 1967-92 Camaro and Firebird using a Trubo-Hydramatic 350 or 400 tranmissions. using Hurst Quarter Stick shifter 3160001, 3160006 and 3160016,...

Product#: CP2497Z

1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield

Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...

Product#: FMB70

Lokar Floor Shifter Boot with Stainless Steel Ring

This floor mount shifter boot and retaining ring are the perfect match for Lokar's floor mount shifter. Made in USA Inner ring dimension s measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

Product#: 27163

TCI 6X Transmission Package with Paddle Shifter

Get the latest in automatic transmission technology with the innovative TCI 6x six speed! Designed for Chevy small block, big block, and LS engines, this 4L80E-based transmission is perfect for both everyday driving and race...

Product#: TR7540

1967-69 Camaro; Firebird; American Powertrain Magnum 6-Speed Driveline Conversion Set; 700ft-lb Constant Load Rated; Wide Ratio 0.50 O.D.

Each American Powertrain Conversion kits include the components required to convert your vehicles manual driveline to a high perforamance Tremec Magnum 6-speed overdrive transmission. Magnum 6-speed (Wide Ratio) is rated at...

Product#: TR7528

1967-69 Camaro; Firebird; American Powertrain TKX 5-Speed Driveline Conversion Kit; 600ft-lb Constant Load Rated; Wide Ratio; 0.68 O.D.

American Powertrain ProFit Conversion combo kits include the components required to convert your vehicles manual driveline to a modern Tremec TKX 5 speed manual overdrive transmission. Specially prepped case mods for easier...

Product#: TR7522

1967-69 Camaro; Firebird; American Powertrain TKX 5-Speed Driveline Conversion Kit; 600ft-lb Constant Load Rated; Quick Launch Close Ratio; 0.72 O.D.

American Powertrain ProFit Conversion combo kits include the main components required to convert your vehicles driveline to a modern Tremec TKX 5 speed manual overdrive transmission. Specially prepped case mods for easier fit...

Product#: TR1016

1963-70 UltraCase M22W Wide Ratio Gearset 4 Speed Transmission; M22W Wide Ratio 2.56-1st, 1.75-2nd, 1.37-3rd, 1;1-4th; 10/27 Spline; Bolt Levers

There are exotic transmissions designed for the quarter mile or circle tracks, but if your Muscle Car sees city streets or country lanes you need a heavy-duty, synchronized, close-ratio gearbox with a helical gearset and, to...

Product#: TR1021

UltraCase M22Z 4 Speed Transmission: M22 CLOSE RATIO 2.98-1st, 2.04-2nd, 1.46-3rd. 1.0 4th; 10/27 Spline; Bolt Levers

There are exotic transmissions designed for the quarter mile or circle tracks, but if your Muscle Car sees city streets or country lanes you need a heavy-duty, synchronized, close-ratio gearbox with a helical gearset and, to...

Product#: TR1019

1963-70 UltraCase M22X Road Racing Gearset 4 Speed Transmission; M22X Road Race 2.20-1st, 1.51-2nd, 1.17-3rd, 1;1-4th; 10/27 Spline; Bolt Levers

There are exotic transmissions designed for the quarter mile or circle tracks, but if your Muscle Car sees city streets or country lanes you need a heavy-duty, synchronized, close-ratio gearbox with a helical gearset and, to...

Product#: TCET17722

American Powertrain TKX 5-Speed Tremec Transmission; GM Applications; 26-Spline; Close Ratio: 0.81 O.D.

These American Powertrain Tremec TKX 5-speed series overdrive high performance transmissions. Available in (Road Race) edition and offers a variety of flexibility features and is rated at 600 ft/lbs, includes a unique...

Product#: A98198681

1955-91 GM Cars & Trucks with V8 Engines - Fidanza Aluminum Flywheel (168 Teeth)

Get faster throttle response, quicker acceleration, and smoother shifting with a Fidanza billet aluminum flywheel! Fidanza billet aluminum flywheels are CNC machined from the highest quality 6061-T6 aluminum to deliver...

Product#: A98198541

1955-86 GM Cars with V8 Engines - Fidanza Aluminum Flywheel (153 Teeth)

Get faster throttle response, quicker acceleration, and smoother shifting with a Fidanza billet aluminum flywheel! Fidanza billet aluminum flywheels are CNC machined from the highest quality 6061-T6 aluminum to deliver...

Product#: 5381000

Hurst; Nitro Stick Shift Handle; With Built-In 12V Switch; Anodized Aluminum Finish

The Hurst Nitro Stick shift handle is designed to bring the classic 'pistol grip' well into the 21st Century. Machined from billet 7075 aluminum, brushed then given a clear anodized finish, the Nitro stick provides a positive...

Product#: 5010002

Hurst; Indy Universal 3-Speed Manual Transmission Shifter Assembly; Car Style (Short); Fits Many 1949-Later Chrysler, GM And Ford

This economically priced manual transmission shifter is of universal design, so it will fit a wide variety of applications. It is ideal for converting column shift 3 speeds to floor shift. Features: Spring loaded gate for...

Product#: 3912010-BCCS

Hurst; Blackjack Short Throw Shifter; 1969 Camaro; With Tremec TKO 500/600 Or TR3550 5-Speed Transmission

This Hurst Blackjack Shifter is specifically designed to locate the shifter handle in the proper location for 1969 Chevrolet Camaro applications when using a Tremec TKO 5-speed transmission. Hurst Blackjack shifter housings...

Product#: 3737437

Hurst; Competition Plus 4-Speed Shifter Installation Kit; 1969 F-Body; With Or Without Console; Muncie M20,M21 (452) Transmission

Installation set for Hurst Competition Plus shifter in 1969 models with a Muncie transmission. Includes hardware. Note:Fits 1969 Chevrolet Camaro & Pontiac Firebird with/without a console and Muncie M20, M21 (452)...

Product#: AP20100

American Powertrain White Lightning Billet Aluminum Tremec T56 Magnum Shifter - 1" Offset

American Powertrain White Lightning short-throw shifter for Tremec Magnum 6-speed transmissions. They feature a billet aluminum body with billet steel internals, an 8-way adjustable ?Revolution? offset and independent...

Product#: AP10100

American Powertrain White Lightning Billet Aluminum Tremec TKO Shifter - 1" Offset

American Powertrain White Lightning short-throw shifter for Tremec TKO transmissions. They feature a billet aluminum body with billet steel internals, an 8-way adjustable ?Revolution? offset and independent adjustable spring...

Product#: E375

1969 Camaro; Shifter Linkage Kit; Big Block

Reproduction of the original shifter linkage components designed for use with 1969 Camaro SS, RS, models with big block engines (396). This kit includes all the necessary components to replace the linkage for models with...

Product#: 3660001

Hurst; Mastershift Shifter Assembly; 3-Speed Manual

This is our Hurst Mastershift 3-speed shifter assembly without a shift stick or shift ball. It is intended for Universal applications and will require some fabrication to adapt to your build. Same great Mastershift shifter,...

Product#: M37010

MOMO Trofeo Shift Knob - Mohogany / Beech Wood

The MOMO Trofeo shift knob is born through extensive prototyping to find the perfect ergonomics for the driving enthusiast in a manual vehicle. It can be grasped in the palm of the hand but is equally adept for three-finger...

Product#: 5387436

1969 Camaro, Firebird With Or Without Console With Muncie; 1973-77 Camaro With Console With Saginaw; Hurst Competition Plus Shifter Stick; 10.18" Tall; 4.75" Setback; Chrome

Hurst bolt on shifter sticks are ideal for use in custom applications where a particular height or offset is required. These shifter sticks are constructed from high strength steel and are stamped with the Hurst name and has...

Product#: 5388620

Hurst; Competition Plus Shifter Stick; 15.45" Tall; Chrome; For Use With Bench Seat

The Hurst Competition/Plus bolt-on shift sticks are ideal for use where a particular height or offset is required. This stick is specifically designed for bench seat applications. The shift sticks are constructed from high...

Product#: MS11069BK

Shifter bezel kit with boot; Billet Aluminum; Contoured style; 5.25"W X 6.75"L; Gloss black

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Contoured step down design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: MS11069CL

Shifter bezel kit with boot; Billet Aluminum; Contoured style; 5.25"W X 6.75"L; Clear coat

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Contoured step down design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: MS11069CA

Shifter bezel kit with boot; Billet Aluminum; Contoured style; 5.25"W X 6.75"L; Clear anodized

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Contoured step down design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: 53800HST

Hurst; Tube Style Shifter Stick; Chrome; 16"; M/T

Hurst shifter sticks are a great way to bring a more modern look to your interior. They also provide comfort by offering the correct height and pullback required for individual needs. With common attachments on both ends,...

Product#: 5388022

Hurst; Competition Plus Shifter Stick; Chrome; 12" Tall; Set Back 7.5"; M/T

Hurst Competition/Plus bolt-on shift sticks are ideal for use where a particular height or offset is required. These shift sticks are constructed from high strength steel, are stamped with the Hurst name and triple chrome...

Product#: LK611

Lokar Brushed Billet Aluminum Tremec TKO 500-600 Single Bend 10" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK613B

Lokar Black Billet Aluminum Tremec TKO 500-600 Straight 8" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK614B

Lokar Black Billet Aluminum Tremec TKO 500-600 Single Bend 6" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK620B

Lokar Black Billet Aluminum Tremec / Borg Warner T5 T56 Straight 6" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...

Product#: LK612

Lokar Brushed Billet Aluminum Tremec TKO 500-600 Single Bend 8" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK615

Lokar Brushed Billet Aluminum Tremec TKO 500-600 Straight 6" Shift Lever

Lokar billet aluminum shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever is a...

Product#: LK617

Lokar Brushed Billet Aluminum Tremec / Borg Warner T5 T56 Single Bend 8" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...

Product#: LK616B

Lokar Black Billet Aluminum Tremec / Borg Warner T5 T56 Single Bend 10" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...

Product#: LK616

Lokar Brushed Billet Aluminum Tremec / Borg Warner T5 / T56 Single Bend 10" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...

Product#: LK618B

Lokar Black Billet Aluminum Tremec / Borg Warner T5 T56 Straight 8" Shift Lever

Lokar billet aluminum shifter lever for Tremec and Borg Warner T5, T45, and T56 transmissions. Feature a slotted design that compliments other Lokar accessories and machined groove for boot attachment. Made in USA This lever...

Product#: MS11068BA

Shifter bezel kit with boot; Billet Aluminum; Ball Milled style; 5.25"W X 6.75"L; Black anodized

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Ball Mill design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: MS11068MB

Shifter bezel kit with boot; Billet Aluminum; Ball Milled style; 5.25"W X 6.75"L; Matte black

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple Ball Mill design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple...

Product#: 5389024

Hurst; Billet Plus Shifter Stick; Black Machined Finish; 8" Tall; Set Back 2.88"; M/T

This replacement Hurst Billet/Plus shift stick is a great way to bring a more modern look to your vehicle's interior. The 8-inch tall stick is CNC machined from billet 7075 aluminum, given a MIL-Spec black anodized finish and...

Product#: LK6662

Lokar Chrome Tubular Tremec TKO 500-600 / Magnum Single Bend 16" Shift Lever

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Product#: LK6603

Lokar Chrome Tubular Tremec TKO 500-600 / Magnum Single Bend 10" Shift Lever

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Product#: LK6604

Lokar Chrome Tubular Tremec TKO 500-600 / Magnum Double Bend 16" Shift Lever

Lokar tubular steel shifter lever for Tremec TKO 500, TKO 600, and Magnum transmissions. Feature a machined billet steel mounting stud countersunk for the included socket head cap screws. Made in USA This lever is a direct...

Product#: MS11067BK

Shifter bezel kit with boot; Billet Aluminum; Smooth style; 5.25"W X 6.75"L; Gloss black

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple smooth design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple installation....

Product#: MS11067BA

Shifter bezel kit with boot; Billet Aluminum; Smooth style; 5.25"W X 6.75"L; Gloss black anodized

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple smooth design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple installation....

Product#: MS11067CA

Shifter bezel kit with boot; Billet Aluminum; Smooth style; 5.25"W X 6.75"L; Clear anodized

It's all about the shift with these high quality billet aluminum shifter bezel kits. With a simple smooth design, this bezel kit comes with the shift bezel, Naugahyde boot, and backup mounting plate for simple installation....