Product#: KW953

1967-69 Camaro, Firebird; Rear Shock Reinforcement Plate

Reproductions of the original rear shock mount reinforcement plate for 1967-69 Camaro and Firebird models. This die stamped, heavy steel plate mounts to the trunk floor and has features two threaded holes.Comes with black EDP...

Product#: K5926610

1967-69 F-Body g-Connector Subframe Connector Kit for Torque Arm Suspensions - Black Anodized Finish

Chassisworks g-Connector connect the front and rear frame rails, then bridge the left and right sides together. Improves chassis rigidity and yields more responsive handling and sharper acceleration. Fits completely under...

Product#: K5901610

67-69 F-Body g-Connector Subframe Connector Kit for g-Bar / Leaf Springs Suspensions - Black Finish

Chassisworks g-Connector connect the front and rear frame rails, then bridge the left and right sides together. Improves chassis rigidity and yields more responsive handling and sharper acceleration. Fits completely under...

Product#: D11301

1967-69 Camaro/Firebird; Coupe; With Stock Trunk Pan; Detroit Speed; 4-Point Roll Cage

This 4-point roll cage from Detriot Speed and Engineering is made from 1-5/8" x.134" mild steel and follows the lines of the coupe, staying close to the headliner and back window glass to minimize the impact on interior...

Product#: 11167300

1967-69 Camaro, Firebird; Subframe Connectors; Coupe

The Ridetech subframe connectors for 1967, 1968, and 1969 Camaro / Firebird add rigidity to your vintage F-Body chassis and improve performance by reducing chassis flex. Easy to install removes chassis flex integrated leaf...

Product#: H4007

1967-69 Camaro / Firebird Coupe Hotchkis Subframe Connectors

Hotchkis Sport Suspension subframe connectors are strategically engineered to add chassis rigidity for improved vehicle performance and longevity by reducing chassis flex. Fabricated from 1.5" x 2.5",.120" wall rectangular...

Product#: 52093

1967-69 Camaro; Firebird; QA1 Subframe Connector and Solid Body Mount Kit; Includes Hardware

QA1's Subframe connector and solid body mount kit increases frame rigidity and provides a significant improvement in handling performance. This kit designed specifically for your 1967-69 Camaro or Firebird reduces unibody...

Product#: K5904610

1967-69 Camaro/Firebird Center g-Connector Support, Bolt-In

Center g-Connector Support for 67-69 Camaro - Tubular support brace spans the undercarriage, connecting the driver- and passenger-side frame connectors. K5601 Chassisworks subframe c onnectors required for installation....

Product#: BX20010B

1967-69 F-Body BMR Bolt-In Subframe Connectors with Black Hammertone Finish

BMR's bolt-in subframe connectors are a great alternative to weld-in connectors. Manufactured from laser-profiled square tubing and CNC formed frame boxes, these subframe connectors bolt in around the rear frame rails and...

Product#: BX20010A

1967-69 F-Body BMR Bolt-In Subframe Connectors with Red Powder Coat Finish

BMR's bolt-in subframe connectors are a great alternative to weld-in connectors. Manufactured from laser-profiled square tubing and CNC formed frame boxes, these subframe connectors bolt in around the rear frame rails and...

Product#: H10063A

1967-69 Camaro / Firebird Convertible; Subframe Connectors; For Heidt"S Pro-G Front Subframe

Reinforce the chassis of your Heidt's-front-subframe-equipped models with a set of subframe connectors. Subframe connectors reinforce the connection between the frame of the car and front subframe, enhancing chassis rigidity...

Product#: D10101

1967-69 Camaro/Firebird; Detroit Speed; Weld-In Subframe Connectors

These weld-in subframe connectors are fabricated from 2" x 3" x.120" wall rectangular tubing. The connectors are barely visible from underneath the vehicle. The rear of the connector is tapered to attach to the rear frame...

Product#: H1404

1967-69 Camaro / Firebird Convertible Hotchkis Cross Brace

This Hotchkis Sport Suspensioin cross brace body pan for 1967-69 convertible models replaces the factory brace to add extra rigidity to the chassis. At the same time, the stronger, more efficient design of this brace allows...

Product#: BX20011

1967-69 Camaro / Firebird BMR Weld-In Subframe Connectors

BMR's weld-in subframe connectors provide the best front-to-rear subframe connection possible. Manufactured from laser-profiled 2" x 2" square tubing and CNC formed 3/16" frame boxes, the BMR subframe connectors weld through...

Product#: BX20020B

1967-69 F-Body Convertible BMR X-Brace Support with Black Hammertone Finish

BMR's Tunnel Brace is laser cut from 1/8" steel and features a CNC formed X-braced design to further strengthen this critical area. This brace replaces the factory brace on convertibles, reinforcing the chassis and provides...

Product#: C125R

1967-69 Camaro / Firebird Rear Shock Tower Panel; RH

This is a correct reproduction of the original shock tower panel which replace the commonly rusted out area where the shock mounts attach to. This high quality reproduction is designed and manufactured to original...

Product#: D11302

1967-69 Camaro/Firebird; Coupe; With DSE Mini-Tub; Detroit Speed; 4-Point Roll Cage

This 4-point roll cage from Detriot Speed and Engineering is made from 1-5/8" x.134" mild steel and follows the lines of the coupe, staying close to the headliner and back window glass to minimize the impact on interior...

Product#: H4008

1967-1969 Camaro / Firebird Convertible Hotchkis Subframe Connectors

Hotchkis Sport Suspension subframe connectors are strategically engineered to add chassis rigidity for improved vehicle performance and longevity by reducing chassis flex. Fabricated from 1.5" x 2.5",.120" wall rectangular...

Product#: K5601

67-69 Camaro/Firebird Subframe Connectors

Body flex kills handling performance and weakens your chassis. Get the most from your new subframe assembly while strengthening your chassis by installing a set of bolt-in subframe connectors for 67-69 Camaro models using...

Product#: C900

1967-69 Camaro / Firebird Coupe Global West Suspension Subframe Connectors

Subframe connectors are used for high performance street and racing applications. It is no secret that tying the car together with subframes not only stiffens the chassis but improves vehicle response. These connectors tuck...

Product#: C900C

1967-69 Camaro / Firebird Convertible Global West Suspension Subframe Connectors

Subframe connectors are used for high performance street and racing applications. It is no secret that tying the car together with subframes not only stiffens the chassis but improves vehicle response. These connectors tuck...

Product#: H10020

1967-69 Camaro / Firebird Coupe Subframe Connectors for Factory Front Subframe

Heidt's subframe connectors stiffen the unibody and are completely bolt-on. These install with no cutting or floor modifications required. Attaches to front subframe and rear frame rails or 4-link brackets when used with...

Product#: H10021

1967-69 Camaro / Firebird Convertible Subframe Connectors for Factory Front Subframe

Heidt's subframe connectors stiffen the unibody and are completely bolt-on. These install with no cutting or floor modifications required. Attaches to front subframe and rear frame rails or 4-link brackets when used with...

Product#: H10062A

1967-69 Camaro / Firebird Coupe; Subframe Connectors for Heidt"s Pro-G Front Subframe

Reinforce the chassis of your Heidt's Pro- G front subframe equipped models with a set of subframe connectors. Subframe connectors reinforce the connection between the frame of the car and front subframe, enhancing chassis...

Product#: BX20020A

1967-69 F-Body Convertible BMR X-Brace Support with Red Finish

BMR's Tunnel Brace is laser cut from 1/8" steel and features a CNC formed X-braced design to further strengthen this critical area. This brace replaces the factory brace on convertibles, reinforcing the chassis and provides...

Product#: K5903611

1967-69 Firebird, 1967-81 Camaro OEM Adapter for g-Connector Subframe Connector System

Weld-in g-Connector adapter allows bolt-in installation of Chassisworks g-Connector frame bracing system to an OEM front subframe. Adapter is welded over end of OEM subframe to provide male mounting point for tubular subframe...

Product#: P1066

1967-69 Camaro / Firebird Convertible Pan Spacer Set for Pypes Exhaust

These steel spacers allow you to lower the convertible body brace so an X-pipe crossover assembly can be mounted. You must still cut the shield portion of your body brace and then flip it around for adequate ground clearance.

Product#: AM313170

1967-69 Camaro Art Morrison Weld-In Subframe Connectors

One of the most important chassis modifications you can make to a unibody car is to connect the front and rear subframes. This stiffens the chassis for improved handling and stability. These connectors can be used to...

Product#: C125L

1968-69 Camaro / Firebird Rear Shock Tower Panel; LH

This is a correct reproduction of the original shock tower panel which replace the commonly rusted out area where the shock mounts attach to. This high quality reproduction is designed and manufactured to original...

Product#: K7928

1968-69 Camaro, Firebird; Rear Shock Tower Support; LH Driver Side; EDP Coated

Reproduction of the original rear shock tower support panel for 1968-69 Camaro and Firebird models. This weld-in panel mounts between the frame rails and the trunk pan, providing critical reinforcement for the rear suspension...

Product#: K7929

1968-69 Camaro, Firebird; Rear Shock Tower Support; RH Passenger Side; EDP Coated

Reproduction of the original rear shock tower support panel for 1968-69 Camaro and Firebird models. This weld-in panel mounts between the frame rails and the trunk pan, providing critical reinforcement for the rear suspension...

Product#: 15603

1967-69 Camaro, Firebird; Convertible Body Pan; EDP Coated

Reproduction of the original steel body pan for use on 1967-1969 Camaro and Firebird convertible models. The convertible body pan installs under the transmission tunnel and helps keep the body from flexing. This part was only...