Product#: 11246

Headlamp Adjusting Screw ; For GM Models ; 1/4"-28 x 2"

Reproduction of the headlamp adjustment screw required for a wide variety of GM models including 1965-75 Impala, Biscayne, Bel Air and Caprice models. This 1/4"-28 adjustment screw comes zinc plated for corrosion resistance...

Product#: A5789

1962-71 GM Headlight 1/4"-28 x 1" Adjustment Screw with Nylon Nut

Original self-retaining nylon nut and 1/4"-28 x 1" screw assembly used for headlamp beam adjustment on 1962-71 GM models. This nut and screw mounts directly to the headlamp housing to enable the headlamp beam to be aimed...

Product#: 5953168

Headlamp Adjusting Spring

OER® reproduction of the original headlamp adjusting spring designed for use on various GM models. This headlamp spring is used to adjust the headlight beam to the proper alignment. Applications: 1973-1974 Buick Apollo...

Product#: 3903453

1967-69 Camaro; Rally Sport Headlamp Hinge Pivot Bolt; Each

Reproduction of the original bolt used to pivot the Rally Sport headlamp doors on 1967-69 Camaro models. This bolt installs through the control opening hinge and attaches the hinge to the headlamp housing on RS (hidden...

Product#: 41483

Screw #8 X 1" with #6 Phillips Head Tapping Screws; Chrome; Set of 4

Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.

Product#: *881399

1969 Chevrolet Camaro; Headlamp Adjuster Kit

Reproduction headlamp adjuster kit for 1969 Camaro models. Each kit has four 2" adjusting screws with nuts and two springs, enough for both headlamps. Chevrolet Applications: 1969 Camaro

Product#: 3925457

1968-69 RS Headlamp Bellcrank Bushings ; 4 piece set

Reproduction of the original headlamp bellcrank bushings designed for use on 1968-69 RS Camaros with the hidden headlamp option. The bushings for on the upper and lower bellcranks. Manufactured with injection molded tooling...

Product#: 9851

1/4"-28 GM Headlamp Adjuster Nylon Nut

This headlamp adjusting nut mounts directly to the headlamp housing and enables the headlamp beam to be aimed correctly on 1965-75 Impala/Full Size, 1967-77 Camaro and a wide variety of other GM models. White nylon nut is...

Product#: 3899863

1967-69 Camaro; Rally Sport; Headlight Hinge Bolt Set; Short; Set of 3

Reproduction of the original one-piece, shouldered stud headlight bolts designed for use on 1967-69 Rally Sport Camaros. This set includes 3 hinge bolts which are used to mount the control opening hinge to the control arm...

Product#: 3903454

1967-69 Camaro; RS Headlight Hinge to Housing Bushing; Each

Reproduction of the original style bushing that's part of the 1967-69 Camaro RS hidden headlamp hardware. This special bushing is designed to hold the headlight hinge to the headlight housing. 2 required per housing. 4...

Product#: A9400115

1940-81 GM; F-Body / Impala / Nova / Truck - Headlamp Retaining Ring Screw Set (6 Pieces)

Headlamp retaining ring screws are used to hold the headlamp bulb to the mounting bucket.

Product#: C452

1969 Camaro RS; Headlight Adapter Brackets; Pair

A great solution to any RS headlight conversion. These stamped curved plates will insert on any standard Camaro fender skirt and allow the headlights to sit further behind the grill area and allows the installation of the...

Product#: KW158A

1969 Camaro, 1969-71 Corvette; Headlight Washer Nozzle Mounting Hardware Set; Chrome

Reproduction of the original style hardware designed for use on 1969 Camaro, Nova, and Chevelle models original equipped with the optional headlamp washer nozzles. If you're installing or replacing a set of headlight washer...

Product#: C599

1969 Camaro Rally Sport; Headlight Bellcrank; LH Drivers Side

Reproduction of the original bellcrank assembly designed for use with 1969 Camaro Rally Sport models. Bell crank is manufactured in quality stamped steel to factory specifications replicating the original in design,...

Product#: CM6748

1969 Camaro Rally Sport; Inner Headlamp Door; RH Passenger Side; Made in the USA!

Reproduction of the inner portion of the headlamp door for 1969 Camaro Rally Sport models. This is the inner structure that the chrome die-cast trim and outer headlamp door attaches to. These doors are manufactured using the...

Product#: C597

1969 Camaro Rally Sport; Shaft and Lever Support; Pair

Reproduction of the original shaft and lever support for use with 1969 Camaro RS models. These levers are used to support shaft and lever assembly on all 1969 Camaro Rally Sport (hidden headlamp) models. This bracket will be...

Product#: A2303

J Nut #10 Screw Size;.027-.045 Panel Thickness; Phosphate

J Nut #10 Screw Size,.027-.045 Panel Thickness. Center of hole to Edge: 3/16". Phosphate Finish.

Product#: A1459

#10 x 1" Slotted Pan Head Tapping Screw; Zinc Chromate

#10 x 1" slotted pan head tapping screw. Bright Zinc chromate for rust resistance.

Product#: C622

1969 Camaro; Rally Sport Headlight Vacuum Reservoir Tank

Reproduction of the original vacuum reservoir tank originally installed on all 1969 Camaro models with Rally Sport vacuum headlights (retractable headlamps). Each canister is manufactured to exact specifications and functions...

Product#: C59

1969 Camaro; Rally Sport Headlamp Washer Hose Set

Reproduction of the original style headlight washer hoses and hardware required for 1969 Camaro Rally Sport models. This complete set includes all the necessary hoses to replace cracked, deteriorating or missing originals....

Product#: KW809

1969 Camaro; RS Headlight Door Stop Brackets; with Stoppers

Reproduction of the original RS headlight door stop brackets and rubber stoppers for use with 1969 Camaro Rally Sport models with hidden headlamps. Each bracket is manufactured in stamped steel replicating the original in...

Product#: CM6749

1969 Camaro Rally Sport; Inner Headlamp Door; LH Drivers Side; Made in the USA!

Reproduction of the inner portion of the headlamp door for 1969 Camaro Rally Sport models. This is the inner structure that the chrome die-cast trim and outer headlamp door attaches to. These doors are manufactured using the...

Product#: C598

1969 Camaro Rally Sport; Headlight Bellcrank; RH Passenger Side

Reproduction of the original bellcrank assembly designed for use with 1969 Camaro Rally Sport models. Bell crank is manufactured in quality stamped steel to factory specifications replicating the original in design,...

Product#: 5638498

1968-69 Camaro; Raly Sport Headlight Vacuum Relay Valve Assembly

Quality reproduction of the original GM headlight relay switch assembly designed for use on 1968-69 Chevrolet Camaro models with Rally Sport (hidden headlight) option. The relay works with the headlight switch on RS models to...

Product#: K448

1968-69 Camaro; Rally Sport Headlamp Pin & Clevis Set

Reproduction of the original pin and clevis set designed for use with 1968-69 Camaro RS models with hidden headlamps. The pin and clevis is required to hold the headlight vacuum actuator to the bracket. This is a high quality...

Product#: 3957029

1969 Camaro, Chevelle, Nova; Headlamp Washer Nozzle Set; 4 Piece Set

Exact reproduction of the original type headlamp washer nozzles designed for use on various 1969 GM models. These special windshield washer spray nozzles were standard equipment for all 1969 Rally Sport Camaros, and optional...

Product#: 4919653

1969 Camaro, Impala, Caprice, Corvette; Headlamp Washer Drip Valve Solenoid

Reproduction of the original headlamp washer drip valve solenoid designed for 1969 Chevrolet Camaro, Impala, Bel Air, and Caprice models. This solenoid works in conjunction with the washer pump and motor. It bolts to the...

Product#: K528

1968-69 Camaro; Rally Sport Headlight Bushing Set; 22 Piece Set

Reproduction of the original bushings needed when rebuilding or adding a Rally Sport grill assembly (concealed headlamps). If your rebuilding a 1968-69 Rally Sport headlamp assembly, then you'll want to replace the upper and...

Product#: 3945711

1969 Camaro Rally Sport; Headlight Hinge; RH or LH; Each

Reproduction of the original Rally Sport headlight hinge designed for use with 1969 Camaro Rally Sport models. Each hinge is manufactured in quality die-cast and unpainted, matching the original in design, appearance, and...

Product#: K7915

1969 Headlamp Bezel Mounting Set

Reproduction headlamp bezel mounting hardware for 1969 Camaro models without the RS option. This hardware set is used to mount the headlamp bezel to the headlamp housing. One set required per vehicle.

Product#: *R5053

1969 Camaro RS; Headlamp System Kit; RH and LH; with Existing RS Headlamps

Complete headlamp restoration kit designed for use on 1969 Camaro Rally Sport models. This comprehensive RS headlight kit includes all the components needed to repair a hidden headlamp package for a 1969 standard Camaro....

Product#: 3958005

1969 Camaro; RS Inner Headlamp Door; Die-Cast Chrome; LH Driver Side

Reproduction of the original chrome inner headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each chrome headlight door is manufactured in zinc alloy die-cast metal and chrome plated to a...

Product#: R2553

1969 Camaro Rally Sport Headlight Hose Set; with Color Hoses; Diagram Included

OER® reproduction of the original vacuum hose set designed for use on 1969 RS Camaro models. This reproduction hose kit is designed and manufactured to exact factory specifications including correct size vacuum hoses and...

Product#: 3958003

1969 Camaro; Rally Sport Outer Headlight Door; Black; Paint to Desired Color; LH Drivers Side

Reproduction of the original outer headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each headlight door is manufactured in quality stamped metal and replicates the original in design...

Product#: 3958004

1969 Camaro; Rally Sport Outer Headlight Door; Black; Paint to Desired Color; RH Passenger Side

Reproduction of the original outer headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each headlight door is manufactured in quality stamped metal and replicates the original in design...

Product#: *R493

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...

Product#: *R492

Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;

Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...

Product#: 5638486

1968-69 Camaro RS Headlamp Vacuum Actuator; with Concealed Headlights; Each

Superb quality reproduction of the original headlamp vacuum canister designed for use on all 1968-69 Camaro models that included concealed headlamps. Each actuator is manufactured to exact factory specifications ensuring a...

Product#: A10165

# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head

Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can be...

Product#: 3958006

1969 Camaro; RS Inner Headlamp Door; Die-Cast Chrome; RH Passenger Side

Reproduction of the original chrome inner headlamp door designed for use on 1969 Camaro Rally Sport models (concealed headlights). Each chrome headlight door is manufactured in zinc alloy die-cast metal and chrome plated to a...

Product#: 3927444

1968-69 Camaro; Rally Sport Firewall Grommet; EPDM Molded Rubber

Reproduction of the original firewall grommet designed for use with 1968-69 Chevrolet Camaro models equipped with the Rally Sport hidden headlight option. Manufactured from high-quality EPDM rubber, this grommet accurately...

Product#: 1300540

1968-69 RS Headlamp Retracting Cover Shaft Washer - Each

Reproduction of the original retracting cover shft washer unit designed for use with 1968-69 headlamp assemblies. This washer is designed to replace the existing unit for any 1969-69 Camaro RS model when rebuilding the...

Product#: 3903451

1967-69 RS Headlight Hinge to Headlight Backing Plate Spacer ; Each

Reproduction of the original retracting cover mounting plate found on 1967-69 Camaro Rally Sport models. This reproduction spacer is manufactured in injection molded ABS offering an authentic appearance and fit. Used as a...

Product#: 3982098

U-Type Extruded Clip Nut, Fits 1/4-20 Bolts, Black Phosphate Coated

Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. This is the correct nut used to install the rear tail lamp to the body. Can be used to install the rear...

Product#: B11067

Torx Oval Head Tapping Screw; Black Oxide on Stainless; M4.2 X 20 TORX 8MM

Correct replacement screw for use with the center dash air outlet and other various parts for vehicles including sill plate, garnish moldings, mud flaps. Applications: 1969 Camaro - center dash outlet 1969-76 Nova - center...

Product#: K89528

Fantastic Plastic Polish; Headlight and Plastic Restorer; Lens Polish; 16 Oz. Pint Bottle

Restores, revitalizes & protects while removing yellow film, cloudy streaks, hairline scratches, haze & halos from clear, smooth plastics. Excellent on headlight covers, taillight lenses, bug deflectors, instrument covers,...