Product#: 1662483

1967-69 Camaro SS; Hood Assembly; Bolt On; Stamped Steel; EDP Coated

Reproduction hood assembly for 1967-69 Chevrolet Camaro Super Sport (350, 396) models. Each hood is manufactured from high-quality stamped steel to original factory specifications, featuring correct body contours and...

Product#: 152681

1967-69 Camaro, Firebird; Rear Trunk Lid; Coupe; with Pre-Punched Spoiler Holes; EDP Coated

Reproduction of the original trunk lid designed for use on all 1967-69 Camaro and Firebird models. Manufactured in OEM gauge stamped steel, this reproduction features the underside structure with pre-cut spoiler mounting...

Product#: K841

1967-69 Camaro; Cowl Top Vent Grill Panel; EDP coated

Reproduction of the original cowl top vent grill panel that was original equipment on 1967-69 Camaro models. This louvered stamped steel component installs directly below the windshield and behind the hood panel. Includes...

Product#: 1660500

1967-69 Camaro; Stinger Hood Assembly; Stamped Steel; with 2" Cowl Rise; EDP Coated

Aftermarket Stinger hood assembly designed for use with any 1967-69 Chevrolet Camaro, most commonly associated with high-performance Yenko, Baldwin Motion, and COPO models. Manufactured from quality stamped steel to original...

Product#: 152849

1967-69 Camaro, Firebird; Complete Floor Pan; For Deep Tubs; with Weld-Thru™ Primer

Reproduction of the original floor pan assembly designed for use with 1967-69 Camaro and Firebird models with deep tubs. Add up to 3 inches of clearance per side with our custom deep tub floor pan assembly for 1967-69 models....

Product#: C9003W

1967-69 Camaro, Firebird; Full Floor Pan Assembly; with Silver Weld-Thru™ Coating

Reproduction of the original complete floor pan assembly designed for use with 1967-1969 Camaro, Firebird, and Trans Am models. Each full floor pan is manufactured in stamped steel to original factory specifications,...

Product#: 7779477

1969 Chevrolet Camaro; Complete Quarter Panel; Coupe; LH Driver Side

Reproduction complete quarter panel for 1969 Camaro coupe models. Each panel is precision-manufactured in high-quality stamped steel to original factory specifications for an authentic fit and finish. Unlike a simple quarter...

Product#: 152850

1969 Camaro, Firebird; Complete Trunk Floor; For Deep Tubs; with Weld-Thru™ Primer

Reproduction of the original trunk floor assembly designed for use with 1969 Camaro and Firebird models with deep tubs. Add up to 3 inches of clearance per side with our custom deep tub trunk pan assembly for 1969 models....

Product#: 1662695

1969 Camaro, Firebird; Complete Door Shell Assembly; LH Drivers Side; EDP Coated

Quality reproduction of the original complete door shell assembly, designed as an accurate replacement for the factory door. Each door shell is manufactured in stamped steel to precise factory specifications with the correct...

Product#: C339

1969 Camaro, Firebird; CompleteTrunk Floor Pan; EDP Coating

Reproduction of the original style complete trunk floor pan designed for use on 1969 Camaro and Firebird models. This trunk floor pan is designed and manufactured to replicate the original in every detail. Manufactured from...

Product#: C1067L

1967-69 Camaro, Firebird; Complete Rocker Panel Assembly; Convertible; LH Driver Side

Stamped steel reproduction of the original complete rocker panel assembly including the inner and outer structure for 1967-69 Camaro and Firebird convertible models. This complete rocker panel features heavy duty...

Product#: 8783521

1967-69 Camaro, Firebird; Rear Trunk Lid; w/o Rear Spoiler Holes; Stamped Steel; EDP Coated

OER Premier reproduction trunk lid is designed specifically for 1967-69 Camaro and Firebird models. Manufactured utilizing all new tooling with OEM gauge steel, this reproduction is the highest quality trunk lid on the market...

Product#: 1662688

1969 Camaro RS; Front Fender; Rally Sport; with Extension; RH Passenger Side

Reproduction of the original front fender designed for use on 1969 Camaro RS models (with concealed headlamp option). This fender is an excellent replacement for your rusted or damaged factory original. Manufactured in high...

Product#: 152727

1969 Camaro, Firebird; Inner Front Door Frame; LH Driver Side; EDP Coated

Reproduction inner door frame for 1969 Camaro and Firebird models. Each frame is manufactured in quality stamped steel to factory specifications featuring correct contours and pre-installed door hinge mounting points. For use...

Product#: C128C

1969 Camaro, Firebird; Firewall Panel; with Heater Delete Option; EDP Coated

Complete reproduction of the original firewall panel assembly designed for use with 1969 Camaro and Firebird models. Each panel is manufactured in stamped steel to original factory specifications and features correct contours...

Product#: 152757

1969 Camaro, Firebird; Inner Cowl Panel Assembly; without Air Conditioning; EDP Coated

Quality reproduction of the original inner cowl panel assembly designed for use with 1969 Camaro and Firebird models. Each cowl panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: C6363

1967-69 Camaro, Firebird; Complete Outer Rocker Panel; Coupe: RH Passenger Side

Reproduction of the original outer rocker panel designed for use with 1967-69 Camaro and Firebird models. The rocker panels install directly below the door between the front and rear wheel well openings. This full outer...

Product#: C107L

1967-69 Camaro, Firebird; Front Floor Pan; Partial; LH Driver Side; EDP Coated

Reproduction of the original front floor pan section for use with 1967-1969 Camaro and Firebird models. Replace the damaged or rusted section of the front floor pan area with this quality stamped steel reproduction. Each...

Product#: C11020A

1968 Camaro, Firebird, 68-74 Nova, Apollo,Omega, Ventura; Top Inner Cowl Panel; without AC; EDP Coated

Reproduction of the original upper inner cowl panel designed for use with 1968-69 Camaro, Firebird models and 1968-74 Chevy II, Nova and GM X-Body models. Each panel is manufactured in stamped steel to original factory...

Product#: C127B

1969 Camaro, Firebird; Complete Firewall Panel; Coupe; with Air Conditioning; EDP Coated

Complete reproduction of the original firewall panel assembly designed for use with 1969 Camaro and Firebird models. Each panel is manufactured in stamped steel to original factory specifications, featuring the correct...

Product#: C2066

1969 Camaro, Firebird; Inner Roof Panel Brace Set; Coupe; 14 Piece; EDP Coated

Correct reproduction of the original inner roof panel braces designed for use with 1969 Camaro and Firebird coupe models. Each brace is manufactured in stamped steel to original factory specifications featuring correct...

Product#: 152852

1968-69 Camaro, Firebird; Frame Rail; for Mini Tubs; RH Passenger Side; Weld-Thru&trade Primer

Add up to 3" inches of clearance per side with our custom deep tub components. Manufactured to replicate the look of the original frame rail assemblies while providing the additional clearance needed for wider tires. These...

Product#: C209R

1969 Camaro, Firebird; Trunk Lower Side Drop Down Panel Extension; RH Passenger Side

Reproduction of the original lower side drop down panel designed for use with 1969 Camaro and Firebird models. Each trunk side panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: CM2519

1969 Camaro, Firebird; Outer Wheel House Panel; RH Passenger Side; EDP Coated

Reproduction outer wheelhouse panel for 1969 Camaro and Firebird models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic appearance and fit. Features...

Product#: K1026

1969 Camaro; Rear Quarter Panel Repair Skin; with Door Jamb Section; RH Passenger Side

Replacement of the original style quarter panel skin designed for 1969 Camaro coupe and convertible models. Each quarter panel skin is precision-stamped from OE-gauge steel and manufactured to original factory specifications...

Product#: 3937529

1969 Chevrolet Camaro; Front Header Panel; EDP Coated

Reproduction of the original front header panel designed for use with 1969 Chevrolet Camaro models. Manufactured from quality stamped steel to correct factory specifications for an exact fit, this header panel is compatible...

Product#: C108R

1967-69 Camaro, Firebird; Rear Floor Pan; Partial; RH Passenger Side; EDP Coated

Reproduction of the original rear floor pan section for use with 1967-1969 Camaro and Firebird models. Replace the damaged or rusted section of the rear floor pan area with this quality stamped steel reproduction. Each...

Product#: 152751

1969 Camaro, Firebird; Inner Lower Cowl Panel; without Air Conditioning

Reproduction of the inner lower cowl panel for 1969 Camaro and Firebird models without air conditioning. Each panel is manufactured in stamped steel to correct factory dimensions and built to replicate the original in...

Product#: C108L

1967-69 Camaro, Firebird; Rear Floor Pan; Partial; LH Driver Side; EDP Coated

Reproduction of the original rear floor pan section for use with 1967-1969 Camaro and Firebird models. Replace the damaged or rusted section of the rear floor pan area with this quality stamped steel reproduction. Each...

Product#: 1667335

1969 Camaro, Firebird; Rear Wheelhouse Assembly; 6" Mini-Tub; EDP Coated; RH Passenger Side

When doing a restomod there is no longer a need to widen the inner and outer wheelhouse panels to form a full rear minitub. You can now purchase our complete rear wheelhouse minitub panels to make the job easier. This quality...

Product#: C113R

1967-69 Camaro, Firebird; Inner Wheel House Panel; RH Passenger Side

Reproduction of the original inner wheelhouse panel designed for use with 1967-69 Camaro and Firebird models. Each wheelhouse panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: 1667332

1969 Camaro, Firebird; Rear Wheelhouse Panel Assembly; Stock Width; LH Driver Side; EDP Coated

Reproduction rear inner and outer wheelhouse assembly for 1969 Camaro and Firebird models. When doing a complete restoration, there is no need to weld together the inner and outer wheelhouse panels to form your full rear...

Product#: 7723787

1969 Camaro, Firebird; Outer Door Panel Skin; RH Passenger Side

Reproduction of the original outer door sheet metal designed for use with 1969 Camaro and Firebird models. Each panel is manufactured in stamped steel to precise factory specifications, ensuring correct contours for an...

Product#: *R6364

1967-69 Camaro, Firebird; Outer Rocker Panels; Coupe; RH & LH; Pair

Reproduction of the outer rocker panels for use on 1967-69 Camaro and Firebird models. The rocker panels are manufactured in stamped steel replicating the original in appearance and fitment. Installs directly below the door...

Product#: *RPM28

1967-69 F-Body Under Rear Seat LH/RH Floor Pans

Product#: *C9000

1967-69 Camaro, Firebird; Floor Pan Set; Front to Rear; RH & LH; Pair; EDP Coated

Reproduction of the original style floor pans designed for use with all 1967-1969 Camaro and Firebird models. Each floor panel is manufactured in stamped steel to correct factory specifications for an authentic fit and...

Product#: C69541R

1967-69 Camaro, Firebird, 68-79 Nova, GM X Body; Outer Cowl Side Panel; RH Passenger Side; Made in the USA!

Replace your rusted or damaged cowl side panel with this quality reproduction. This panel installs behind the fender at the side of the firewall. Made in USA. Features and Benefits: Authentic reproduction cowl side panel...

Product#: K44501

1967-69 Camaro, Firebird; Outer Rocker Panel; Coupe; Slip-on Style; RH Passenger Side

Reproduction of the original style outer rocker panel designed for use with 1967-69 Camaro and Firebird coupe models. Manufactured to correct dimensions in stamped steel, this slip-on style rocker panel replaces the outer...

Product#: C310

1967-69 Camaro, Firebird; Under Floor Main Brace; Convertible; EDP Coated

Quality reproduction of the original under floor main brace for use with 1967-69 Camaro and Firebird convertible models. Each under floor brace is manufactured in stamped steel to original factory specifications featuring...

Product#: K44504

1967-69 Camaro, Firebird; Inner Rocker Panel Assembly; Coupe; with EDP Coating; RH Passenger Side

Stamped steel reproduction of the original inner rocker panel for 1967-69 Camaro and Firebird coupe models. This panel installs under the door behind the outer rocker panel and between the wheel wells. This part features a...

Product#: *K44500

1967-69 Camaro, Firebird; Partial Outer Rocker Panels; Coupe; RH & LH; Pair

Reproduction of the original style outer rocker panels designed for use with 1967-69 Camaro and Firebird coupe models. Manufactured to correct dimensions in stamped steel, this slip-on style rocker panel replaces the outer...

Product#: 1667113

1967-69 Camaro, Firebird; Upper Rear Body Panel; Coupe; w/o Outer Lip; EDP Coated

Correct reproduction upper rear body panel for 1967-69 Camaro and Firebird models. Each rear body panel is manufactured in stamped steel to original factory specifications featuring correct contours for an authentic...

Product#: C113AL

1968-69 Camaro, Firebird; Inner Wheel House Panel; LH Drivers Side

Reproduction of the original inner wheelhouse panel designed for use with 1968-69 Camaro and Firebird models. Each wheelhouse panel is manufactured in stamped steel to original factory specifications featuring correct...

Product#: K44502

1967-69 Camaro, Firebird; Outer Rocker Panel; Coupe; Slip-on Style; LH Driver Side

Reproduction of the original style outer rocker panel designed for use with 1967-69 Camaro and Firebird coupe models. Manufactured to correct dimensions in stamped steel, this slip-on style rocker panel replaces the outer...

Product#: 14285

1967-69 Camaro, Firebird; Bucket Seat Frame Floor Support; LH Drivers Side

Reproduction of the original seat frame floor support designed for 1969 Camaro and Firebird coupe and convertible models. Each panel is manufactured in stamped steel to original factory specifications. Replaces the area under...

Product#: K44701

1967-69 Camaro, Firebird; Partial Inner Rocker Panel; LH Driver Side; EDP Coating

Reproduction of the original inner rocker panel designed for use with 1967-69 Camaro and Firebird coupe models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: E357

1967-69 Camaro, Firebird; Front Pillar Drip Rail Support; Coupe; LH Driver Side

Correct reproduction of the original pillar drip rail support that installs on the front pillar section of the roof panel and extends downward vertically between the roof panel and fender. This reproduction is essential when...

Product#: E356

1967-69 Camaro, Firebird; Front Pillar Drip Rail Support; Coupe; RH Passenger Side

Correct reproduction of the original pillar drip rail support that installs on the front pillar section of the roof panel and extends downward vertically between the roof panel and fender. This reproduction is essential when...

Product#: *E378

1967-69 Camaro, Firebird; Front Pillar Drip Rail Support; Coupe; RH & LH; Pair

Correct reproduction of the original pillar drip rail support designed for use with 1967-1969 Camaro and Firebird coupe models. Each pillar drip support is manufactured in stamped steel to original factory specifications...

Product#: 15008

1967-69 Camaro, Firebird; Underseat Floor Brace / Torque Brace; RH Passenger Side

Reproduction of the original underseat leaf spring bracket brace for use with 1967-69 Camaro and Firebird models. Manufactured in quality stamped steel to OE factory specifications featuring correct mounting locations and...

Product#: C7624W

1969 Camaro, Firebird; Rear Inner Valance Panel; with Silver Weld-Thru Coating

Reproduction of the original rear inner valance panel for use with 1969 Camaro and Firebird models. Each rear inner valance panel is manufactured in stamped steel to original factory specifications featuring correct contours...

Product#: 153837

1967-79 Camaro, Firebird, 69-79 Nova, GM X Body; Outer Cowl Side Panel; LH; Drivers Side; EDP Coated

Reproduction of the original outer cowl panel designed for use with various 1967-79 GM models including 1967-69 Camaro, Firebird, 1968-79 Nova, and GM X-body models. Each panel is manufactured in stamped steel to original...

Product#: C1053L

1967-69 Camaro, Firebird; Under Rear Seat Floor Brace; LH Drivers Side; EDP Coated

Correct reproduction of the original under rear seat brace for use with 1967-1969 Camaro and Firebird models. Each brace is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: KW976L

1969 Camaro, Firebird; Quarter Panel Trunk Opening Corner Stiffener; LH Driver Side; Silver Weld-Thru Coated

Reproduction quarter panel trunk opening corner stiffener for 1969 Camaro and Firebird coupe models. Each trunk opening corner stiffener is manufactured in stamped steel to original factory specifications featuring correct...

Product#: M112

Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"

Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...

Product#: *84L020

Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"

This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually....

Product#: 4808179

1961-69 GM; Floor Pan Metal Plug; Oval; With Weld Holes; With Notches

Reproduction oval floor pan metal plug for various 1961-1969 GM models. This plug installs in the floor pan and trunk floor pan to seal factory oval access openings. Features the correct oval shape with notches and weld holes...

Product#: C2355

1969 Camaro, Firebird; Quarter Panel & Door Frame; Coupe; RH Passenger Side; EDP Coated

Reproduction of the quarter panel and door frame assembly designed for use with 1969 Camaro and Firebird coupe models. Each complete side frame assembly is manufactured in heavy-gauge stamped steel to factory specifications,...

Product#: C2354

1969 Camaro, Firebird; Quarter Panel & Door Frame; Coupe; LH Drivers Side; EDP Coated

Reproduction of the quarter panel and door frame assembly designed for use with 1969 Camaro and Firebird coupe models. Each complete side frame assembly is manufactured in heavy-gauge stamped steel to factory specifications,...

Product#: 1660501

1967-69 Camaro; Hood Assembly; L-88; 3" Cowl Rise; Bolt On; Stamped Steel; EDP Coated

If you're looking for a unique hood, this L-88 style hood is perfect for any Camaro owner seeking an aggressive, racing-inspired appearance. Unlike the common fiberglass versions, this hood is manufactured from high-quality...