Product#: 8610

Flat Washer; 1/2" USS; Zinc Plated

1/2" USS zinc plated Flat Washer for a variety of applications. A washer is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such...

Product#: C2005

1960-81 GM; Body Shim Set; 1/16" Thick, 1-1/4" x 1-1/8"; with 3/8" Bolt Slot; Zinc Plated; 10 Piece Set

Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...

Product#: *K3027

1967-81 Camaro, Firebird, Nova; Subframe Body Mount Hardware Set; Grade 5; Various GM Models

Subframe hardware kit designed for use on various 1967-81 Camaro, Firebird, and 1968-74 Nova, Omega, Apollo, and Ventura models as listed below. Each kit contains all the correct bolts, washers and nuts used to mount the...

Product#: T71220

Hex Bolt; 1/2"-13 x 4" LG; Gd 8; Yellow Dichromate

Hex Bolt; 1/2"-13 x 4" Lg; Gd 8; Yellow Dichromate Application 1973-1980 Chevrolet/GMC Radiator Core Support; STD Cab 1/2 & 3/4 Ton 1973-1980 Chevrolet/GMC Radiator Core Support; Crew Cab 3/4 Ton 1973-1980 Chevrolet/GMC Front...

Product#: *K1551

1955-74 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 3/4"; Black Phosphate; 10 Piece Set

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models. The OER® Authorized logo represents...

Product#: T71224

1/2"-13 Prevailing Torque Lock Nut; Cadmium Plated

1/2"-13 Prevailing Torque Lock Nut; Grade 8; Cadmuim Plated

Product#: A9159

Bolt; 1/2"-13 x 5" Lg Hex Head Cap Screw; Grade 8

1/2"-13 x 5" Hex Head Cap Screw; Grade 8

Product#: 914802

1967-69; Camaro; Firebird; Nova; Subframe Body Mount Cushion; # 2, # 3 Position; Lower Cushion

Reproduction of the original GM sub frame body mount cushion for 1967-1969 Camaro and Firebird and 1968-72 Nova models. Each body mount is produced using correct compression molded S.B.R. that replicates the original in...

Product#: 3784845

1953-74 GM; J-Type Clip Nut; Fits 5/16-18 bolts, Black Phosphate Coated; Each

OER® Authorized reproduction J-nut that was used for the installation of various front end components including front fenders, header panels, hood latches, radiator supports, battery trays and more. Measures 5/16-18...

Product#: K998

1967-69 F-Body & 1968-74 X-Body Subframe Body Plate Set

A complete kit of subframe mounting plates will take care of the rotted out crucial areas where the subframe bushings mount. After years of abuse, the plates may become damaged beyond repair. You certainly don't want to...

Product#: C122

1967-74 Camaro, Firebird, Nova, GM X Body; Subframe Body Mount Cage Nut; Each

Reproduction subframe cage nut for various 1967-74 GM models. This body mount cage nut is manufactured from stamped steel and used to fasten the subframe to the body. Replaces torn, rusted, or damaged mounting points on GM...

Product#: C2004

1960-81 GM; Body Mount Shims; 1/8" Thick, 1-1/4" x 1-1/8"; 3/8" Bolt Slot; Zinc Plated; 10 Piece Set

Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...

Product#: C2001

1961-1981 GM; Body Shims; 15/64"; 10 Piece Set

Shims are very important items when installing and aligning sheet metal. Used to align body panels, these shims are available in various thicknesses to suit most alignment situations. Please check your originals to be sure...

Product#: *K1550

1953-74 GM; J-Type Clip Nut; Fits 5/16-18 bolts, Black Phosphate Coated; 10 Piece Set

OER® Authorized reproduction J-nut that was used for the installation of various front end components including front fenders, header panels, hood latches, radiator supports, battery trays and more. Measures 5/16-18...

Product#: *K1553

1959-74 GM; Bolt, Pointed Tip; with Hex Washer Head, 5/16-18 X 1-1/4"; Black Phosphate; 10 Piece Set

OER® Authorized reproduction of the original hex head bolt for various GM models. This bolt was used for the installation of a number of parts on the front end of various GM models from 1959-1974. This bolt features a...

Product#: *K1552

1958-96 GM; Bolt, Pointed Tip with Hex Washer Head, 5/16-18 x 13/16"; Black Phosphate; 10 Piece Set

OER® Authorized reproduction bolt that was used for the installation of various front end components including front fenders, header panels, hood latches, radiator supports, battery trays and more. The OER® Authorized...

Product#: A17575

Bolt; 1/2"-13 x 3-1/2" Lg Flanged Hex Head Cap Screw; Grade 8; Phosphate

Bolt, 1/2"-13 x 3-1/2" Flanged Hex Head Cap Screw; Grade 8

Product#: A12785

1/2" SAE Flat Washer; Grade 8

1/2" SAE Flat Washer; Grade 8 High Strength; bright zinc Specifications: Bolt Size : 1/2" Inner Diameter : 17/32" Outer Diameter : 1-1/16" Thickness : 0.097-0.121" Finish : Zinc & Gold Dichromate Grade : 8 Material : 1035...

Product#: A5724

1/2" Split Lock Washer; Bright Zinc

1/2" Split Lock Washer

Product#: 34142G

1967-81 GM; Polyurethane Body Mount Bushing Set; Black

Polyurethane bushings are designed to never wear out as conventional bushings do. They are self lubricating, never squeak, are weather resistant and produced using the latest polyurethane materials. Replace your original body...

Product#: 5492

1967-69 Camaro - 1/2" Subframe Bolt

Applications: 1967-69 Camaro {specs}

Product#: 8650

5/8" Lock Washer

Product#: BK678

1967-81 Camaro, Firebird, Nova; Subframe Body Mount Hardware Set; Grade 8; OE Style

Reproduction of the original subframe body mount hardware designed for use with 1967-81 Camaro, Firebird, 1968-74 Nova, Ventura, 1973-74 Apollo, Omega models. Each kit contains all the 4 black oxide bolts, washers, and nuts...

Product#: 34142R

1967-81 GM; Polyurethane Body Mount Bushing Set; Red

Polyurethane bushings are designed to never wear out as conventional bushings do. They are self lubricating, never squeak, are weather resistant and produced using the latest polyurethane materials. Replace your original body...

Product#: D10301

1967-81 GM; Detroit Speed; Stock Height; Solid Body Mount Set

These solid body mounts offer a simple solution for eliminating the chassis flex that occurs between the body and subframe connection and will improve vehicle handling response by increasing chassis rigidity. These mounts...

Product#: LG2001

Billet Aluminum Body Mount Bushing Kit For 1967-1981 Camaro/Firebird, 1968-1979 Nova, Black Anodized Finish

LG Billet USA Billet Body Mount Bushing Kit for 1967-81 Camaro / Firebird models and 1968-79 Nova's. Made from 6061-T6 Billet Aluminum. These body mount bushings have been engineered and manufactured to have OEM-like fitment,...

Product#: 34101G

1967-81 Camaro Black Polyurethane Body Mount Bushing Set without Sleeves or Hardware

Polyurethane bushings are designed to never wear out as conventional bushings do. They are self lubricating, never squeak, are weather resistant and produced using the latest polyurethane materials. Replace your original body...

Product#: C820

1967-69 Camaro 1/2" Drop Interloc Body Bushings (for use with Global West Sub-Frame Connectors)

Designed as a direct replacement for factory bushings. The self-locking, aluminum design eliminates frame to body slippage. Especially recommended if going with sub-frame connectors. Sets include (4) main body bushings and...

Product#: K6816

1967-81 Camaro, 1967-69 Firebird, 1968-74 X-Body Billet Aluminum Body Mount Bushings

These billet machined aluminum subframe bushings will greatly reduce the chassis flex of a subframe car. Recommended for use with weld-in subframe connectors to complete the installation for high performance applications and...

Product#: 94101G

Universal Body Mount (Black)

A true performance application component for cars, trucks, hot rods and racing and competition vehicles ? yet designed to be also used for street vehicles. Soft-running enough to absorb vibrations for street use yet rugged...

Product#: 8612

1967-69 Camaro - 5/8" Small Flat Washer

Applications: 1967-69 Camaro

Product#: 9524

1967-69 Camaro - 5/8" Bolt

Applications: 1967-69 Camaro

Product#: D10201

1967-81 GM; Detroit Speed; 1/2" Height; Solid Body Mount Set

These solid body mounts offer a simple solution for eliminating the chassis flex that occurs between the body and subframe connection and will improve vehicle handling response by increasing chassis rigidity. These mounts...

Product#: K6822

1967-81 F-Body, 1968-74 Nova Urethane Body Bushing Kit

For use in high-performance pro touring/street applications. These urethane body bushings stiffen the chassis yet allow some vibration damping by replacing the rubber OEM bushings. Use to mount OEM or Chassisworks front frame...

Product#: LG2002

Billet Aluminum Body Mount Bushing Kit For 1967-1981 Camaro/Firebird, 1968-1979 Nova, Machined Finish

LG Billet USA Billet Body Mount Bushing Kit for 1967-81 Camaro / Firebird models and 1968-79 Nova's. Made from 6061-T6 Billet Aluminum. These body mount bushings have been engineered and manufactured to have OEM-like fitment,...

Product#: 5263QA

1967-69 Camaro; Firebird; 1968-74 Nova; QA1 Aluminum Interlocking Solid Body Mount Kit; Includes Hardware

QA1's aluminum body mount kit is a significant upgrade over the factory rubber bushings that often get worn out over time. This kit includes anodized aluminum interlocking body mounts that reduce flex and body roll and offer...

Product#: 34184

1967-72 Camaro, 1967-69 Firebird; 1968-1972 Nova; Body Mount Bushing Set; Subframe and Radiator Support; Original Design; 12 Piece Set

Replacing the original body bushings with these reproductions is a surefire way of maintaining originality by mounting the subframe exactly the way the factory intended. These newly tooled original style reproduction body...

Product#: 34143

Subframe Sleeve and Hardware Set

Each set includes the sleeves and hardware for polyurethane body bushings. This set is for customers who would like to order the sleeves and harware separately. M ade in USA Set includes: 4 large center sleeves 2 small center...

Product#: 34101R

1967-81 Camaro Red Polyurethane Body Mount Bushing Set without Sleeves or Hardware

Polyurethane bushings are designed to never wear out as conventional bushings do. They are self lubricating, never squeak, are weather resistant and produced using the latest polyurethane materials. Replace your original body...

Product#: G4951K

1969 Camaro/Firebird; Body Mount Hardware Set; Concours Correct; 20 Pieces

Reproduction subframe to body mount hardware set for 1969 Camaro and Firebird models. This high quality bolt set features the correct size original style fasteners (Grade 5 shaved point Hex) with the correct black phosphate...

Product#: B10180

1967-69 Camaro; Subframe Bolts; Pair

1967-69 Camarosubframe bolts. 5/8"-11 3-1/8". Pair

Product#: A9605

#8 x 1/2"; Teks Self-Drilling; Phillips Pan Head; Zinc-Plated

This #8-18 x 1/2" Phillips pan head Teks self-tapping screw is Zinc plated steel and sold as each. Product Specifications: Teks tapping screw #2 Teks point Phillips pan head Size: 8 x 1/2"

Product#: T71234

Hex Bolt; 1/2"-13 x 7" Long; Grade 5; Zinc Chromate

Hex Bolt; 1/2"-13 x 7" Long; Grade 5; Zinc Chromate Applications 1973-1980 Chevrolet/GMC Rear Cab Mount Bolt; 4WD 1/2 Ton 1973-1980 Chevrolet/GMC Rear Cab Mount Bolt; 2WD & 4WD 3/4 Ton

Product#: 332654

1969-81 Camaro, Firebird, 1970-74 Nova; Body Mount Cushion; Lower; # 2, # 3 Bolt; Each

Reproduction of the original GM sub frame body mount cushion for 1969-81 Camaro/Firebird and 1970-74 Nova/GM X-Body models. Each body mount is produced using correct compression molded S.B.R. that replicates the original in...

Product#: *K3026

1969 Camaro, Firebird, Body Mount Bushing Kit; Subframe and Radiator Support; 12 Piece Set

Reproduction body mount and radiator support bushings for 1969 Camaro, Firebird and Trans Am models. Replacing the original body mount bushings with OER® rubber reproductions is a sure fire way of maintaining originality...

Product#: 928380

1967-72 Camaro; Firebird, 1968-72 Nova/GM X-body, Subframe Body Mount Bushing; # 2 Position; Upper Bushing

Reproduction of the original GM sub frame body mount for 1967-72 Camaro, 1967-72 Firebird and 1968-72 Nova models. Each body mount is produced using correct compression molded S.B.R. with steel sleeve that replicates the...

Product#: 5724

1957-86 GM; 1/2" Bolt Size; Medium Split Lock Washer; 18-8 Stainless Steel; Various Models

1/2" split lock-washer used in a variety of applications including on bumper brackets among many other uses. 1/2" Medium Split Washer 18-8 Stainless Steel. 1/2" ID, 7/8" OD, 0.125 thick. Lock Washer Specifications Finish:...

Product#: C800

Stock Height Interloc Black Body Bushings; For use without Global West Sub-Frame Connectors

Designed as a direct replacement for factory bushings. The self-locking, aluminum design eliminates frame to body slippage. Especially recommended if going with sub-frame connectors. Sets include (4) main body bushings....

Product#: KW696

1967-81 Camaro, Firebird, 1968-74 Nova; Subframe Mount Hole Repair Set; 4 Piece Set

Reproduction of the original style sunframe mount hole plates for use with 1967-81 Camaro, Firebird., 1968-74 Nova, 1971-74 Ventura, and 1973-74 Apollo models. Each plate is manufactured to correct factory specofications in...

Product#: 3549

1/2"-13 UNC Steel Nut

1/2"-13 UNC Steel Nut with silver zinc plating for a wide variety of automotive uses. Specifications Grade: 2 Finish: Zinc chromate Size: 1/2 Thread Type: UNC Coarse (formerly USS) Threads Per Inch: 13 Partial Application...

Product#: 81001000

1967-81 Camaro And Firebird - 1968-74 Nova - Delrin Body Bushing Kit - 6 Bushings

The factory rubber subframe bushings are very compliant, allowing the unibody to flex independent of the front subframe. Polyurethane or aluminum are commonly used to replace the stock rubber, but not without compromise. Poly...

Product#: C809

1969-81 Stock Height Interloc Body Bushings (for use with Global West Sub-Frame Connectors)

Designed as a direct replacement for factory bushings. The self-locking, aluminum design eliminates frame to body slippage. Especially recommended if going with sub-frame connectors. Sets include (4) main body bushings. Made...

Product#: A9400114

1969 Camaro Rally Sport; Outer Headlight Door Hardware Set; 4 Piece Set

Reproduction of the original hardware used to attache the outer headlight door to the inner chrome door for 1969 Camaro Rally Sport models. This screw set is designed to replace the originals exactly. Set of 4 installes RH...

Product#: 893159

1967-81 Camaro, 1967-69 Firebird, 1968-74 Nova, GM X-body, Subframe Body Mount Bushing; Radiator Support; # 1 Position; Upper Cushion

Reproduction of the original GM sub frame body mount cushion for 1967-81 Chevrolet Camaro, 1967-69 Pontiac Firebird, and 1968-74 Chevrolet Nova models. Designed for the #1 position (radiator support, upper cushion), this...

Product#: 4008366

1967-81 Camaro,1967-69 Firebird, 1968-74 Nova, GM X-body, Subframe Body Mount Bushing; Radiator Support; # 1 Position; Lower Bushing

Reproduction of the original GM sub frame body mount for 1967-81 Chevrolet Camaro, 1967-69 Pontiac Firebird, and 1968-74 Chevrolet Nova models. Designed for the #1 position (radiator support, lower bushing), this mount is...

Product#: 901361

1967-72 Camaro; Firebird, 1968-72 Nova/GM X-body, Subframe Body Mount Bushing; # 3 Position; Upper Bushing

Reproduction of the original GM sub frame body mount for 1967-72 Camaro, 1967-72 Firebird and 1968-72 Nova models. Each body mount is produced using correct compression molded S.B.R. with steel sleeve that replicates the...

Product#: AM678110

1967-81 Camaro, 1968-74 Nova Solid Subframe Body Mount Kit with Hardware

This is a solid subframe body mount kit with hardware designed for use with the Art Morrison GT-Sport front clip. This body mount kit will significantly improve handling and chassis rigidity. Made in USA Note: No further...

Product#: C801

1967-81 1/2" Drop Interloc Body Bushings (for use without Global West Sub-Frame Connectors)

Designed as a direct replacement for factory bushings. The self-locking, aluminum design eliminates frame to body slippage. Especially recommended if going with sub-frame connectors. Sets include (4) main body bushings and...

Product#: BX22222

1967-81 Camaro, Firebird; Body Mount Bushing Set; BMR Delrin

Improve handling response by increasing chassis rigidity with a set solid Delrin bushings from BMR. Eliminates flex between the body and subframe. This design offers squeak-free operation and does not corrode like aluminum....

Product#: KW093

1969 Camaro, Firebird; Floor and Trunk Body Plug Set; 12 Piece Set; GM Licensed

Reproduction of the original floor pan plugs for use with floor pans and trunk pans on 1969 Camaro and Firebird models. Each plug is manufactured to replicate the original design including correct numerals and text embossing...