Product#: 11162A

1965-1970 Mustang, Rear Shock Mount Panel; EDP Coated

Reproduction or the rear shock mount panel section designed for use with 1965-70 Mustang models. Each shock panel is manufactured in quality stamped steel to original factory specifications. This panel was only available with...

Product#: 18045L

1960-73 Ford; Various Models; RCD/Bilstein Street Valve Shock Absorber; Rear

RCD / Bilstein rear shock absorber. This high-performance shock is designed to be the best of both worlds for normal street driving or a hard run at the track. Instantly reacts and adjusts for any road condition from smooth...

Product#: *18045R

1964-70 Scott Drake Performance Front and Rear Gas Shock Set

Get improved handling and control for your classic Mustang with Scott Drake performance tuned gas charged shock absorbers. The highly efficient design of these shocks delivers superior consistent performance compared to...

Product#: 821388

1964-70 Ford Ford Mustang; Koni Classic; Front Shock Absorber; Red

Koni Classic front shock absorber for 1964-70 Mustang & 1967-70 Cougar. These dampers are a direct replacement, performance upgrade that will improve ride quality and performance. They are rebound adjustable with vehicle...

Product#: 821389

1964-73 Ford Ford Mustang; Koni Classic; Rear Shock Absorber; Red

Koni Classic rear shock absorber for 1964-73 Mustang. These dampers are a direct replacement, performance upgrade that will improve ride quality and performance. They are rebound adjustable with vehicle specific valving...

Product#: TF500175

Coilover Thrust Bearings

Make changing the ride height on your vehicle simple with a set of thrust bearings. Each set does one pair of coil-over shocks.

Product#: HYP20012250B

Hyperco Coil Over Spring; Barrel-Shaped; 200 lb/in; 12" Tall; 2-1/2" Diameter

Hyperco Coil-Over Spring, Barrel Shaped, 200 lb/in, 12" long, 2-1/2" inside diameter

Product#: 18045C

1960-73 Ford/Mercury; Mustang/Falcon/Cougar; KYB; Gas-A-Just Monotube Rear Shock Absorber

KYB Gas-a-Just gas-charged, non-adjustable rear shock absorber for various 1960-73 Ford and Mercury models including Mustang, Falcon, Cougar, and Comet. The monotube design is a perfromance upgrade for twin-tube equipped...

Product#: 18045P

1964-70 Mustang; Performance Gas-Charged Front Shock; By Scott Drake

Get improved handling and control for your classic Mustang with this Scott Drake performance tuned gas charged shock absorbers. The highly efficient design of these shocks delivers superior consistent performance compared to...

Product#: HYP35012250

Hyperco Coil Over Spring; 350 lb/in; 12" Tall; 2-1/2" Diameter

Hyperco Coil-Over Spring, 350 lb/in, 12" long, 2-1/2" inside diameter

Product#: AR20135DC

AFCO Aluminum Coil-Over Flat Cone Spring mount; Clear

This kit is used to mount a 2 1/2" or 2 5/8" coil-over spring on any AFCO big body threaded aluminum shock. Includes flat spring seat, clip to secure seat to shaft end and threaded adjuster nut for the spring seat on the...

Product#: 18045Q

1964-73 Mustang; Performance Gas-Charged Rear Shock; By Scott Drake

Get improved handling and control for your classic Mustang with Scott Drake performance tuned gas charged shock absorbers. The highly efficient design of these shocks delivers superior consistent performance compared to...

Product#: EB3725

1967-70 Mustang Small Block Eibach Pro-Damper Single Front Shock

Eibach developed Pro-Dampers specifically to complement the unique characteristics of Eibach Pro-Kit and Sportline springs, taking full advantage of the increased spring rate and lower center of gravity. The result is...

Product#: AR20131APRO

AFCO Aluminum Coil-Over Flat Cone Spring mount; Black

AFCO replacement nut for Coil-Over kit.

Product#: 343219

1955-73 Ford; Mustang/Falcon/Ford; KYB Excel-G Shock Absorber; 7.09 Stroke; 17.4 Ext; 10.31 Comp

KYB Excel-G shock absorber for various Ford and GM applications including Mustang, Falcon, Ranchero, and truck. Can be installed on the front or the rear of the vehicle depending on the year, make, and model of the vehicle....

Product#: 31954000

RideTech 1/4" Air Line Fitting

1/4?NPT x 1/4?tube, Used in almost all compressor systems, ARC2000, ARC1500, ARC1600, ARC4000, ARC4000e2, ARC4100e2 Of course our kits come with all the fittings you need, but if you find yourself building your own system, or...

Product#: A3499

5/16"-24 "Keps" Lock Washer & Nut; Zinc Plated

This 5/16"-24 "Keps" lock washer and nut is zinc plated steel and is sold as each. Product Specifications:Keps lock washer and nut Zinc plated steel Thread size: 5/16"-24 Hex width: 1/2"

Product#: 12103001

1967-70 Ford Mustang; Ridetech HQ Shockwave Air Spring Shock Kit; Use with Ridetech Upper Arms; Front

Front HQ Shockwaves for 1967-1970 Mustang. For use with Ridetech upper arms. Includes a pair of rebound adjustable Shockwaves with 1/4" airline fittings and billet adapter.

Product#: 12092401

1964-67 Ford Mustang; Ridetech HQ Shockwave Air Spring Shock Kit; Use with Stock Upper Arms; Front

Front HQ Shockwaves for 1964-1966 Mustang. For use with stock upper arms. Includes a pair of rebound adjustable Shockwaves with 1/4" airline fittings, t-bar and billet adapter.

Product#: 12102401

1967-70 Ford Mustang; Ridetech HQ Shockwave Air Spring Shock Kit; Use with Stock Upper Arms; Front

Front HQ Shockwaves for 1967-1970 Mustang. For use with stock upper arms. Includes a pair of rebound adjustable Shockwaves with 1/4" airline fittings, t-bar and billet adapter.