Product#: PE913

1967-68 Mustang; Tail Lamp Screw Protector Cap Set; 5 Pieces

Reproduction tail lamp screw protector cap set for 1967-68 Mustang and other Ford models. These gray nylon caps cover the screws on the tail lamps inside the trunk area to prevent snagging, scratching or cutting yourself or...

Product#: HK14B

1967-68 Tail Light Lens Screw Set, Stainless (8)

1967-68 Mustang tail lamp lens screws, in stainless steel. Set of 8 correct style chromed stainless steel Phillips drive pan head stop screws to attaches lenses to taillight housing or bucket. Use 4 per lens. Sold in set of...

Product#: *R408

Speed Nut 1/4" Self Thread Cutting - 12 Piece Set

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 12 piece speed nut set is...

Product#: 5962696

1970-73 Camaro; Park Lamp Screw Set ; Standard; 8 piece Set

Reproduction of the original style shouldered lens screw set designed for use on various GM models including 1970-73 Camaros. Each screw is a replication of the original featuring chrome plating for corrosion resistance and...

Product#: C104

1966-69 Nova, 1967-68 Camaro RS; Park Lamp Lens Screw Set; Chrome Plated; 4 Piece Set

Reproduction of the original style shouldered lens park lamp lens screws designed for use with 1967-68 Camaro RS, 1966-69 Nova, and 1968 Impala, Bel Air, Biscayne, Caprice models. Each screw is chrome-plated for corrosion...

Product#: TF900626

Billet Aluminum Dual Filament Tail Lamp Sockets With Boots

These Ron Francis billet aluminum tail lamp sockets with weather protection boots (15" long) are ideal for classic vehicles! Uses a 3/4" mounting hole. Double Filament/staggered pins, typically uses 1157 or 1077 type bulbs.

Product#: TF900625

Billet Aluminum Single Filament Tail Lamp Sockets With Boots

These Ron Francis billet aluminum tail lamp sockets with weather protection boots (15" long) are ideal for classic vehicles! Uses a 3/4" mounting hole. Single filament/straight pins socket and typically uses 1156 or 1015 type...

Product#: B10550

Chrome Plated Stainless Steel Shouldered Lens Screws, #8-32 x 1-5/16" With 15/16" Shoulder, 4 Piece Set

Reproduction shouldered lens screw set, chrome-plated stainless steel for superior corrosion resistance and outstanding appearance. 4 piece set. Replacement lens screws used on various GM vehicles. Available in standard or...

Product#: K5242

Shouldered Lens Screw ; Chrome Plated ; 6 Piece Set ; Turn Signal, Tail Lamp, Side Marker Lens

Reproduction shouldered lens screw set, chrome-plated stainless steel for superior corrosion resistance and outstanding appearance. Replacement lens screws used on various GM vehicles. Most 1965 and later GM vehicles used...

Product#: 9432461

Hex Flanged Stamped Steel Thread Cutting Nut;.88mm Diameter; With Mastic Sealant; Set of 8

Reproduction stamped steel thread cutting nut set for a variety of applications including for use to secure the tail light bezels on 1974-78 Firebird and other models. Can be used anywhere on your car where a 1/4" post...

Product#: *A2896K

Thread Cutting Pal Nut, 3/16" Stud Size, Hex Washer Head, Zinc Plated

Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...

Product#: *A3405K

Thread Cutting Pal Nut, 1/4" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set

Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...

Product#: *R406

Speed Nut 1/4" Self Threading Nut Retainer Set - Set of 6

Speed nuts are a great way of installing parts with studs onto the vehicle. These speed nuts are applied to the stud and pushed into the hole. The part is held in place by the self threading nut. 6 piece speed nut set is...

Product#: K5241

Park Lamp Lens Screw Set ; Chrome ; 4 Piece Set ; Turn Signal, Tail Lamp, Side Marker

Reproduction shouldered lens screw set, chrome-plated stainless steel for superior corrosion resistance and outstanding appearance. Replacement lens screws used on various GM vehicles. Most 1965 and later GM vehicles used...

Product#: P13489ESET

1967 Mustang; Tail Lamp Bezel Set, with Gaskets and Studs; 6 Piece Die-Cast Set

OER reproduction of the original tail lamp bezels, gaskets and studs designed for use on 1967 Mustang models. This popular reproduction is manufactured in die-cast zinc and features a brilliant chrome plated finish with...

Product#: MA2098

Chrome Plated Standard Lens Screws, #8-32 x 13/16", 1969 Dart Park Lamp Lens Screw Set - 4 Piece

Reproduction standard lens screw set, chrome-plated stainless steel for superior corrosion resistance and outstanding appearance. 4 piece set. Reproduction of the 1969 Dart park lamp lens screws. Replacement lens screws used...

Product#: *A10733K

Thread Cutting Pal Nut, 5/16" Stud Size, Hex Washer Head, Zinc Plated, 10 Piece Set

Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...

Product#: 3982098

U-Type Extruded Clip Nut, Fits 1/4-20 Bolts, Black Phosphate Coated

Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. This is the correct nut used to install the rear tail lamp to the body. Can be used to install the rear...

Product#: A10733

Thread Cutting Pal Nut, 5/16" Stud Size, Hex Washer Head, Zinc Plated

Replacement thread cutting pal-nuts used on various GM vehicles. Hex washer head, zinc plated. Mastic sealer washers sold separately. Correct hardware can make any installation job easier. Replace your missing or damaged...

Product#: B12030K

Peri-Keps Hex Nuts 7/16" Hex with 7/8" Toothed Free Spinning Washer, Fits #14 Stud Size, 10 Pieces

Correct replacement self locking Peri-Keps nuts used on various GM tail light housings, 1/4 panel extensions and #14 stud tail lights. 7/16" hex with 7/8" OD toothed washer. 10 piece set. Correct hardware can make any...