Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: 9725B

1964-68 Mustang, Cougar; Accelerator Linkage; V8 with Automatic Transmission

Reproduction of the original accelerator linkage designed for use with 1966-68 V8 Mustangs or 1967-68 V8 Cougar equipped with automatic transmission. This linkage connects your accelerator pedal to the accelerator rod. Mounts...

Product#: 9735A

1964-72 Ford/Mercury; Various Applications; Accelerator Pedal Pad; With Stainless Steel Trim

Reproduction accelerator pedal pad manufactured to exact factory specifications featuring correct ribbing, grip, and polished stainless steel trim. For various 1964-72 models as listed. Replaces Ford part # C5ZZ-9735-D. Ford...

Product#: 9A702

1965-68 Mustang; Accelerator Rod; from Shaft to Bellcrank; 260, 289, 302

Reproduction of the original accelerator rod set designed for use with 1964-67 Mustang models. Each rod is manufactured to factory specifications for proper fitment and function. For use with 260, 289, 302 engines. {fitment}

Product#: LK2201

1964-68 Ford Mustang Lokar Brushed Billet Aluminum Throttle Pedal Assembly with Rubber Inserts

Replace your worn out Mustang hard throttle linkage with Lokar's Mustang Throttle Assembly. Designed as a direct replacement for the stock assembly when paired with Lokar Throttle Cable and Brackets. Made in USA Throw away...

Product#: FM6098

Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Rubber Inserts

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: FM6097

Lokar Eliminator Brushed Billet Aluminum Floor Mount Gas Pedal with Ball Milled Finish

The Eliminator floor-mount gas pedal is precision crafted from billet aluminum and designed to eliminate routing cables through the firewall. Includes an adjustable aluminum splined shaft and stainless steel under-the-floor...

Product#: BG6004

Lokar Black Anodized Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: LK2211B

Black Billet Aluminum Pedal & Arm Assembly For Lokar Drive-By-Wire Throttle Control

Lokar drive-by-wire electronic throttle control pedal assemblies are designed to work with Lokar's drive-by-wire electronic throttle controls. The addition of one of these custom pedals completes the Lokar assembly of the...

Product#: 9760

1964-72 Ford, Mercury; Accelerator Pedal Tension Spring; Various Models

Reproduction accelerator shaft to pedal spring that mounts to the accelerator pedal arm maintaning tension on the pedal. Manufactured from spring steel to ensure proper fit and function. Ford Applications: 1964-1968 Ford...

Product#: DC2083

2 and 4 Bbl Holley Throttle Return Spring Set

Fits Holley 2300 and 2305 2 bbl. or Holley 4150 and 4160 4 bbl. carburetors mounted on any manifold. {fitment}

Product#: GPS6014

Lokar Billet Aluminum 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA

Product#: 9737

1964-68 Ford, Mercury; Accelerator Return Spring; 260, 289, 302, 390, 427, 428CJ; Various Models

Correct replacement for the original accelerator return spring on 1965-68 Mustangs. Closes carburetor throttle plate when accelerator pedal is released. Each spring duplicates the original design and tension ratio making the...

Product#: *9760K

1964-68 Mustang; 1966-68 Falcon, Fairlane, Ranchero; Accelerator Pedal Tension Spring & Screw Kit; Various Models

Reproduction accelerator shaft to pedal spring and screw kit that mounts to the accelerator pedal arm maintaning tension on the pedal. Manufactured from spring steel to ensure proper fit and function. Each kit includes the...

Product#: LK2210B

Lokar Black Anodized Billet Aluminum Drive-By-Wire Electronic Throttle Control Assembly

This Lokar billet aluminum drive-by-wire electronic throttle control assembly is preprogrammed specifically for Ford Coyote 5.0L crate engines and will accept both factory and aftermarket wiring harnesses. Made in USA...

Product#: LK2210

Lokar Bright Anodized Billet Aluminum Drive-By-Wire Electronic Throttle Control Assembly

This Lokar billet aluminum drive-by-wire electronic throttle control assembly is preprogrammed specifically for Ford Coyote 5.0L crate engines and will accept both factory and aftermarket wiring harnesses. Made in USA...

Product#: LK2201B

1964-68 Ford Mustang Lokar Black Billet Aluminum Throttle Pedal with Rubber Inserts

Replace your worn out Mustang hard throttle linkage with Lokar's Mustang Throttle Assembly. Designed as a direct replacement for the stock assembly when paired with Lokar Throttle Cable and Brackets. Made in USA Throw away...

Product#: BAG6004

Lokar Billet Aluminum Throttle Assembly Standard 1-1/2" x 4" Pedal Pad with Rubber Inserts

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: BAG6001

Lokar Billet Aluminum Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and a Ball Milled Finish

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: SG6016

Lokar Chrome Steel Throttle Assembly with Extra Large 2" x 5" Pedal Pad and Rubber Inserts

The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...

Product#: SG6007

Lokar Chrome Steel Throttle Assembly with Standard 1-1/2" x 4" Pedal Pad and Rubber Inserts

The first spring loaded pedals in the industry! This chromed steel throttle assembly is spring loaded like the OE design, and features a removable, splined lower arm for versatile mounting to the right or left of the bracket...

Product#: LK2211

Brushed Billet Aluminum Pedal & Arm Assembly For Lokar Drive-By-Wire Throttle Control

Lokar drive-by-wire electronic throttle control pedal assemblies are designed to work with Lokar's drive-by-wire electronic throttle controls. The addition of one of these custom pedals completes the Lokar assembly of the...

Product#: H2088

Holley; Throttle Cable Bracket

This chrome throttle cable bracket can be used with all 4150 and 4160 model square bore Holley carburetors. It includes dual stainless steel return springs.

Product#: S8520

Barefoot Gas Pedal Pad; Chrome With Black Powder Coated Inlay

Stomp on it in true retro style with this groovy barefoot accelerator pedal cover. This far out pedal cover takes you back to the sixties every time you drive your classic. Chrome cover mounts over your existing accelerator...

Product#: GPS6016

Lokar Brushed Billet Aluminum 1/2" Floor Mount Gas Pedal Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Product#: 9732A

1964-72 Ford, Mercury; Accelerator Pedal Assembly; Billet Aluminum

Machined from solid 6061-T6 billet aluminum with a clear anodized finish, these pedal covers are a great addition to any vehicle. Includes stainless steel mounting hardware. {fitment}

Product#: GPS6015

Lokar Chrome Steel 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing the pedal on vehicles with thick carpet or under carpet padding. Made in USA

Product#: GPS6014B

Lokar Black Anodized Billet Aluminum 3/4" Throttle Assembly Spacer

Pedal floor spacers are recommended when installing on vehicles with thick carpet or carpet padding. Made in USA

Product#: SR4002

Lokar Stainless Steel Throttle Cable Springs

Stainless steel GM designed dual springs for use with Lokars SR4001 bracket (sold separately). Made in USA

Product#: 9725A

1964-68 Ford Mustang; V8; Manual Transmission; Accelerator Linkage

Reproduction accelerator linkage for 1964-68 V8 Mustangs or 1967-68 V8 Cougar equipped with manual transmission. This linkage connects your accelerator pedal to the accelerator rod. It mounts to your firewall and includes the...

Product#: BG6012

Lokar Black Anodized Aluminum Throttle Assembly X-Large 2" x 5" Pedal Pad with Rubber Inserts

Gleaming polish not your style? Then take a look at this stealthy black anodized billet spring-loaded throttle assembly that features a removable lower arm and is splined for versatile mounting to either the right or left...

Product#: *PPK1

1965-67 Ford Mustang; Pedal Pad Kit; With Automatic Transmission and Disc Brakes

Replacing your pedal pads will renew the appearance of your interior while maintaining originality. Accelerator pedal pad is manufactured to exact factory specifications featuring correct ribs and polished trim. Brake pedal...

Product#: 9772A

1966-69 Ford, Mercury; Accelerator Linkage Rod; 6 Cylinder; 170, 200

Correct reproduction accelerator linkage rod for 1966-68 Fairlane, 1968-69 Falcon, 1967-68 Mustang, 1966-67 Ranchero, 1968-69 Torino, and 1966-68 Comet models equipped with 6 cylinder 170, 200 engines. The linkage rod is a...

Product#: BFG6012

Lokar Billet Aluminum Throttle Assembly Xtra Large 2" x 5" Pedal Pad with Rubber Inserts

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: BFG6010

Lokar Billet Aluminum Throttle Assembly with Xtra Large 2" x 5" Pedal Pad and a Ball Milled Finish

This beautifully carved brushed billet aluminum throttle assembly has a spring-loaded pad like the OE design and features a splined removable lower arm for versatility in mounting to the right or left of the bracket. The...

Product#: *PPK3

1965-67 Ford Mustang; Pedal Pad Kit; With Automatic Transmission and Drum Brakes

Replacing your pedal pads will renew the appearance of your interior while maintaining originality. Accelerator pedal pad is manufactured to exact factory specifications featuring correct ribs and polished trim. This kit is...

Product#: 9793AR

1966-70 Ford/Mercury; Accelerator Pedal Rod Firewall Grommet; Various Models

This reproduction accelerator pedal rod seal is an exact replica of the original grommet. Forms a seal around the accelerator rod where the accelerator rod enters the firewall from the passenger compartment. Grommet will seal...

Product#: *PPK2

1965-68 Ford Mustang; Pedal Pad Set; With Manual Transmission and Disc Brakes

Replacing your pedal pads will renew the appearance of your interior while maintaining originality. Our reproduction accelerator pedal pad is manufactured to exact factory specifications including correct ribbing grip and...

Product#: *PPK4

1965-68 Ford Mustang; Pedal Pad Set; With Manual Trans and Drum Brakes

Replacing your pedal pads will renew the appearance of your interior while maintaining originality. Manufactured to exact factory specifications featuring correct ribs. Accelerator pad features polished trim piece. This set...

Product#: SG6017

Lokar Chrome Steel Extra Large 3-3/4" x 2-3/4" Brake Pedal Pad with Rubber Inserts

Chromed steel brake pedal pad is designed with a 1/2"-20 thread and includes a 1/2"-20 stud in kit for mounting. Made in USA

Product#: 9A702E

1964-67 Mustang; V8-2V; Accelerator Rod/Linkage Kit

Reproduction of the original 1964-67 Mustang accelerator rod with hardware. This accelerator rod kit is designed to fit 1965-67 289 2V Mustangs. Kits includes accelerator linkage rod, bushings, clip kit, and return spring.

Product#: 66180

Chrome Carburetor Return Spring Bracket; Universal

This chrome universal carb return bracket is designed to replace the original bracket for most carburetors. Adds a high performance touch to any carburetor. {fitment}

Product#: HK801

1964-72 Ford/Mercury; Accelerator Pedal Mounting Screw; Various Applications

Reproduction accelerator pedal mounting screw or 1964-72 Ford & Mercury models. The screw is manufactured to original specifications to replace the original exactly. 1 required per vehicle. Ford Applications: 1964-68 Mustang...

Product#: 9793A

1966-70 Ford, Mercury: Accelerator Pedal Rod Seal; Various Models

Reproduction accelerator pedal to firewall seal. Replacing the old or weathered original will help ensure that the seal between the acccelerator pedal and the firewall is secure. Manufactured in OE style material for quality...