Product#: FT8001C

1964-1968 Ford Mustang, 1967-1968 Mercury Cougar; Fuel Tank; with Drain Plug; Stainless Steel; F28A; 16 Gallon Capacity;

Correct reproduction of the original fuel tank designed for with 1964-1968 Ford Mustang, and 1967-1968 Cougar models. This reproduction fuel tank is manufactured in stainless steel replicating the original GM tank offering...

Product#: 9275A

1960-68 Mustang, Falcon, Comet; Fuel Tank Sending Unit; w/o Low Fuel Warning; 3/8" Pipe; Zinc Plated

The most accurate reproduction fuel tank sending unit in the industry. Features the original design including a brass float, O ring, and filter that replicate the original in appearance and functionality. This unit monitors...

Product#: AL124

Accelerator Throttle Rod; Universal Fit

Universal style accelerator throttle rod for various GM, Ford, Chrysler, Dodge, Plymouth models. This accelerator rod is for use when modifications will not allow the use of the original rod between the accelerator pedal...

Product#: *GTK3

1967-68 Ford Mustang; Niterne Gas Tank Kit; With 5/16" Fuel Sending Unit; Without Drain Plug

OER Authorized niterne steel reproduction gas tank kit comes with fuel tank, sending unit retaining lock ring and o-ring gasket, fuel sending unit, fuel filler neck, filler neck hose, hose clamps, filler neck screws, tank...

Product#: FT8002B

1964-68 Mustang, Cougar; NiTerne Coated Fuel Tank; w/o Drain Plug; OER; F28E; 16 Gallon Capacity

OER Authorized reproduction of the original style fuel tank designed for use with 1964-68 Mustang, and 1967-68 Cougar models. Each fuel tank is manufactured in quality stamped steel featuring a Niterne coating for superior...

Product#: C67808

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 39" Long; For 1" Wide Straps

Universal style anti squeak cushions are designed to install between the gas tank and the gas tank straps. These fuel tank anti squeek pads cushion the gas tank from the body and straps to reduce noise caused by metal to...

Product#: FT8002A

1964-68 Mustang, Cougar; Zinc Coated Fuel Tank; 16 Gallon; w/o Drain Plug; OER; F28E

OER Authorized reproduction of the original style fuel tank designed for use with 1964-68 Mustang, and 1967-68 Cougar models. Each tank is manufactured in quality stamped steel featuring a Zinc coating for rust and corrosion...

Product#: 9275AB

1964-68 Ford Mustang; Fuel Tank Sending Unit; without Low Fuel Warning; 5/16"

Reproduction fuel tank sending unit for 1964-68 Ford Mustangs and other various models. The most accurate reproduction fuel tank sending unit in the industry, with original design brass float and filter. This unit monitors...

Product#: 9725B

1964-68 Mustang, Cougar; Accelerator Linkage; V8 with Automatic Transmission

Reproduction of the original accelerator linkage designed for use with 1966-68 V8 Mustangs or 1967-68 V8 Cougar equipped with automatic transmission. This linkage connects your accelerator pedal to the accelerator rod. Mounts...

Product#: 9202A

1948-86 Ford; Fuel Tank Sending Unit Brass Float; Various Models

Reproduction of the original style and correct brass float for use with various 1948-86 Ford and Mercury models as listed below. This sending unit brass float is desirable for its long-lasting dependability as it lasts much...

Product#: CX5042

1965-97 GM; Fuel Tank Sending Unit; 0-90 Ohm; Universal Fit; For 6" to 24" Deep Fuel Tanks; Without Pick-Up Tube

Universal fuel tank sending unit for various 1965-97 Chevrolet and GMC trucks with custom tank under the bed and other GM models 1965 and later, that require a 90 ohm sender. Designed for use with OE or aftermarket 0-90 ohm...

Product#: 9034BR

1967-68 Ford Mustang; Fuel Tank Filler Neck

Reproduction fuel filler neck for 1967-68 Mustang. This filler neck is manufactured to factory specifications and replaces the original exacty. Will mount to the tail light panel and connects the filler hose to the fuel tank....

Product#: 153665B

Throttle Cable 36"" Cut-To-Fit; Stainless Steel; Black

This throttle cable is designed with a specially extruded liner to extend the life of the cable. Cables are equipped with aluminum fittings and aluminum ferrule to eliminate fraying. Clevis is designed to eliminate cotter...

Product#: 9047E

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 15" Length

Reproduction fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 15" fuel hose to your...

Product#: 9047G

Fuel Filler Hose; Nitrile 70 Shore Rubber; 2" ID x 20" Length

Fuel filler hose to connect fuel neck to fuel tank on a variety of models requiring a 2" ID fuel hose. This hose can be used as is, or if you require a shorter piece, you can cut this 20" fuel hose to your desired length....

Product#: TF700512

Spring Steel Rod Clip, Fits 1/4" Rod Diameter, RH, 17/64" ID.

Correct style rod clip used on various GM vehicles. Fits 1/4" rod diameter, RH, 17/64" ID. These reproduction transmission linkage rod clips need to be replaced when replacing your linkage rods. 1955-57 Chevrolet Transmission...

Product#: 14048

1958-88 Holley Carburetor Fuel Bowl Screw; 2-1/2"

Reproduction 2-1/2" flat blade carburetor fuel bowl screw for Holley carburetors. This special screw is specifically designed in the correct original configuration and head design for the early model Holley carburetors. Many...

Product#: K915

Universal Fuel Tank Anti Squeak Rubber Set; Various Models: 24" Long; For 1" Wide Straps

Reproduction fuel tank anti squeek set for vehicle models. Includes one 5-1/4" x 2" x 1/2" precision die cut neoprene tank to floor cushion, two 24" x 1-1/4" molded rubber strap to tank cushions, and two 24" x 2 " x.060" flat...

Product#: FT8002C

1964-68 Mustang, 1967-68 Cougar; Fuel Tank; 16 Gallon; Stainless Steel; w/o Drain Plug; F28E

Specifications Superior Corrosion Resistance Polished Stainless Steel Tank Size: 16 Gallon (61 Liter) Lock Ring and O-ring Gasket Kit Included Fuel Sender Not Included (Sold Separately) Filler Neck Not Included (Sold...

Product#: *GTK4C

1967-68 Ford Mustang; Gas Tank Kit; 22 Gallon Conversion, Niterne; 3/8" Fuel Sender; With Drain Plug

Our 22 Gallon Niterne steel Fuel Tank Conversion Kit comes with everything you need to upgrade from the 16 gallon fuel tank in your 1967-68 Mustang, to a larger capacity 22 gallon fuel tank. Each 22 gallon gas tank conversion...

Product#: *GTK4

1967-68 Ford Mustang; Niterne Gas Tank Kit; With 5/16" Fuel Sending Unit; With Drain Plug

OER Authorized niterne steel reproduction gas tank kit comes with fuel tank, sending unit retaining lock ring and o-ring gasket, fuel sending unit, fuel filler neck, filler neck hose, hose clamps, filler neck screws, tank...

Product#: FT8001B

1964-68 Mustang, Cougar; NiTerne Coated Fuel Tank; 16 Gallon; with Drain Plug; F28A

OER Authorized reproduction of the original style fuel tank designed for use with 1964-68 Mustang, and 1967-68 Cougar models. Each tank is manufactured in quality stamped steel featuring a NiTerne coating for rust and...

Product#: FT8001A

1964-68 Mustang, Cougar; Zinc Plated Fuel Tank; 16 Gallon; with Drain Plug; F28A

OER Authorized reproduction of the original style fuel tank designed for use with 1964-68 Mustang, and 1967-68 Cougar models. Each tank is manufactured in quality stamped steel featuring a galvanized zinc coating for rust and...

Product#: T76063

Billet Aluminum; Fuel Filler Neck; with Pop-Up Gas Cap

Billet aluminum flush mount fuel filler neck with pop-up gas cap is the perfect addition to your classic car or truck when adding a non-stock fuel filler location or relocating your fuel tank. Features a super sanitary and...

Product#: 9047A

1967-70 Ford Mustang; Rubber Filler Neck Hose; Fuel Tank to Filler Pipe; 4-7/8" Long; 2-3/16" id

Reproduction fuel filler hose that seals the inlet filler neck to the fuel tank stub neck. This hose will eliminate gas fumes from entering in the interior or trunk area when properly installed. Produced with correct high...

Product#: HK238-CM

1965-73 Ford Mustang; Screw Set; Gas Tank Mounting; 13 Piece Set

This 13 piece set contains all the mounting hardware needed to install your gas fuel tank. Each piece is factory correct. Screws and bolts are all fabricated from heavy-duty steel and coated to prevent any corrosion. Ford...

Product#: HK208

1964-70 Ford/Mercury; Wire Clamps; For Fuel Filler Neck Hose

Reproduction wire-style fuel tank filler neck clamps for 1964-70 Mustang, 1967-70 Cougar and 1966-70 Fairlane models. If your hose is loose, the filler neck clamps could be worn out and require replacing. These clamps are...

Product#: 9735A

1964-72 Ford/Mercury; Various Applications; Accelerator Pedal Pad; With Stainless Steel Trim

Reproduction accelerator pedal pad manufactured to exact factory specifications featuring correct ribbing, grip, and polished stainless steel trim. For various 1964-72 models as listed. Replaces Ford part # C5ZZ-9735-D. Ford...

Product#: 1256633

1955-79 Air Cleaner to Carb Gasket; 5-1/8".060" Thick; Various Models; Universal Fit

Reproduction air cleaner to carburetor gasket manufactured for use with any 2 bbl or 4 bbl carburator with a 5-1/8" base. Can be used with any small or big block engine. Fits most 1964 and newer Ford applications, most 1965...

Product#: P9275A

1960-68 Mustang, Falcon, Comet; Fuel Tank Sending Unit; without Low Fuel Warning; 3/8" Pipe; Stainless

Stainless steel reproduction of the fuel tank sending unit featuring the original design with a brass float, O-ring, and filter that replicate the original in appearance and functionality. This unit monitors the fuel level in...

Product#: TK0120

Fuel Tank Sending Unit; 5 Hole; Early Ford, AMC, and Mopar; 73-10 Ohm

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: TK0121

Fuel Tank Sending Unit; 5 Hole; "Universal" 240-33 Ohm; For Many Aftermarket Gauges

Our universal fuel tank senders mount with five mounting screws. They work on fuel tanks from 6 to 24 inches deep by cutting to length using the instructions included. Since fuel tank senders only read resistance to ground...

Product#: HK21

1964-69 Ford Mustang; Hex Head Screw Set; For Fuel Filler Neck; 5 Piece Set

Reproduction fuel filler neck screw kit. Each 5 piece screw kit includes the hex head screws that are required to mount the fuel filler neck to the tail lamp panel on 1964-69 Mustang models. #10 x 1/2" Lg Tapping Screw with...

Product#: 9276B

1960-97 Ford, Mercury; Fuel Tank Sending Unit O-Ring; Various Models

Our synthetic rubber fuel sending unit oring gasket seal is produced to be resistant to heat, oil and chemicals. Features superb elasticity and bonding capabilities to ensure that it will not lose its shape over time. Will...

Product#: 9276A

1960-97 Ford, Mercury; Fuel Tank Sending Unit Retaining Lock Ring; Three Tab Style

Reproduction fuel sending unit retaining lock ring for various 1960-97 Ford & Mercury models. Each ring is manufactured in quality stamped steel for an original fit. Twists into place in the fuel tank to secure the sending...

Product#: 9A702

1965-68 Mustang; Accelerator Rod; from Shaft to Bellcrank; 260, 289, 302

Reproduction of the original accelerator rod set designed for use with 1964-67 Mustang models. Each rod is manufactured to factory specifications for proper fitment and function. For use with 260, 289, 302 engines. {fitment}

Product#: 14305

Carburetor Fuel Bowl Screws; Set of 8; For Holley Carburetors

Reproduction set of 2-1/2" slotted head carburetor fuel bowl screws for Holley carburetors. These special screws are designed in the correct original configuration with the proper head design for the early model Holley...

Product#: 153350

Hex Washer Head Bolt; Type F Thread Cutting; 3/8-16" x 1 3/4"; Each

Reproduction zinc chromate fuel tank strap bolt for various models including 1974-81 Camaro and Firebird models. This bolt is designed to replicate the original design for an authentic appearance. Measures 3/8-16" x 1 3/4"...

Product#: 1308EDL

Edelbrock VRS-4150 850 CFM Performance Carburetor #1308; Mechanical Secondary; Aluminum; Natural Finish

Edelbrock VRS-4150 race & performance 850 CFM carburetor is street friendly but race ready. The 3.75"-tall cast aluminum main body fits all 4150 and 4500 carb flange manifolds without requiring an adapter plate. Multiple...

Product#: 1307EDL

Edelbrock VRS-4150 750 CFM Performance Carburetor #1307; Mechanical Secondary; Aluminum; Natural Finish

Edelbrock VRS-4150 race & performance 750 CFM carburetor is street friendly but race ready. The 3.75"-tall cast aluminum main body fits all 4150 and 4500 carb flange manifolds without requiring an adapter plate. Multiple...

Product#: 1306EDL

Edelbrock VRS-4150 650 CFM Performance Carburetor #1306; Mechanical Secondary; Aluminum; Natural Finish

Edelbrock VRS-4150 race & performance 650 CFM carburetor is street friendly but race ready. The 3.75"-tall cast aluminum main body fits all 4150 and 4500 carb flange manifolds without requiring an adapter plate. Multiple...

Product#: E1403

Edelbrock; Square Bore; 500 CFM; Non EGR Performer Series Carburetor; With Electric Choke

Performer Series carburetors complete the Edelbrock Power Package System for a smooth running and great performing "no guesswork" parts combination. Edelbrock carbs put the fun back into your driving because of their unique...

Product#: H80457

Holley; Street Warrior; 4160 Series 600 CFM 4 Bbl Carburetor; With Vacuum Secondary And Electric Choke

The Street Warrior uses the latest technology and quality products that Holley is known for. Constructed from aluminum and calibrated to run great right out of the box. The Street Warrior is a great replacement carburetor for...

Product#: E1406

Edelbrock Square Bore 600 CFM Performer Series Carburetor with Electric Choke

Performer Series carburetors complete the Edelbrock Power Package System for a smooth running and great performing "no guesswork" parts combination. Edelbrock carbs put the fun back into your driving because of their unique...

Product#: E1405

Edelbrock Square Bore 600 CFM Performer Series Carburetor with Manual Choke

Performer Series carburetors complete the Edelbrock Power Package System for a smooth running and great performing "no guesswork" parts combination. Edelbrock carbs put the fun back into your driving because of their unique...

Product#: H128011

Holley; 97 GPH; Red; Electric Fuel Pump

This externally mounted Holley electric fuel pump features the proven rotor and vane design. Features: Tumble polished billet look New lower housing casting for enhanced fuel flow and quieter operation Maximum pressure is 7...

Product#: E8123

Edelbrock Fuel Line Kit - Braided Stainless Steel

High-quality Edelbrock small block Chevrolet fuel line kits offer a clean and precise fuel supply line for mechanical fuel pumps with 3/8" NPT outlet when using Edelbrock™ Single-Feed or Dual-Feed fuel inlet kits. Each...

Product#: TC10024A

Lokar 24"" Universal Stainless Throttle Cable with Stainless Steel Housing - Carbureted

This Lokar Hi-Tech "U-Cut-to-Fit" outer housing with a "U-Cut-to-Fit" stainless inner wire throttle cable is designed with a specially extruded liner for extended service life and innovative clevis cable ends to eliminate the...

Product#: H550619N

2011-12 Ford; Coyote; Holley; EFI; HP ECU, TI-VCT & Harness Kit; W/ EV6 Connectors & NTK O2 Sensor

Introducing Coyote Twin Independent Variable Cam Timing Control from Holley EFI! Do you have a coyote crate engine going in your dream car? Is your weekend road race warrior powered by a coyote junkyard engine with locked...

Product#: H550616N

1999-04 Mustang; 4.6L 2V; Holley; EFI; HP ECU & Harness Kit; W/ Bosch Connectors & NTK O2 Sensor

Looking for a plug and play kit for your Ford Modular engine? The HP ECU allows you to accurately control the fuel and ignition of your engine plus much more! Is your cam too wild for a MAF? Power adders? You name it, and...

Product#: H550619

2011-12 Ford; Coyote; Holley; EFI; HP ECU, TI-VCT & Harness Kit; W/ EV6 Connectors & Bosch O2 Sensor

Introducing Coyote Twin Independent Variable Cam Timing Control from Holley EFI! Do you have a coyote crate engine going in your dream car? Is your weekend road race warrior powered by a coyote junkyard engine with locked...

Product#: H550628N

2011-17 Ford; Coyote; Holley; EFI; HP ECU & Harness Kit; W/ EV6 Connectors & NTK O2 Sensor

Introducing Coyote Twin Independent Variable Cam Timing Control from Holley EFI! Do you have a coyote crate engine going in your dream car? Is your weekend road race warrior powered by a coyote junkyard engine with locked...

Product#: H550606N

Holley; HP EFI; ECU And Harness Kit; With NTK O2 Sensors; Ford TFI

Looking for a alternative for your stock or built late model factory FORD EFI engine? How about a replacement ECU for your older Holley C950? Holley has you covered. HP EFI ECU and harness kits are designed to be used with...

Product#: FF36310

FiTech; Go EFI 3x2 Tri Power EFI System; w/ Go Fuel Returnless In-Tank Module; Master Kit; 600 HP; Classic Gold Finish

FiTech Go EFI Classic 3x2 Tri-Power fuel injection system. No special manifold needed for the retro-style 3×2 Go EFI system. It will bolt onto most 6-pack manifolds and is compatible with factory air intake systems. This...

Product#: FF37003

FiTech; Retro LS Port EFI System; w/ LS3 Intake; Basic Kit w/o Fuel Pump; 750 HP; Classic Gold Finish

FiTech Fuel Injection Retro LS EFI system. The Retro LS EFI 650hp fuel injection system offers transmission control and are suitable for everything from your junkyard 5.3 to a Stroker 427. They deliver old-school carburetor...

Product#: FF37002

FiTech; Retro LS Port EFI System; w/ LS3 Intake; Basic Kit w/o Fuel Pump; 750 HP; Matte Black Finish

FiTech Fuel Injection Retro LS EFI system. The Retro LS EFI 650hp fuel injection system offers transmission control and are suitable for everything from your junkyard 5.3 to a Stroker 427. They deliver old-school carburetor...

Product#: H550628

2011-17 Ford; Coyote; Holley; EFI; HP ECU & Harness Kit; W/ EV6 Connectors & Bosch O2 Sensor

Introducing Coyote Twin Independent Variable Cam Timing Control from Holley EFI! Do you have a coyote crate engine going in your dream car? Is your weekend road race warrior powered by a coyote junkyard engine with locked...

Product#: FF93961

FiTech; Go EFI 3x2 Tri Power EFI System; Basic Kit w/o Fuel Pump; Go Spark CDI Box; 800 HP; Classic Gold Finish

FiTech Go EFI Classic 3x2 Tri-Power fuel injection system. No special manifold needed for the retro-style 3×2 Go EFI system. It will bolt onto most 6-pack manifolds and is compatible with factory air intake systems. This...

Product#: FF36332

FiTech; Ultra Ram EFI System; w/ Go Fuel Returnless In-Tank Module; Master Kit; Chevy Big Block Rectangle Port; 800 HP; Matte Black Finish

FiTech Fuel Injection Ultra Ram SBC EFI self-tuning induction system designed for the do-it-yourself hot rodder to the professional EFI tuner! This system is ready to go with everything you need to convert your carbureted...

Product#: FF39610

FiTech; Go EFI 3x2 Tri Power EFI System; Basic Kit w/o Fuel Pump; 600 HP; Classic Gold Finish

FiTech Go EFI Classic 3x2 Tri-Power fuel injection system. No special manifold needed for the retro-style 3×2 Go EFI system. It will bolt onto most 6-pack manifolds and is compatible with factory air intake systems. This...