Product#: MD2108

1966-76 Ford/Dodge/Plymouth; Molding Clip; For Windshield / Rear Window Upper Reveal Molding; Each

Factory-style replacement windshield and rear window upper reveal molding clip for various vehicles. This steel clip measures 3/4" x 11/16". Sold individually. Specifications: Applications: Windshield or Rear Window Molding...

Product#: 51700A

1967-68 Ford Mustang; Fastback; Metal Roof Drip Rail; Pair; EDP Coated

One of the most common rust areas on early Mustangs was the metal roof drip rail. We offer these exact reproductions manufactured in stamped steel to orioginal factory dimensions. Now you can replace the original damaged, or...

Product#: MN2103

Molding Screw Set; Phillips Head; 8-18 x 3/8"; 9/32" Diameter Washer Head; Silver Zinc; 40 Piece Set

Reproduction wheel opening molding screws for most 1960-76 Chrysler, Dodge and Plymouth models. Screws are manufactured to replicate the original and feature a 9/32" diameter phillips washer head design. Complete set will...

Product#: *10176CD

1967-68 Mustang; Rocker Panel Moldings; with Hardware; RH and LH; Pair

Reproduction of the original rocker panel moldings designed for use on 1967-68 Mustangs. Each molding is manufactured in aluminum to exact factory specifications offering a perfect fit and original appearance. Installs along...

Product#: *HK400

1968-76 Dodge/Plymouth/1964-68 Ford; Windshield Push On Molding Clip Kit; 24 Pieces

Reproduction windshield molding clips for a variety of classic American car models including, but not limited to 1968-76 Dodge, Plymouth A, B, E-Body models and 1964-68 Ford Mustang coupe and fastback models. These clips are...

Product#: A5196

Barrel Nut, Fits 1/4" Emblem Stud, Fits 9/32" Hole, Spring Steel, Black Phosphate Coated

Replacement barrel nuts used on various GM or Ford vehicles. The barrel nut is a push on style versus the original thread cutting pal nut, which will not require the removal of body panels for emblem installation. Simply...

Product#: 378362S

1948-up Ford; Emblem Barrel Clips; For 3/32 inch Stud; Fits 1/8 inch Hole Diameter; 5-Pack

Don't attach that beautiful emblem with sloppy fasteners. Secure emblems and nameplates tight with the right Clip. Replaces those old factory clips that have either broken over multiple emblem replacements or have just plain...

Product#: 355785S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips; For 3/16 inch Stud; Fits 7/32 inch Hole Diameter; 5-Pack

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 353577S

1948-UP Ford Car, Pickup Truck; Emblem Barrel Clips

Secure emblems and nameplates tight with the correct clip. Replace those old factory clips that have either broken over multiple emblem replacements or have just plain disappeared. Convenient and easy means of attachment when...

Product#: 24171

# 8-18 X 3/8 Phillips Head Sealing Screw; # 9 Head; For Wheel Opening Moldings and Window Reveal Molding Clip; With Bi-Wax Tip

Reproduction phillips head screw for attaching the wheel openig moldings and various reveal molding clips to the window channel of the vehicle. Each screw comes with a wax sealant at the tip of the screw to seal the hole from...

Product#: 42430E

1967-68 Mustang; Rear Window Molding Set; Fastback; 6 Piece Set

Reproduction rear window molding set that surround the rear glass on 1967-68 Mustang Fastback models. Each molding is manufactured in quality stamped aluminum offering a bright OE appearance. These stainless steel moldings...

Product#: 29164A

1967-68 Mustang; Rear Wheel Opening Molding; RH Passenger Side

Correct reproduction of the original rear wheel opening molding designed for use with 1967-68 Mustang. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the original configuration and fits the...

Product#: 29164B

1967-68 Mustang; Rear Wheel Opening Molding; LH Drivers Side

Correct reproduction of the original rear wheel opening molding designed for use with 1967-68 Mustang. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the original configuration and fits the...

Product#: 42512B

1967-68 Ford Mustang; Fastback; Center Trunk Lid Molding

Reproduction of the original style rear trunk lid moldings for use with 1967-68 Mustang Fastback models. Molding is manufactured to correct factpry specifications for an original appearance and fit. NOTE: Luggage compartment...

Product#: 16038A

1967-68 Ford Mustang; Front Wheel Opening Molding; RH

Correct reproduction of the original rear wheel opening molding designed for use with 1967-68 Mustang coupe and convertible models. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the...

Product#: 16038B

1967-68 Ford Mustang; Front Wheel Opening Molding; LH

Correct reproduction of the original rear wheel opening molding designed for use with 1967-68 Mustang coupe and convertible models. Each wheel opening molding is manufactured in roll-formed aluminum and replicates the...

Product#: HK502

1964-68 Mustang Coupe; Rear Window Molding Clip Kit; 19-Pieces

When replacing the rear window moldings it is a good idea to replace the clips. These are reproduction clips used to attach the rear window moldings on 1964-66 Mustang coupe models. {specs} {fitment}

Product#: 10182H

1967-68 Mustang; Rocker Panel Molding Clip Set; LH Driver Side

Reproduction of the original hardware used to install the rocker panel moldings on 1967-68 Mustangs. Correct replacement plastic clip set used to install 1967-68 rocker moldings for LH driver side. This set includes clips and...

Product#: HK402

1966-68 Mustang Convertible 24 Piece Windshield Molding Clip Kit

When replacing the windshield moldings it's a good idea to replace the clips. This is a reproduction set of the original clips and screws used to attach the front windshield moldings on 1966-68 Convertible models. Includes 14...

Product#: A8448

1962-71 GM; Front & Rear Door Molding Fastener, Clip; 1" Long, White Nylon; Requires #8 Tapping Screw; Each

These universal front lower and rear lower door molding fasteners can be used for various GM applications. Mostly used in the early to mid 1960"s models including rear tailgate moldings for station wagons, as well as lower...