Product#: M107AL

1964-70 Ford Mustang; Front To Rear Full Floor Pan Section; Coupe/Fastback; LH

Reproduction of the original Mustang front to rear floor pan section for use with 1964-70 Mustangs. Covers area from 21" behind front seat to just past the area where the floor angles up to meet the firewall. Features all...


Product#: M108L

1964-68 Mustang; Rear Half Floor Section Panel; Drivers Side

Reproduction of the original 1964-68 Mustang complete rear half floor section for LH drivers side side for convertible models. Located behind front seat. Original contour extends under lip of rear seat belt mounting on...


Product#: M107L

1964-70 Mustang; Front Floor Pan; LH Drivers Side; EDP Coated

Reproduction of the original front floor panel for use with 1964-70 Mustang models. Located under and forward of front seat, extending about 5" up toward firewall. This floor panel is cosmetically correct for 1964-1968...


Product#: M126L

1965-70 Ford Mustang; Front Floor Pan To Firewall Extension; LH

This panel extends to the firewall up from where the floor pan ends. Connects the front of your floor pan to the bottom of the firewall. This is the floor extension for 1965-70 Mustang and 1967-70 Cougar models. Applications...


Product#: M107R

1964-70 Mustang; Front Floor Pan; RH Passenger; EDP Coated

Reproduction of the original front floor panel for use with 1964-70 Mustang models. Located under and forward of front seat, extending about 5" up toward firewall. This floor panel is cosmetically correct for 1964-1968...


Product#: FM110208

1967-69 Mustang; With Dual Exhaust; 6 Piece; Floor Pan Reinforcement Plate Set

This floor pan reinforcement plate set is made specifically for the rear floor pan on 1965 Ford Mustang with dual exhaust. These reinforcement plates are made of stainless steel for strength and added support for the factory...


Product#: M126R

1965-70 Ford Mustang; Front Floor Pan To Firewall Extension; RH

This panel extends to the firewall up from where the floor pan ends. Connects the front of your floor pan to the bottom of the firewall. This is the floor extension for 1965-70 Mustang and 1967-70 Cougar models. Applications...


Product#: FM110213

1967-69 Mustang; Floor Pan Reinforcement Plate; Left

This Floor Pan Reinforcement Plate is made specifically for the 1967-69 Ford Mustang left (driver side) rear floor pan. This reinforcement plate is made of stainless steel for strength and added support for the factory floor...


Product#: FM110214

1967-69 Mustang; Floor Pan Reinforcement Plate; Right

This Floor Pan Reinforcement Plate is made specifically for the 1967-69 Ford Mustang right (passenger side) rear floor pan. This reinforcement plate is made of stainless steel for strength and added support for the factory...


Product#: 1667195

1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each

Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...


Product#: 11160A-CM

1964-70 Mustang, Cougar; Rear Transition Floor Panel; EDP Coated

Reproduction of the original rear transition panel manufactured with OE gauge steel and produced with the exact original specifications for a proper fit and function. This metal floor pan runs from the rear of the back seat...


Product#: M132R

1964-68 Mustang, Cougar; Bucket Seat Platform Panel; Passenger Side

Reproduction of the original bucket seat platform for 1964-68 Mustang coupe, 1965-68 fastback, and 1967-68 Cougar coupe models. Each bucket seat platform panel is manufactured in stamped steel to original factory...


Product#: M107BL

1964-70 Ford Mustang; Front To Rear Full Floor Pan Section; Convertible; LH

Reproduction of the original Mustang front to rear floor pan section for use with 1964-70 Mustangs. Covers area from 21" behind front seat to just past the area where the floor angles up to meet the firewall. Features all...


Product#: M107AR

1964-70 Ford Mustang; Front To Rear Full Floor Pan Section; Coupe/Fastback; RH

Reproduction of the original Mustang front to rear floor pan section for use with 1964-70 Mustangs. Covers area from 21" behind front seat to just past the area where the floor angles up to meet the firewall. Features all...


Product#: M132L

1964-68 Mustang, Cougar; Bucket Seat Platform Panel; Drivers Side

Reproduction of the original bucket seat platform for 1964-68 Mustang coupe, 1965-68 fastback, and 1967-68 Cougar coupe models. Each bucket seat platform panel is manufactured in stamped steel to original factory...


Product#: M107BR

1964-70 Ford Mustang; Front To Rear Full Floor Pan Section; Convertible; RH

Reproduction of the original Mustang front to rear floor pan section for use with 1964-70 Mustangs. Covers area from 21" behind front seat to just past the area where the floor angles up to meet the firewall. Features all...


Product#: 69530000

1967-73 Ford Mustang; Tunnel Patch Kit; For Tremec TKO 5-speed Conversion

This Hurst tunnel patch kit is custom made for 1967-1973 Ford Mustang applications when installing a Tremec TKO 5-speed transmission. This 2 piece tunnel patch kit is constructed from 18-gauge mild steel and is pre-rolled and...


Product#: 69510000

Universal Fit Tunnel Patch Kit; For Large Transmissions Including Tremec Magnum 6-speed Conversion; Hurst 69510000

The Hurst Universal tunnel patch is large enough for installing a most transmissions, including a Tremec Magnum 6-speed transmission in just about any vehicle. The universal tunnel patch is constructed from 20-gauge cold...


Product#: 69510003

Universal Fit Tunnel Patch Kit; For GM Vehicles; Tremec TKO 5-speed Conversion; Hurst 69510003

This Hurst Universal tunnel patch is intended for fabricating a new tunnel when installing a Tremec TKO 5-speed transmission in most GM vehicles. The tunnel patch is constructed from 20-gauge cold rolled steel and is...


Product#: M120L

1964-68 Ford Mustang; Front Bucket Seat Reinforcement Pan; Convertible; LH

Reproduction of the original front bucket seat reinforcement pan for use with 1964-68 Mustang models. Each seat panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...