Product#: M105

1964-73 Mustang, Cougar; Complete Floor Pan; Convertible

Reproduction of the original complete floor pan designed for use with 1964-73 Ford Mustang and Mercury Cougar convertible models. Each floor pan is manufactured in stamped steel to original factory specifications featuring...

Product#: M107AL

1964-70 Ford Mustang; Front To Rear Full Floor Pan Section; Coupe/Fastback; LH

Reproduction of the original Mustang front to rear floor pan section for use with 1964-70 Mustangs. Covers area from 21" behind front seat to just past the area where the floor angles up to meet the firewall. Features all...

Product#: M108R

1964-68 Mustang; Rear Half Floor Section Panel; Passenger Side

Reproduction of the original 1964-68 Mustang complete rear half floor section for RH passenger side side for convertible models. Located behind front seat. Original contour extends under lip of rear seat belt mounting on...

Product#: M108L

1964-68 Mustang; Rear Half Floor Section Panel; Drivers Side

Reproduction of the original 1964-68 Mustang complete rear half floor section for LH drivers side side for convertible models. Located behind front seat. Original contour extends under lip of rear seat belt mounting on...

Product#: M107L

1964-70 Mustang; Front Floor Pan; LH Drivers Side; EDP Coated

Reproduction of the original front floor panel for use with 1964-70 Mustang models. Located under and forward of front seat, extending about 5" up toward firewall. This floor panel is cosmetically correct for 1964-1968...

Product#: M112

Ford, Lincoln, Mercury Style; Floor Pan Plug; 2-7/8" x 4-5/8"

Galvanized and die stamped steel like the original. Can be used as a universal fit plug on practically any vehicle. The 2-7/8" x 4-5/8" floor pan plugs often need replaced from years of rust damage. Sold individually. Screws...

Product#: *84L020

Ford, Lincoln, Mercury; FLOOR PAN METAL PLUG; Pair; 3-3/4" x 2-3/8"

This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Sold individually....

Product#: M105HT

1964-68 Mustang, Cougar; Complete Floor Pan; Coupe & Fastback; EDP Coated

This complete floor pan for 1964-68 Mustang coupe or fastback and 1967-68 Cougar coupe models is manufactured to factory specifications. This stamped steel reproduction floor pan is built as a one-piece design featuring the...

Product#: M137

1964-70 Mustang; Seat Platform; Convertible; One Piece Design

Reproduction of the original seat platform designed for use with 1964-70 Ford Mustang convertible models. Each seat platform is manufactured in stamped steel to original factory specifications featuring correct contours for...

Product#: M137A

1964-68 Mustang, Cougar; Front Seat Platform Panel; Coupe/Fastback; One-Piece; Weld Thru Coated

Reproduction of the original seat platform designed for use with 1964-68 Ford Mustang coupe and Fastback models. Each seat platform is manufactured in stamped steel to original factory specifications featuring correct...

Product#: M111

Ford, Lincoln, Mercury Style; Floor Pan Plug; 3" x 4-1/2"

Galvanized and die stamped steel like the original plugs found on many Ford, Lincoln or Mercury models. The 3" x 4-1/2" floor pan plugs often need replaced from years of rust damage. Can be used as a universal fit plug on...

Product#: M126L

1965-70 Ford Mustang; Front Floor Pan To Firewall Extension; LH

This panel extends to the firewall up from where the floor pan ends. Connects the front of your floor pan to the bottom of the firewall. This is the floor extension for 1965-70 Mustang and 1967-70 Cougar models. Applications...

Product#: M107R

1964-70 Mustang; Front Floor Pan; RH Passenger; EDP Coated

Reproduction of the original front floor panel for use with 1964-70 Mustang models. Located under and forward of front seat, extending about 5" up toward firewall. This floor panel is cosmetically correct for 1964-1968...

Product#: M114AR

1964-70 Mustang Coupe / Fastback Passenger Side Torque Box

Direct replacement passenger (right hand) side torque box for 1967-68 Ford Mustang coupe and fastback and Mercury Cougar hardtop. Passenger side torque boxes were not standard equipment on Mustang coupes and fastbacks until...

Product#: M114AL

1964-70 Mustang Coupe / Fastback Driver Side Torque Box

Direct replacement driver (left hand) side torque box for 1967-68 Ford Mustang coupe and fastback and Mercury Cougar hardtop. Driver side torque boxes were not standard equipment on Mustang coupes and fastbacks until 1967....

Product#: M117

1964-68 Mustang Coupe/Fastback; Full Floor and Trunk Pan; Weld-Thru Primer

This 1964-1968 Ford Mustang Floor and Trunk Pan features quality one piece construction and features rockers, seat platforms, and frame rails pre-welded and ready to install. Manufactured using stronger, thicker, better...

Product#: FM110208

1967-69 Mustang; With Dual Exhaust; 6 Piece; Floor Pan Reinforcement Plate Set

This floor pan reinforcement plate set is made specifically for the rear floor pan on 1965 Ford Mustang with dual exhaust. These reinforcement plates are made of stainless steel for strength and added support for the factory...

Product#: M114R

1964-70 Mustang Convertible Passenger Side Torque Box

Direct replacement passenger (righ hand) side torque box for 1965-70 Ford Mustang and 1969-70 Mercury Cougar convertible models. Torque boxes were standard equipment on convertible models to increase chassis strength and...

Product#: M126R

1965-70 Ford Mustang; Front Floor Pan To Firewall Extension; RH

This panel extends to the firewall up from where the floor pan ends. Connects the front of your floor pan to the bottom of the firewall. This is the floor extension for 1965-70 Mustang and 1967-70 Cougar models. Applications...

Product#: M121C

1965-70 Ford Mustang; Front Floor Frame Support; Coupe/Fastback

Reproduction front floor frame support for 1965-70 Mustang coupe or fastback models. Measures: 2-1/2" H x 29-1/2" L. Made in USA Sold individually. Fits left hand (driver side) or right hand (passenger side). {specs}

Product#: M121A

1965-70 Ford Mustang; Front Floor Frame Support; Convertible

Reproduction front floor frame support for 1965-70 Mustang convertible models. Measures: 2-1/2" H x 29-1/2" L. Made in USA Sold individually. Fits left hand (driver side) or right hand (passenger side).

Product#: M130L

REAR UPPER TORQUE BOX, 1965-68 COUPE/ FASTBACK LH

Rear Upper Torque Box Patch Panels are constructed from heavy duty metal that will help support and reinforce the torque box and the body.This patch panel welds in place, and connects the floor pan, frame rail and inner...

Product#: M130R

REAR UPPER TORQUE BOX, 1965-68 COUPE/ FASTBACK RH

Rear Upper Torque Box Patch Panels are constructed from heavy duty metal that will help support and reinforce the torque box and the body.This patch panel welds in place, and connects the floor pan, frame rail and inner...

Product#: HK72

1964-68 Mustang 8 Piece Floor Pan Plug Screw Set

Set of screws for the drain hole covers on 1964-70 Mustang models. This set of 8 screws measures 1/4-20 X 1/2"

Product#: M114L

1964-70 Mustang Convertible Driver Side Torque Box

Direct replacement driver (left hand) side torque box for 1965-70 Ford Mustang and 1969-70 Mercury Cougar convertible models. Torque boxes were standard equipment on convertible models to increase chassis strength and reduce...

Product#: M106L

1965-68 Mustang; Short Front Floor Pan; Drivers Side; EDP Coated

Reproduction of the original front section of of the floor pan for use with 1965-68 Mustangs. Each floor panel is manufactured in quality stamped steel to the original configuration matching the design of the original...

Product#: M106R

1965-68 Mustang; Short Front Floor Pan; Passenger Side; EDP Coated

Reproduction of the original front section of of the floor pan for use with 1965-68 Mustangs. Each floor panel is manufactured in quality stamped steel to the original configuration matching the design of the original...

Product#: FM110213

1967-69 Mustang; Floor Pan Reinforcement Plate; Left

This Floor Pan Reinforcement Plate is made specifically for the 1967-69 Ford Mustang left (driver side) rear floor pan. This reinforcement plate is made of stainless steel for strength and added support for the factory floor...

Product#: FM110214

1967-69 Mustang; Floor Pan Reinforcement Plate; Right

This Floor Pan Reinforcement Plate is made specifically for the 1967-69 Ford Mustang right (passenger side) rear floor pan. This reinforcement plate is made of stainless steel for strength and added support for the factory...

Product#: 1667195

1955-1976 GM; Rubber Floor Pan Plug; Fits 1-1/2" Hole; Each

Reproduction of the original round rubber floor pan plug installed on various 1955-76 General Motors vehicles. Found in various locations on the floor pan, these plugs are manufactured to factory specifications in quality...

Product#: 11160A-CM

1964-70 Mustang, Cougar; Rear Transition Floor Panel; EDP Coated

Reproduction of the original rear transition panel manufactured with OE gauge steel and produced with the exact original specifications for a proper fit and function. This metal floor pan runs from the rear of the back seat...

Product#: M132R

1964-68 Mustang, Cougar; Bucket Seat Platform Panel; Passenger Side

Reproduction of the original bucket seat platform for 1964-68 Mustang coupe, 1965-68 fastback, and 1967-68 Cougar coupe models. Each bucket seat platform panel is manufactured in stamped steel to original factory...

Product#: M107BL

1964-70 Ford Mustang; Front To Rear Full Floor Pan Section; Convertible; LH

Reproduction of the original Mustang front to rear floor pan section for use with 1964-70 Mustangs. Covers area from 21" behind front seat to just past the area where the floor angles up to meet the firewall. Features all...

Product#: FBK6768

1967-68 Mustang Fastback; Body Bracket Kit; 42 Piece Set; Silver Weld-Thru Coating

When you begin a full restoration on your 1967-68 Mustang fastback you may discover rust on the inner structure of the body. With this bracket kit, you will get all the brackets and bracing your Mustang needs for a strong...

Product#: M107AR

1964-70 Ford Mustang; Front To Rear Full Floor Pan Section; Coupe/Fastback; RH

Reproduction of the original Mustang front to rear floor pan section for use with 1964-70 Mustangs. Covers area from 21" behind front seat to just past the area where the floor angles up to meet the firewall. Features all...

Product#: M120L

1964-68 Ford Mustang; Front Bucket Seat Reinforcement Pan; Convertible; LH

Reproduction of the original front bucket seat reinforcement pan for use with 1964-68 Mustang models. Each seat panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: M120R

1964-68 Ford Mustang; Front Bucket Seat Reinforcement Pan; Convertible; RH

Reproduction of the original front bucket seat reinforcement pan for use with 1964-68 Mustang models. Each seat panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: M132L

1964-68 Mustang, Cougar; Bucket Seat Platform Panel; Drivers Side

Reproduction of the original bucket seat platform for 1964-68 Mustang coupe, 1965-68 fastback, and 1967-68 Cougar coupe models. Each bucket seat platform panel is manufactured in stamped steel to original factory...

Product#: M107BR

1964-70 Ford Mustang; Front To Rear Full Floor Pan Section; Convertible; RH

Reproduction of the original Mustang front to rear floor pan section for use with 1964-70 Mustangs. Covers area from 21" behind front seat to just past the area where the floor angles up to meet the firewall. Features all...

Product#: 84L017

Ford, Lincoln, Mercury; Floor Pan Metal Plug; Each; 3-3/4" x 2-3/8"

This is the oval metal plug that seals off the oval hole in the rear footwell area of the floor pan on 1979-1993 Ford Mustang and 1979-86 Mercury Capri. This plug is often rusted or completely missing. Can be used as a...

Product#: 69530000

1967-73 Ford Mustang; Tunnel Patch Kit; For Tremec TKO 5-speed Conversion

This Hurst tunnel patch kit is custom made for 1967-1973 Ford Mustang applications when installing a Tremec TKO 5-speed transmission. This 2 piece tunnel patch kit is constructed from 18-gauge mild steel and is pre-rolled and...

Product#: 69510000

Universal Fit Tunnel Patch Kit; For Large Transmissions Including Tremec Magnum 6-speed Conversion; Hurst 69510000

The Hurst Universal tunnel patch is large enough for installing a most transmissions, including a Tremec Magnum 6-speed transmission in just about any vehicle. The universal tunnel patch is constructed from 20-gauge cold...

Product#: 69510003

Universal Fit Tunnel Patch Kit; For GM Vehicles; Tremec TKO 5-speed Conversion; Hurst 69510003

This Hurst Universal tunnel patch is intended for fabricating a new tunnel when installing a Tremec TKO 5-speed transmission in most GM vehicles. The tunnel patch is constructed from 20-gauge cold rolled steel and is...

Product#: M115

1964-68 Mustang Convertible; Full Floor and Trunk Pan; Weld-Thru Primer

This 1964-1968 Ford Mustang Floor and Trunk Pan features quality one piece construction and features rockers, seat platforms, and frame rails pre-welded and ready to install. Manufactured using stronger, thicker, better...

Product#: 46506A

1967-68 Mustang Fastback; Rear Seat Brace Trunk Divider Panel; EDP Coated

Reproduction of the original rear seat brace panel designed for use with 1967-68 Mustang Fastback models. Each panel is manufactured in stamped steel to original factory specifications featuring correct contours for an...

Product#: 10692B

1967-1968 Mustang; Front Floor Support; EDP Coated

Reproduction of the original front floor support designed for use with 1967-68 Ford Mustang models. Each front floor support panel is manufactured in stamped steel to original factory specifications featuring correct contours...