Product#: 16056D

1967-68 Mustang, Cougar; Fender Apron and Shock Tower Assembly; Drivers Side; EDP Coated

1967-68 Mustang and Cougar full shock tower assembly with 1-piece inner fender apron, shock tower and frame rail welded together. Fender aprons feature correct holes to accept the fender nuts and is a one-piece style to...

Product#: 16056C

1967-68 Mustang, Cougar Fender Apron and Shock Tower Assembly; Passenger Side; EDP Coated

1967-68 Mustang and Cougar full shock tower assembly with 1-piece inner fender apron, shock tower and frame rail welded together. Fender aprons feature correct holes to accept the fender nuts and is a one-piece style to...

Product#: 16102N

1967-68 Ford Mustang; Deluxe Fender Splash Shield With Rubber Seal; Rear; RH

This is a stamped steel panel with a rubber seal between the front fender and the fender apron to prevent road debris and water from splashing up on the head light and door post. {fitment}

Product#: 16102M

1967-68 Ford Mustang; Deluxe Fender Splash Shield With Rubber Seal; Front; RH

This is a stamped steel panel with a rubber seal between the front fender and the fender apron to prevent road debris and water from splashing up on the head light and door post. {fitment}

Product#: HK168

1965-68 Mustang Fender to Cowl Bolt with Nut and Rubber Pad

1965 - 1968 Mustang Fender to Cowl Bolt, with nut and rubber pad

Product#: 16056H

1967-68 Ford Mustang; Custom Front Apron Assembly; Without Shock Tower; Pair

Custom front apron assemby for your 1967-68 Mustang! If you want to revise your front suspension and add a touch of modern technology, we recommend installing these custom style front apron assemblies. Once installed, you'll...

Product#: 16102R

1967-68 Ford Mustang; Deluxe Fender Splash Shield With Rubber Seal; Rear; LH

This is a stamped steel panel with a rubber seal between the front fender and the fender apron to prevent road debris and water from splashing up on the head light and door post. {fitment}

Product#: 16102P

1967-68 Ford Mustang; Deluxe Fender Splash Shield With Rubber Seal; Front; LH

This is a stamped steel panel with a rubber seal between the front fender and the fender apron to prevent road debris and water from splashing up on the head light and door post. {fitment}

Product#: STAPLES

Staple For Inner Fender Splash Apron, 1/2 inch

Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.

Product#: M216

1967-68 Ford Mustang/Mercury Cougar; Front Fender Inner Apron; EDP Coated; RH Passenger Side

Reproduction of the original fender apron designed for use with all 1967-68 Mustang and Cougar models. Each apron is manufactured in stamped steel to the original factory configuration offering an authentic appearance and...

Product#: 3382C

1967-70 Mustang, Cougar; Outer Shock Tower; RH

The coil spring cover, outer shock tower cover bolts to the inner side shock tower around the coil spring. Heavy duty die stamped 16 gauge steel with a stronger 14 gauge inner support welded in place. Applications: 1967-1970...

Product#: 16054BR

1967-68 Ford Mustang/Mercury Cougar; Front Fender Inner Apron; EDP Coated; LH Driver Side

Reproduction of the original front fender apron designed for use with all 1967-68 Ford Mustang and Cougar models. This fender apron fits between shock tower and radiator support and spot welds into place. Installs on the...

Product#: M215L

1967-68 Mustang; Rear Front Fender Splash Shield; Drivers Side

Reproduction of the original style rear fender splash shield section designed for use with 1967-68 Mustangs. Each splash shield is manufactured in quality stamped steel replicating the original configuration of the factory...

Product#: M215R

1967-68 Mustang; Rear Front Fender Splash Shield; Passenger Side; EDP Coated

Reproduction of the original style rear fender splash shield section designed for use with 1967-68 Mustangs. Each splash shield is manufactured in quality stamped steel replicating the original configuration of the factory...

Product#: M227AL

1967-68 Mustang/Cougar Fender Rear Apron Extension Bracket - LH

Reproduction stamped steel rear fender apron extension, also referred to as a fender apron bracket, for 1967-68 Mustang and Cougar. Attaches to cowl and back of fender apron, this metal fender apron extension joins the rear...

Product#: 3438F

1967-68 Mustang, Cougar; Complete Inner Shock Tower; Drivers Side

Reproduction stamped heavy gauge steel shock tower welded assembly for 1967-68 Mustang and Cougar models (except 428 or 429ci). Comes finished in EDP coating to protect against corrosion. Welds to the front frame rail, and...

Product#: 3438E

1967-68 Mustang, Cougar; Complete Inner Shock Tower; Passenger Side

Reproduction stamped heavy gauge steel shock tower welded assembly for 1967-68 Mustang and Cougar models (except 428 or 429ci). Comes finished in EDP coating to protect against corrosion. Welds to the front frame rail, and...

Product#: 3382D

1967-70 Mustang/Cougar Outer Shock Tower, LH

The coil spring cover, outer shock tower cover bolts to the inner side shock tower around the coil spring. Heavy duty die stamped 16 gauge steel with a stronger 14 gauge inner support welded in place. Applications: 1967-1970...

Product#: M227L

1967-68 Mustang, Cougar; Front Fender Apron; Rear Section; Drivers Side; EDP Coated

Reproduction of the original rear front fender apron designed for use on all 1967-68 Mustang and Cougar models. Each apron is manufactured in heavy gauge stamped steel offering an authentic appearance and fitment. This rear...

Product#: M227R

1967-68 Mustang, Cougar; Rear Front Fender Apron; Passenger Side; EDP Coated

Reproduction of the original rear front fender apron designed for use on all 1967-68 Mustang and Cougar models. Each apron is manufactured in heavy gauge stamped steel offering an authentic appearance and fitment. This rear...

Product#: M227AR

1967-68 Mustang/Cougar Fender Rear Apron Extension Bracket - RH

Reproduction stamped steel rear fender apron extension, also referred to as a fender apron bracket, for 1967-68 Mustang and Cougar. Attaches to cowl and back of fender apron, this metal fender apron extension joins the rear...

Product#: A1016

Nylon Trim Panel Retainer; 1/2" Head Diameter; 9/32" Stem Diameter, 3/4" Stem Length

Replacement nylon trim panel retainer used on multiple GM vehicles. From fender skirts, body fillers, bumper seals, and other various places. Replaces GM# 411700. Correct hardware can make any installation job easier. Replace...

Product#: B12248

#8AB X.64 Wide X 1.0; U-Nut;.03-.015 Panel Thickness; Green Dipspin Finish

Product#: HK272

1967-73 Mustang; Shock Tower Nut Set; 6 Pieces

A set of six (6) CAP nuts. Used to attach shock tower tops to the shock towers on 1967-73 Mustangs.

Product#: HK17A

1967-73 Mustang; Shock Tower Bolt Set; 6 Pieces; Silver

Applications: 1967-1973 Ford Mustang 1967-1973 Mercury Cougar

Product#: 16052A

1967-68 Mustang, Cougar; Firewall to Shock Tower Braces; Pair; EDP Coated

Reproduction of the original firewall-to-shock-tower brace set designed for 1967-68 Mustang and Cougar models. Manufactured from heavy gauge stamped steel replicating the original design, appearance, and fitment. Braces...

Product#: 376966

1964-79 Ford; 5/8" Rubber Plug; Inner Front Fender Apron, Cowl; Various Models and Applications

Reproduction rubber plug for the inner front fender or cowl on various Ford and Mercury models. Also fits 1979-93 Mustang and 1979-86 Capri models under rear seat access hole. Manufactured to replicate the original plug. 2...