Product#: MT52882Z

1966-70 Various GM Vehicles Including Impala, GTO, Skylark Models; Rebuild Kit; Muncie 4 Speed; M20, M21, M22

Muncie 4 Speed Deluxe Rebuild / Service Kit with 1" Pin and 27 Spline Output Shaft. This is the finest deluxe rebuild kit on the market.  This kit fit various 1966-70 GM vehicles including Chevrolet Impala, Buick...

Product#: 9793565

1969 Camaro; Chrome Shift Ball; 1-3/4" Diameter: 3/8"; with Hurst Shifter

Reproduction heavy weight chrome shift knob for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Fits models with a 3 speed or 4 speed Hurst manual...

Product#: 3921147W

1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; White; Various Models;

Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This 1-3/4" shift knob can be installed on most factory shifters with 1-3/4" with 5/16"-18 SAE Thread at the top of the stick. Features engraved...

Product#: 3921147B

1958-70 GM; Muncie 4-Speed Shift Knob; 1-3/4" with 5/16"-18 Thread; Black; Various Models;

Reproduction shift knob used with Muncie 4 speed transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...

Product#: 3922525

1963-70 Chevy, Pontiac; Chrome Shift Ball; Muncie; Manual Trans; 1-3/4" Dia. 5/16" Thread;

Reproduction of the original style heavy weight chrome shift knob designed for high horsepower performance models. Manufactured in zinc die-cast and triple chrome plated to a high lusterous shine. Includes correct recessed...

Product#: 748742

1958-88 Buick, Chevrolet, Pontiac, Oldsmobile; Clutch Bell Crank Z-Bar Pivot Bushing Set; 4 Piece Set

This is The plastic clutch bell crank or Z bar insert set that allow the bar to pivot. These are present on most all GM cars from 1958-88 with a manual transmission. This four piece set which includes 3 nylon bushings and a...

Product#: 3733643

1965-67 Impala/Full Size; Shift Linkage Install Kit

1965-1967 Impala / Caprice / Bel Air Linkage Install Kit including Shifter Rods, Lever Arms & Bracket for Hurst 4 Speed 3912747 Competition Plus Shifter connected to factory Muncie type 451 transmission. Replaces OE #...

Product#: 3961437A

1963-71 GM; Various Models; Hurst 4-Speed Shift Knob; 3/8" Thread; Black With Chrome Base

Reproduction shift knob used with GM 4 speed Hurst transmissions of the 1960s. This black 2 piece shift knob consist of the upper shift ball and a lower chrome lock nut that acts as a jamb nut to lock the shift pattern in...

Product#: CP2029Z

1964-1981 Various GM Applications; Hurst 4 Speed; Shift Retainer Plate GM# 1952029

Replacement shifter retainer plate designed to tighten up worn Hurst 4 speed shifters for various 1964-81 GM models including Impala, GTO, Skylark models. The heavy stamped steel plate bolts between the shifter arm and body...

Product#: CP2497Z

1970-79 Various GM Applications; Manual Transmission; Hurst Shifter; Lower Dust Shield

Replacement Hurst shifter stainless steel lower dust shield for various 1964-81 GM applications including El Camino, Grand Prix, Firebird models. For applications with Hurst shifter. This mounts on the bottom of the shifter...

Product#: FMB70

Lokar Floor Shifter Boot with Stainless Steel Ring

This floor mount shifter boot and retaining ring are the perfect match for Lokar's floor mount shifter. Made in USA Inner ring dimension s measure 5-1/2" x 4". Outer ring dimensions are 6-3/4" x 5-1/4".

Product#: 27163

TCI 6X Transmission Package with Paddle Shifter

Get the latest in automatic transmission technology with the innovative TCI 6x six speed! Designed for Chevy small block, big block, and LS engines, this 4L80E-based transmission is perfect for both everyday driving and race...

Product#: TR7532

1955-57 Bel Air; 59-69 Impala; Full-size Passenger Car; American Powertrain TKX 5-Speed Driveline Conversion Kit; 600ft-lb Constant Load Rated; Wide Ratio; 0.68 O.D.

American Powertrain ProFit Conversion combo kits include the components required to convert your vehicles manual driveline to a modern Tremec TKX 5 speed manual overdrive transmission. Specially prepped case mods for easier...

Product#: TR7531

1955-57 Bel Air; 59-69 Impala; Full-size Passenger Car; American Powertrain TKX 5-Speed Driveline Conversion Kit; 600ft-lb Constant Load Rated; Quick Launch Close Ratio; 0.72 O.D.

American Powertrain ProFit Conversion combo kits include the components required to convert your vehicles manual driveline to a modern Tremec TKX 5 speed manual overdrive transmission. Specially prepped case mods for easier...

Product#: TR1021

UltraCase M22Z 4 Speed Transmission: M22 CLOSE RATIO 2.98-1st, 2.04-2nd, 1.46-3rd. 1.0 4th; 10/27 Spline; Bolt Levers

There are exotic transmissions designed for the quarter mile or circle tracks, but if your Muscle Car sees city streets or country lanes you need a heavy-duty, synchronized, close-ratio gearbox with a helical gearset and, to...

Product#: TCET17722

American Powertrain TKX 5-Speed Tremec Transmission; GM Applications; 26-Spline; Close Ratio: 0.81 O.D.

These American Powertrain Tremec TKX 5-speed series overdrive high performance transmissions. Available in (Road Race) edition and offers a variety of flexibility features and is rated at 600 ft/lbs, includes a unique...

Product#: 3917535

Hurst; Street Supershifter 4-Speed Shifter; 3 & 4 Speed Top-Loader Transmissions

Hurst Street Supershifter universal 4-speed shifter. They feature a 7 1/2" tall chrome-plates steel stick with 4 3/4" of knob throw and adjustable stops to prevent overshifts. Installation kit and console/floor pan...

Product#: 5381000

Hurst; Nitro Stick Shift Handle; With Built-In 12V Switch; Anodized Aluminum Finish

The Hurst Nitro Stick shift handle is designed to bring the classic 'pistol grip' well into the 21st Century. Machined from billet 7075 aluminum, brushed then given a clear anodized finish, the Nitro stick provides a positive...

Product#: 5010002

Hurst; Indy Universal 3-Speed Manual Transmission Shifter Assembly; Car Style (Short); Fits Many 1949-Later Chrysler, GM And Ford

This economically priced manual transmission shifter is of universal design, so it will fit a wide variety of applications. It is ideal for converting column shift 3 speeds to floor shift. Features: Spring loaded gate for...

Product#: M37010

MOMO Trofeo Shift Knob - Mohogany / Beech Wood

The MOMO Trofeo shift knob is born through extensive prototyping to find the perfect ergonomics for the driving enthusiast in a manual vehicle. It can be grasped in the palm of the hand but is equally adept for three-finger...