1965-70 Impala / Full Size LH/RH 12 Bolt 31-3/8" Long, 5 Lug, 30 Spline Rear Axle
This rear axle is built to stand up to the demands of high-performance applications. Made from 1541H steel, this axle contains significantly more manganese than 1040 or 1050 steel versions. This greatly increases strength and...
1965-70 Impala / Full Size LH/RH 12 Bolt 31-3/8" Long, 5 Lug, 30 Spline Rear Axle
Classic $340.99 ea
1966-70 Full Size Moser C-Clip Axles 10 Bolt 31-5/16" Long 28 Spline
Moser offers forged steel street axles for 10 and 12 Bolt Chevrolet rear ends. These axles are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE applications. Note: No further discount s apply.
1966-70 Full Size Moser C-Clip Axles 10 Bolt 31-5/16" Long 28 Spline
Classic $334.99 pr
1966-70 Impala / Full Size Moser 30 Spline, 31-5/16" Long C-Clip Axles For 12 Bolt Rear Ends
These Moser forged steel street axles for 12 bolt Chevrolet rear end are non-tapered, with hardened bearing seats and machined C-clip grooves to fit OE application. Made in the USA Note: Special order, must be prepaid....
1966-70 Impala / Full Size Moser 30 Spline, 31-5/16" Long C-Clip Axles For 12 Bolt Rear Ends
Classic $334.99 pr
1965-72 Impala / Full Size LH/RH 10 Bolt 31-3/8" Long 28 Spline Rear Axle
This rear axle is built to stand up to the demands of high-performance applications. Made from 1541H steel, this axle contains significantly more manganese than 1040 or 1050 steel versions. This greatly increases strength and...
1965-72 Impala / Full Size LH/RH 10 Bolt 31-3/8" Long 28 Spline Rear Axle
Classic $315.99 ea
1965-81 Axle Shaft Lock/C-Clip (.150)
Original replacement locks for applications below. Fits 1967-81 with.150 horseshoe.
Prevent costly damage by replacing rear axle bearings before they seize with this premium replacement rear axle bearing. Always check the bearings and seals whenever removing the rear drums/axle for signs of wear. Sold...
Moser 7/16" - 20 X 1-3/4" Thread 0.480" Knurl press-In Stud; RH
These grade 8 press-in Moser wheels studs are designed for rear axles with disc brakes. These are a great addition when installing Moser axles on your vehicle or just replacing your old wheel studs. Sold as a set of 10. One...
Moser 7/16" - 20 X 1-1/4" Thread 0.480" Knurl press-In Stud; RH
These grade 8 press-in Moser wheels studs are designed for rear axles with drum brakes. These are a great addition when installing Moser axles on your Camaro or just replacing your old wheel studs. Sold as a set of 10. Note:...
Moser Axle C-Clip Eliminator with Moser Axles and 1.533" Bearing Seat
These improved C-Clip Eliminators eliminates the factory C-clip axle retention and provides a safety hub with sealed, press-on bearings. Now with an extra internal seal to help prevent leakage. The C-Clip Eliminators are...
Moser Axle C-Clip Eliminator with Moser Axles and 1.533" Bearing Seat
Classic $209.99 pr
GM 8.2 Differential Master Bearing Kit
For GM 8.2" (10 Bolt), 1.7812" ID Bearings, Fits Aftermarket Ring and Pinion, OEM Ring and Pinion Applications Require Part# 3106. Master Bearing Kit Includes Timken Tapered Bearings (Carrier, Front and Rear Pinion, Pilot...
1963-91 GM Rear Axle Repair Kit
Classic Industries® offers a sealed repair bearing that will replace the rear axle bearing on your classic when damage has occurred to the axle shaft from a worn-out bearing. This bearing is a sealed, self-contained,...
1963-89 Chevrolet/GMC 1/2 Ton Truck Rear Axle Bearing
Prevent costly damage by replacing rear axle bearings before they seize with this premium replacement rear axle bearing. Always check the bearings and seals whenever removing the rear drums/axle for signs of wear. Sold...
1971-2002 GM; Rear Axle Ventilator; Various Models; Reproduction; For.452 Hole
Reproduction rear axle ventilator for various 1971-2002 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac models as listed. Each ventilator is manufactured in quality injection molkded ABS replicating the original design...
1971-2002 GM; Rear Axle Ventilator; Various Models; Reproduction; For.452 Hole
Classic $9.99 ea
Competition Engineering Mild Steel Rear End. Fabricated Ford 9" rear axle housing triangulated design offers increased strength over three piece stock housings. CAD designed, CNC manufactured and offered in 4130 Chrome Moly...
Competition Engineering Fabricated Ford 9" Rear Housing; Full Bodied Car; Mild Steel; 3" Axle Tubes; 60.75" Length
Classic $831.99 ea
1964-02 Rear Axle Bearing Seal
Prevent premature bearing or brake failure! Replace cracked or deteriorated rear axle seals to keep gear oil and grease in the axle tube, where it belongs. Sold individually. 2 required per vehicle. Applications: 1967-86...
1953-2010 GM; Rear Axle/Transmission Ventilator; for 3/8" Hole
OER® reproduction of the ventilator used by GM on a multitude of applications from the 1950s thru todays cars and trucks including the rear axle housing, automatic transmissions. front transfer case on 4 x 4 models and...
1/2" Transmission and Axle Drain Plug
Correct plug which is removed when draining or filling the rear axle or transmission lubricant.