Product#: E75011

Performer RPM Air Gap Manifold; For Small Block Chevy; Non-EGR; Polished Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: E5409

1958-65 Chevrolet 348/409 Large port Performer RPM Dual Quad Intake Manifold With Satin Finish

Performer RPM Dual-Quad intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W" Series factory large port or with Edelbrock Performer RPM W-series heads Part # E60819 (so ld separately). This manifold delivers...

Product#: E26011

1955-86 Chevrolet Small Block Non-EGR Edelbrock Performer Air Gap; Intake Manifold; Polished Aluminum

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. Designed for 1955-86 small block Chevys. The air-gap design features an open air space that...

Product#: G34401

Chevrolet Performance 25534401 - LS3 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: OF5694

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual Quad; Square Bore; High-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad High-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: OF5603

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual Quad; Spread Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with its...

Product#: E7159

Chevrolet 348/409 Large ported Edelbrock Performer RPM W-Series Intake Manifold With As Cast Finish

This new Performer RPM intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W-Series" big-block engines with factory large port or with Edelbrock Performer RPM "W-Series" heads Part # E60819 (sold separately) and...

Product#: G34394

Chevrolet Performance 25534394 - LS7 4-Barrel Intake Manifold

*Penny Shipping! For a limited time, this item ships for only $0.01 (one cent) to any address within the contiguous USA. Order NOW and $AVE! *Note: Applicable shipping fees may be required on additional items added to the...

Product#: E7158

Chevrolet 348/409 Small ported Edelbrock Performer RPM W-Series Intake Manifold With As Cast Finish

This new Performer RPM intake manifold is designed to fit 1958-1965 Chevrolet 348/409 "W-Series" big-block engines and will deliver improved performance in the mid to high rpm range when combined with Edelbrock carburetor's....

Product#: OF5253

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Dual-Quad; Square Bore; Low-Rise

Offenhauser 360 Degree Equa-Flow Dual-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with its...

Product#: E26013

1955-86 Chevrolet Small Block Non-EGR Edelbrock Performer Air Gap; Intake Manifold; Black

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. Designed for 1955-86 small block Chevys. The air-gap design features an open air space that...

Product#: OF6007DP

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser Dual Port 360 Degree Intake Manifold; Single Quad; Square Bore

Offenhauser Dual Port intake manifolds feature completely separate runner systems for the primaries and secondaries for more power across the rpm range. At low-load, the primaries feed the air/fuel charge through the smaller...

Product#: E5419

1955-86 Chevrolet Small Block Edelbrock Three Deuce Intake Manifold For Use with 4 Bolt Carburetors

This triple deuce idle to 5500 RPM non EGR manifold is designed for 1955-86 262-400 c.i.d. small block Chevrolet engines. The manifold has a balanced 180° firing order port runner arrangement and contains an exhaust gas...

Product#: OF5617

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Spread Bore; Low Profile

Offenhauser 360 Degree Equa-Flow Single-Quad Low-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E27163

Performer EPS Vortec Manifold; Chevrolet 262-400 Small Block; Black Finish

Available for small-block Chevrolet with Vortec or Edelbrock E-Tec cylinder heads, the performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder...

Product#: OF1035

1950-62 Chevrolet Stovebolt Inline-6; 235 ci; Offenhauser Dual Intake Manifold; 2 x 1 Barrel

Offenhauser Dual Manifolds are ideal for situations where you want to get a nostalgic 2-carb look, but still have a custom appearance. Precision-machined from cast aluminum , these manifolds are designed to equalize fuel...

Product#: OF5693

1957-86 Chevrolet SBC V8; 283-400 cid; Offenhauser 360 Degree Equa-Flow Intake Manifold; Single-Quad; Square Bore; High-Rise

Offenhauser 360 Degree Equa-Flow Single-Quad High-Rise intake manifolds make good use of Offy's 360 degree technology to feed all cylinders evenly and make more power. This results from their single-plane configuration, with...

Product#: E71013

1955-86 Chevrolet Small Block without EGR Performer RPM; Square Bore Intake Manifold; Black Finish

Edelbrock's Performer RPM manifold is a dual-plane, high-rise intake manifold with a 180° firing order to produce incredible top end horsepower while retaining good throttle response. Has provisions to machine for an oil...

Product#: E7501

Performer RPM Air Gap Intake Manifold; Chevy Small Block w/o EGR; Square Bore; Natural Finish

This award winning design incorporates the same race winning technology that's been used by Edelbrock competition intakes for years. The air-gap design features an open air space that separates the runners from hot engine oil...

Product#: H8120

1955-86 Chevrolet; 262-400 Small Block; Holley; Street Warrior; Black Ceramic Coated Intake Manifold

Weiand is proud to introduce select intake manifolds in their all new carbon black ceramic coating! The coating provides an aggressive yet subtle look that goes perfectly with the understated build styles that are popular...