Product#: CX1438

1947-55 Chevrolet/GMC Truck; 1st Series; Front Fender Gasket Set

OER® reproduction front fender gasket set for 1947-55 Chevrolet & GMC truck models. Each gasket set is designed to replace the front fender gaskets for both RH and LH sides. Always use new gaskets when replacing or...

Product#: CB235

1947-55 Chevrolet/GMC Panel & Suburban Truck; Seal; Cab to Running Board; Black Rubber

These seals drops down from under side of cab. Fills in the gap between the cab and running board on the Panel and Suburban vehicles. Sold as pair. NOTE: If you need the shorter seal for a pickup trucks check CB234. {fitment}

Product#: FP119

1947-Early 55 Chevrolet/GMC Truck; Gasket & Seals; Front & Inner Fender; 8 PCS

Prevents metal to metal contact between inner and outer fenders and firewall filler plates. Sold as a set of 8 gaskets. {fitment} Made in USA

Product#: FL230

1947-Early 55 Chevrolet/GMC Truck; Gasket; Running Board To Rear Fender

Prevents metal to metal contact between the rear of the running board and front of rear fender. {fitment}

Product#: FL132

1947-Early 55 Chevrolet/GMC Truck; Battery Floor Hole Seal; Closed Cell Rubber

This rubber seal is attached to the battery box cover in floor. Stops air leaks and rattles. {fitment} Made in USA

Product#: FP126

1934-Early 55 Chevrolet/GMC Truck; Drain Tube; Cowl Vent; Rubber

Drains rain water from the top cowl vent pan under the cowl. It is visible on the engine side of the firewall. Note: Cut about 1 off each end for 1934-46. trucks. {fitment}

Product#: CB234

1947-55 Chevrolet/GMC Truck; Seal; Cab to Running Board; Black Rubber

These seals drops down from under side of cab. Fills in the gap between the cab and running board. Sold as pair. NOTE: If you need the longer seal for a Suburban or panel truck check CB235. Made in USA {fitment}

Product#: TC475G

1947-55 Chevrolet, GMC; Transmission Cover Gasket Set

Reproduction of the original transmission cover gaskets for use on 1947-55 Chevrolet and GMC truck models with 3/speed and 4/speed transmissions. These gaskets are mounted between the transmission cover and the cab floor....

Product#: CB136

1947-55 Chevrolet/GMC Truck; Retainer; Cab to Running Board Seal; 36" Long

These steel strips secures the rubber seal to the underside of the cab. Sold as each. 36 long. Note: On longer Suburbans and Panel trucks two strips are required for each side.Made in USA {fitment}

Product#: FP217

1947-Early 55 Chevrolet/GMC COE Truck; Seal; Cowl to Hood; Rubber

This rubber seal fits on the body cowl and touches the rear of hood. This is used only for the Cab-Over-Engine body (COE) and consists of two 21 lengths. {fitment}

Product#: STAPLES

Staple For Inner Fender Splash Apron, 1/2 inch

Correct staple to install fender skirt splash aprons for various models. 1/2" wide, 1/2" deep.

Product#: CX1897

1947-53 Chevrolet, GMC Pickup Truck; Running Board Splash Apron; Shortbed; LH

Reproduction of the original running board splash apron designed for use with 1947-53 Chevrolet and GMC truck models. Manufactured in stamped steel replicating the original configuration. Includes the elbow bracket and...

Product#: CX1898

1947-53 Chevrolet, GMC Pickup Truck; Running Board Splash Apron; Shortbed; RH

Reproduction of the original running board splash apron designed for use with 1947-53 Chevrolet and GMC truck models. Manufactured in stamped steel replicating the original configuration. Includes the elbow bracket. This...

Product#: CX1300

1952-66 Chevrolet/GMC Pickup Outer Door Handle Gasket Set

Reproduction of the original door handle pads for 1952-66 Chevrolet and GMC trucks. This set is for a two handles to both sides. One set is required per vehicle. Note: For a half set that includes gaskets for a single door,...

Product#: CX1167

1947-55 Chevrolet/GMC Truck; Outer Mirror Arm Gasket; LH Or RH

Reproduction outer side mirror gasket for 1947-55 models. Replace the original worn out gasket with this excellent reproduction. {fitment} {specs}

Product#: CX1441

1947-55 Chevrolet, GMC Truck; Running Board to Cab Seals; Pair

Reproduction of the original running board to cab seals designed for use with 1947-55 Chevrolet and GMC pickup truck models. The seals are manufactured to original specifications and replace the originals exactly. Replace...

Product#: CR1085M

1947-53 GM Truck Molded Rubber Cowl Vent Gasket

Reproduction cowl vent gaskets for early 1947-53 models.

Product#: PW1075

1942-66 Chevy, GMC Truck; Rear Window Weatherstrip Seal; Small Window; with Chrome Lock Strip

Reproduction of the rear window weatherstrip seal which fits the small back window on various 1942-1966 Chevrolet and GMC pickup trucks. Each weatherstrip includes the chrome lock strip. Manufactured from ozone resistant EPDM...

Product#: HE473

1947-53 Chevrolet Pickup; Chevrolet Hood Emblem Gasket

Reproduction of the original Chevrolet hood emblem gasket for use with 1947-53 Chevrolet truck models. Each gasket is die-cut to factory dimensions.This gasket inserts between the emblem and the hood. Protects the paint and...

Product#: CX1506

1947-66 Chevy, GMC Truck; Inner Door Handle Gasket Set

Reproduction of the original inner door lock gaskets designed for use with use with 1947-66 Chevrolet and GMC model trucks. 8 piece set. {fitment}