Product#: B1434

1947-57 GM Headlamp Adjusting Screw and Nut Set

Headlamp Adjustment screw set for various 1947-57 GM models including Bel Air, Nomad, and Pickup. The correct hardware will make your installation easier, and give your classic a finished look. Sets includes adjuster screws...


Product#: 41483

Screw #8 X 1" with #6 Phillips Head Tapping Screws; Chrome; Set of 4

Set of 4 screws used to attach various parts including 1974-78 Mustang II headlamp bezels # 13064P.


Product#: *T1450

1947-57 Headlight Adjuster Set - 2 Headlamp Style

Don't get left in the dark! Replace your damaged or missing headlamp adjusters with these quality reproductions. Includes adjusters for both LH and RH headlamps. Applications: 1947-57 Chevrolet / GMC Trucks with 2 Headlamp...


Product#: J1039

1947-54 Chevrolet, GMC Truck; Headlamp Housing Wiring Grommets; Pair

Reproduction of the original headlamp housing wiring grommets for use with 1947-54 Chevrolet and GMC truck models. Protect your headlight wiring at the headlamp mounting housing with the correct wire harness rubber grommets....


Product#: J1037

1947-54 GM Truck Headlamp Wiring Grommets

Reproduction headlamp wiring grommets for 1947-54 GM truck models. These grommets secure the headlamp harness to the inner fenders.


Product#: A2303

J Nut #10 Screw Size;.027-.045 Panel Thickness; Phosphate

J Nut #10 Screw Size,.027-.045 Panel Thickness. Center of hole to Edge: 3/16". Phosphate Finish.


Product#: LG605

1947-57 Chevrolet/GMC Truck; Securing Clip; Headlamp Ring

This small clip rivets or welds to the bottom of the headlight bucket and helps secure the headlight rings. Often badly rusted in otherwise good headlight buckets. This clip saves the expense of buying the complete headlight...


Product#: A1459

#10 x 1" Slotted Pan Head Tapping Screw; Zinc Chromate

#10 x 1" slotted pan head tapping screw. Bright Zinc chromate for rust resistance.


Product#: J1041

1947-54 GM Truck 32 Piece Headlamp Housing Hardware Set

Reproduction headlamp housing hardware for all 1947-54 GM trucks. Set includes all the necessary screws and clips used on the headlamp housing assemblies.


Product#: TF401074

1941-57 GM Passenger Car; 1947-57 GM Truck; Headlamp Adjuster Screw Retaining Nut

Reproduction headlamp adjuster screw retaining nut for various 1941-57 GM models. Manufactured to fit like the original, this piece is inserted into the headlamp bucket and acts as the mounting point for the adjuster screw....


Product#: CX2039

1947-55 Chevy, GMC Truck, 1953-55 Corvette; Headlamp Switch; 12 Volt

Reproduction of the original style headlamp switch designed for use on 1947-55 Chevrolet, GMC trucks, and 1953-55 Corvette models with 6 volt systems with fused dome, stoplight & glove box circuit. For use with 1953-55...


Product#: C2504

1947-55 (1st Series) GM Pickup 4 Piece Headlamp Bezel Clip Set

Reproduction headlamp bezel clips for 1947-55 Chevrolet or GMC trucks. This set of clips holds the headlamp bulb to the headlamp bezels. Note: 1 set does a single headlamp bezel.


Product#: CX2038

1947-55 Chevy, GMC Truck, 1953-55 Corvette; Headlamp Switch; 6 Volt

Reproduction of the original style headlamp switch designed for use on 1947-55 Chevrolet, GMC trucks, and 1953-55 Corvette models with 6 volt systems with fused dome, stoplight & glove box circuit. For use with 1953-54...


Product#: CX1229

1955-56 Chevy Bel Air, 150, 210; 1947-57 Chevy, GMC Truck; Headlight Bezel Seals; Pair

Reproduction of the original headlamp bezel seals designed for use on 1947-57 Chevrolet and GMC truck models, and 1955-56 Chevy Bel Air, Nomad, One Fifty and Two Ten models. Each gasket will replace the worn or missing...


Product#: *R493

Chrome Trim Screw, #8 x 3/4", With #8 Phillips Oval Head, 10 Piece Set

Original style oval head chrome screw set designed to install sill plates and other various components and parts. Includes 10 chrome phillips oval head #8 x 3/4" screws. Set includes 10 phillips oval head screws. Use as...


Product#: *R492

Screw Set; Chrome Plated ; #8 x 3/4" Oval Phillips Head ; Set of 8 ;

Original style oval head chrome screw set designed to install sill plates, headlamp bezels, shift plates and other various components and parts. Includes 8 chrome phillips oval head #8 x 3/4" screws. Use as required. Can be...


Product#: A10165

# 8 x 3/4" Oval Phillips Head Screw; Black Oxide; #8 Head

Original style oval head black-oxide screw originally used to install moldings, grill and headlamp bezels, and various other components and parts on classic American cars and trucks. Sold individually. Use as required. Can be...


Product#: 3982098

U-Type Extruded Clip Nut, Fits 1/4-20 Bolts, Black Phosphate Coated

Replacement U-clip nuts used on various GM vehicles. Black phosphate coated. Quantities vary by model. Use as needed. This is the correct nut used to install the rear tail lamp to the body. Can be used to install the rear...