Product#: ML32250

Chevrolet 350/400 Small Block Milodon Diamond Stripper Screen Windage Tray

Add 12 to 25 Horsepower with a Windage Tray! Windage trays permit the rapid return of oil to the sump providing increased horsepower for both street and strip. On a 400 horsepower street engine, a louvered tray can add 12-15...

Product#: 267700

Chevrolet Small Block Valvetrain Oil Deflectors

Use these lightweight aluminum deflectors to redirect oil from your small block Chevy pushrods directly to the rocker arm fulcrum balls for better lubrication, less wear and longer valvetrain life. Mount easily to stock...

Product#: ML32102

Chevrolet 350 Small Block with RH Dipstick Milodon Solid Louvered Windage Tray

Add 12 to 25 Horsepower with a Windage Tray! Windage trays permit the rapid return of oil to the sump providing increased horsepower for both street and strip. On a 400 horsepower street engine, a louvered tray can add 12-15...

Product#: ML32200

Chevrolet Big Block Mark IV,V,VI Milodon Solid Louvered Windage Tray

Add 12 to 25 Horsepower with a Windage Tray! Windage trays permit the rapid return of oil to the sump providing increased horsepower for both street and strip. On a 400 horsepower street engine, a louvered tray can add 12-15...

Product#: ML32505

Chevrolet Big Block Milodon Oil Pan Baffle

Prevent Oil Climbing During Acceleration! Installed between the oil pump and rear main, this special baffle effectively prevents oil from climbing up the rear of the pan during hard acceleration. An easy addition to assure...

Product#: ML32260

Chevrolet Big Block Mark IV, V, VI Milodon Diamond Stripper Screen Windage Tray

Add 12 to 25 Horsepower with a Windage Tray! Windage trays permit the rapid return of oil to the sump providing increased horsepower for both street and strip. On a 400 horsepower street engine, a louvered tray can add 12-15...

Product#: 81150

Chevrolet Small Block Milodon Windage Tray Install Set

Windage tray install set is required to properly mount the tray assembly. The adjustable mounting position allows the tray to work at its maximum potential by being as close as possible to the rotating assembly (min.100") and...

Product#: 225050

Chevrolet Small Block Lifter Valley Oil Baffle

This aluminum lifter valley baffle simply snaps into place in the lifter valley, shielding the bottom of the intake manifold from hot oil to keep incoming air cool and dense. It also keeps excess oil out of the valve covers...

Product#: 225100

Chevrolet Big Block Lifter Valley Oil Baffle

This aluminum lifter valley baffle simply snaps into place in the lifter valley, shielding the bottom of the intake manifold from hot oil to keep incoming air cool and dense. It also keeps excess oil out of the valve covers...

Product#: ML32101

Chevrolet 400 Small Block with LH Dipstick Milodon Solid Louvered Windage Tray

Add 12 to 25 Horsepower with a Windage Tray! Windage trays permit the rapid return of oil to the sump providing increased horsepower for both street and strip. On a 400 horsepower street engine, a louvered tray can add 12-15...

Product#: ML32100

Chevrolet 350 Small Block with LH Dipstick Milodon Solid Louvered Windage Tray

Add 12 to 25 Horsepower with a Windage Tray! Windage trays permit the rapid return of oil to the sump providing increased horsepower for both street and strip. On a 400 horsepower street engine, a louvered tray can add 12-15...

Product#: ML32500

Chevrolet Small Block Milodon Oil Pan Baffle

Prevent Oil Climbing During Acceleration! Installed between the oil pump and rear main, this special baffle effectively prevents oil from climbing up the rear of the pan during hard acceleration. An easy addition to assure...

Product#: 81151

Chevrolet Big Block / Pontiac 350-455 / Mopar 318-360 Milodon Windage Tray Install Set

Windage tray install set is required to properly mount the tray assembly. The adjustable mounting position allows the tray to work at its maximum potential by being as close as possible to the rotating assembly (min.100") and...

Product#: T9358

1-1/4 O.D. Push In Oil Baffle/Breather/PCV Grommet; For Steel Valve Covers; 1" I.D.

Valve cover oil baffle grommet set for steel valve covers with 1-1/4" holes. They have a 1" inside diameter, commonly used with breathers. They feature a foam insert and angled slot on the bottom to reduce oil seepage. Sold...

Product#: T9359

1-1/4 O.D. Push In Oil Baffle / Breather / PCV Grommet for Steel Valve Covers - 3/4" I.D.

Valve cover oil baffle grommet set for steel valve covers with 1-1/4" holes. They have a 3/4" inside diameter, commonly used with PCV valves. They feature a foam insert and angled slot on the bottom to reduce oil seepage....